Austempering study of unalloyed and alloyed ductile irons
Source abstract
Abstract
Austempered ductile iron (ADI) proved to be an advanced material as it possesses remarkable combination of high strength, ductility and toughness with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields optimum microstructure for a given chemical composition. In the present paper, an investigation has been conducted on unalloyed ADI and alloyed with 0·47%Cu and 1·6%Cu + 1·5%Ni, austempered at 350°C for the time up to the 6 h. The microstructure and fracture mode developed throughout these treatments have been studied by means of light, transmission and scanning electron microscopy, as well as X-ray diffraction. It was shown that the strength, elongation and impact energy strongly depend on amount of ausferritic ferrite and stable, high carbon enriched retained, reacted austenite. Based on the results, optimal processing windows for alloyed ductile irons used, have been established. In addition, for alloyed ADIs with maximum amount of reacted, retained austenite, transition temperature was also obtained.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Production EngineeringFaculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Institute ‘Kirilo Savic'Belgrade, Serbia
Department of Metallurgy and MaterialsSchool of Engineering, University of Birmingham, Birmingham, UK
References (20)
Show source-provided references
1. Harding R. · BICRA Res. Cast Met. Pract · 1991 · 63 · 336
2. 10.1016/0956-7151(94)90412-X10.1016/0956-7151(94)90412-X ↗
3. 10.1179/mst.1997.13.5.40810.1179/mst.1997.13.5.408 ↗
4. 10.1179/mst.1995.11.8.77610.1179/mst.1995.11.8.776 ↗
5. 10.1016/j.matlet.2004.02.04110.1016/j.matlet.2004.02.041 ↗
6. 10.1016/j.matdes.2004.11.02810.1016/j.matdes.2004.11.028 ↗
7. Kovacs V. B.: AFS Trans. 1994, 83, 417–420.
8. 10.1179/mst.1994.10.8.71110.1179/mst.1994.10.8.711 ↗
9. Kovacs V. B. · Mod. Cast · 1987 · 77 · 34
10. 10.1179/mst.1992.8.12.109510.1179/mst.1992.8.12.1095 ↗
11. Ratto P. J. J., Ansaldo A. F., Fierro V. E., Aguera F. R., Alvarez Villar H. N., and Sikora J. A.: ISIJ Int. 2001, 41, 372–380.10.2355/isijinternational.41.372 ↗
12. 10.1179/mst.1997.13.4.31910.1179/mst.1997.13.4.319 ↗
13. Todinov M. T.: Mater. Set Eng. A, 1999, A265,1–6.10.1016/S0921-5093(99)00013-1 ↗
14. Todinov M. T., Novovic M., Bowen P., and Knott J. F.: Mater. Sci. Eng. A, 2000, A287,116–124.10.1016/S0921-5093(00)00824-8 ↗
15. Novovio M. · 2001
16. 10.1111/j.1365-2818.2008.02125.x10.1111/j.1365-2818.2008.02125.x ↗
17. Smallman R. E., and Nagan H. V. ‘Physical metallurgy and advanced materials’, 7th edn, 429; 2007, Oxford, Elsevier.
18. 10.1361/10599490277034372810.1361/105994902770343728 ↗
19. 10.1007/s11661-997-0280-610.1007/s11661-997-0280-6 ↗
20. Rao P. P., and Putatunda S. K.: Mater. Set Eng. A, 2003, A349,136–149.10.1016/S0921-5093(02)00633-0 ↗