journal article·2017-03

Study on carbide-bearing and carbide-free bainitic steels and their wear resistance

X. Y. Long, F. C. Zhang, J. Kang, Z. N. Yang, D. D. Wu, K. M. Wu, G. H. Zhang

Materials Science and Technology· Volume 33· Issue 5
Publisher page

Abstract

Carbide-free and carbide-bearing bainitic steels have been obtained. The relationship between the bainitic microstructure and wear resistance has been studied. Results show that carbide-free upper and lower bainitic microstructures obtained in the steel with Si + Al mainly consist of bainitic ferrite and retained austenite. Carbide-bearing upper and lower bainitic microstructures obtained in the steel without Si + Al consist of bainitic ferrite, carbide and trace amounts of retained austenite. The carbide-free bainite exhibits higher strength and toughness than carbide-bearing bainite, especially the toughness. Under lower wear loading, carbide-bearing lower bainite (LB) exhibits higher wear resistance. Under higher wear loading, carbide-free LB exhibits higher wear resistance, which results from the improved surface hardness due to strain-induced martensitic transformation from the retained austenite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China

National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, China

The State Key Laboratory of Refractories and Metallurgy, International Research Institute for Steel Technology, Wuhan University of Science and Technology, Wuhan 430081, China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Hebei Province of China · Graduate Student Innovation Fund Project of Hebei Province of China

References (27)

Show source-provided references
1. 10.1179/1743284713Y.000000024210.1179/1743284713Y.0000000242 ↗
2. Zhang F. C. · J. Yanshan Univ. · 2013 · 37 · 1
3. Bhadeshia H. K. D. H. ‘Bainite in steels’, 2nd edn, 63–88; 2001, London, IOM Communications.
4. 10.1107/S160057671600041810.1107/S1600576716000418 ↗
5. 10.2355/isijinternational.39.81310.2355/isijinternational.39.813 ↗
6. 10.1016/B978-075068084-4/50008-X10.1016/B978-075068084-4/50008-X ↗
7. 10.2355/isijinternational.43.182110.2355/isijinternational.43.1821 ↗
8. 10.1007/s11661-014-2555-z10.1007/s11661-014-2555-z ↗
9. 10.1016/S0043-1648(96)07249-310.1016/S0043-1648(96)07249-3 ↗
10. 10.1016/j.matdes.2011.02.03110.1016/j.matdes.2011.02.031 ↗
11. 10.1016/j.msea.2012.04.03110.1016/j.msea.2012.04.031 ↗
12. 10.1016/j.wear.2011.03.02510.1016/j.wear.2011.03.025 ↗
13. 10.1016/j.wear.2012.11.06410.1016/j.wear.2012.11.064 ↗
14. 10.1179/1743284715Y.000000006110.1179/1743284715Y.0000000061 ↗
15. 10.1016/j.wear.2012.02.00810.1016/j.wear.2012.02.008 ↗
16. 10.1016/j.wear.2010.12.02510.1016/j.wear.2010.12.025 ↗
17. 10.1080/02670836.2016.115730010.1080/02670836.2016.1157300 ↗
18. 10.1080/02670836.2015.113204810.1080/02670836.2015.1132048 ↗
19. 10.1007/s12540-012-4012-010.1007/s12540-012-4012-0 ↗
20. 10.1016/j.scriptamat.2004.03.01110.1016/j.scriptamat.2004.03.011 ↗
21. 10.1016/j.matdes.2015.06.17210.1016/j.matdes.2015.06.172 ↗
22. 10.1080/02670836.2015.113741010.1080/02670836.2015.1137410 ↗
23. 10.1179/02670830322500190210.1179/026708303225001902 ↗
24. 10.1016/j.msea.2012.08.08310.1016/j.msea.2012.08.083 ↗
25. 10.1016/j.matdes.2011.06.01810.1016/j.matdes.2011.06.018 ↗
26. 10.1016/j.matchemphys.2014.02.04110.1016/j.matchemphys.2014.02.041 ↗
27. 10.1016/j.msea.2014.08.07110.1016/j.msea.2014.08.071 ↗