journal article·2014-08

On effect of squeezing pressure on microstructural characteristics, heat treatment response and electrical conductivity of an Al-Si-Mg-Ni-Cu alloy

R. Ashiri, F. Karimzadeh, B. Niroumand

Materials Science and Technology· Volume 30· Issue 10
Publisher page

Abstract

The effect of squeezing pressure on the heat treatment response and electrical conductivity of the cast alloy is not clear yet. The present research aims at investigating and elucidating them. It was found that the hardness peak occurred earlier for the pressurised cast alloy during the aging process as compared with non-pressurised one. Squeezing pressure reduces the time required for heat treatment. This significant fact was ignored by most researchers. Pressure also improved the electrical conductivity of the cast alloy. The results showed that the electrical conductivity of samples increases with increasing the aging time and temperature. Moreover, better mechanical properties including high hardness and ultimate tensile strength and good toughness and ductility of the pressurised cast samples indicate that these samples are more reliable to be used for different applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering Isfahan University of Technology, Isfahan 84156-83111, Iran

References (31)

Show source-provided references
1. Chernov DK · Rep. Imper. Russ. Metall. Soc. · 1878 · 12 · 1
2. 10.1016/0261-3069(93)90050-610.1016/0261-3069(93)90050-6 ↗
3. 10.1016/0924-0136(95)02148-510.1016/0924-0136(95)02148-5 ↗
4. 10.1016/S0921-5093(00)01594-X10.1016/S0921-5093(00)01594-X ↗
5. 10.1016/j.matdes.2008.04.01210.1016/j.matdes.2008.04.012 ↗
6. 10.1016/S0921-5093(02)00054-010.1016/S0921-5093(02)00054-0 ↗
7. 10.1016/S0924-0136(00)00527-610.1016/S0924-0136(00)00527-6 ↗
8. 10.1016/S0924-0136(03)00763-510.1016/S0924-0136(03)00763-5 ↗
9. 10.1016/S0924-0136(01)00869-X10.1016/S0924-0136(01)00869-X ↗
10. Franklin J · Br. Foundry · 1984 · 77 · 150
11. 10.1007/s11663-010-9433-x10.1007/s11663-010-9433-x ↗
12. 10.1016/j.jallcom.2008.07.00810.1016/j.jallcom.2008.07.008 ↗
13. 10.1016/j.msea.2006.04.09910.1016/j.msea.2006.04.099 ↗
14. 10.1016/j.jmatprotec.2008.08.03510.1016/j.jmatprotec.2008.08.035 ↗
15. Hamani M: ‘Characterization of the effects of the squeezing pressure on the microstructure and properties of the LM13 pistons alloy’, MSc thesis, Isfahan University of Technology, Isfahan, Iran, 2004.
16. 10.1016/j.matdes.2009.11.03910.1016/j.matdes.2009.11.039 ↗
17. 10.1007/s11661-009-9841-110.1007/s11661-009-9841-1 ↗
18. 10.1007/s11663-001-0112-910.1007/s11663-001-0112-9 ↗
19. 10.1016/j.matdes.2013.02.08810.1016/j.matdes.2013.02.088 ↗
20. 10.1016/j.matdes.2006.04.01210.1016/j.matdes.2006.04.012 ↗
21. 10.1016/j.matdes.2006.04.01110.1016/j.matdes.2006.04.011 ↗
22. 10.1016/S0924-0136(97)00409-310.1016/S0924-0136(97)00409-3 ↗
23. 10.1016/j.jallcom.2013.08.01610.1016/j.jallcom.2013.08.016 ↗
24. Callister WD: ‘Fundamentals of materials science and engineering’, 5th edn; 2004, New York, John Wiley and Sons.
25. Datta J: ‘Key to aluminum’, 5th edn; 1998, Düsseldorf, Aluminum-Verlag Marketing and Kommunikation.
26. 10.1007/s11661-009-0074-010.1007/s11661-009-0074-0 ↗
27. 10.1016/j.matlet.2004.11.04110.1016/j.matlet.2004.11.041 ↗
28. 10.1016/j.matdes.2003.11.00710.1016/j.matdes.2003.11.007 ↗
29. 10.1016/j.matdes.2012.10.02010.1016/j.matdes.2012.10.020 ↗
30. Brooks C: ‘Heat treatment, structure and properties of nonferrous alloys’, Vol. 4; 1982, Materials Park, OH, ASM International.
31. Ashiri R: ‘Optimization of the heat treatment of gravity and squeeze cast LM13 alloys and characterization of their tribological behavior’, BSc thesis, Isfahan University of Technology, Isfahan, Iran, 2005.