Application of Barkhausen noise to biaxial residual stress measurements in welded steel tubes
Source abstract
Abstract
The relationship between Barkhausen noise and biaxial stress was studied in mild steel specimens in as received and annealed conditions. In the as received condition the saturation stress of the Barkhausen noise was higher but the stress sensitivity was lower than in the annealed condition. In the as received condition the Barkhausen noise response was different in the rolling and transverse directions. In the annealed condition no difference was observed. The stress sensitivity was found to be independent of stress perpendicular to the magnetising direction in the annealed condition. In the as received condition the stress sensitivity depended on the perpendicular stress. The biaxially calibrated Barkhausen noise method was applied to residual stress measurements of welded steel tubes. The results were compared with X-ray diffraction and hole drilling results. In the axial direction of the tube all methods produced consistent results. In the hoop direction of the tube Barkhausen noise and X-ray diffraction provided similar results. They were different from those obtained with the hole drilling method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J. LU: ‘Handbook of measurement of residual stresses’, 238; 1997, Lilburn, GA, Fairmont Press.
2. V. HAUK: ‘Structural and residual stress analysis by nondes-tructive methods’, 640; 1997, Amsterdam, Elsevier.
3. 10.1109/20.5399310.1109/20.53993 ↗
4. 10.1109/20.4233210.1109/20.42332 ↗
5. 10.1111/j.1747-1567.1991.tb01193.x10.1111/j.1747-1567.1991.tb01193.x ↗
6. 10.1016/0956-7151(91)90242-S10.1016/0956-7151(91)90242-S ↗
7. 10.1080/0141861980821426610.1080/01418619808214266 ↗
8. 10.1063/1.36451610.1063/1.364516 ↗
9. 10.1109/20.61965110.1109/20.619651 ↗
10. 10.1016/S0963-8695(00)00073-610.1016/S0963-8695(00)00073-6 ↗
11. 10.1179/02670830110150998010.1179/026708301101509980 ↗
12. I. C. NOYAN and J. B. COHEN: ‘Residual stress, measurement by diffraction and interpretation’, 276; 1987, New York, Springer.
13. 10.1115/1.322605910.1115/1.3226059 ↗
14. 10.1115/1.322498810.1115/1.3224988 ↗
15. 10.1243/030932400151407110.1243/0309324001514071 ↗
16. 10.1243/030932498151279710.1243/0309324981512797 ↗
17. 10.1115/1.280592410.1115/1.2805924 ↗
18. 10.1115/1.290432910.1115/1.2904329 ↗
19. 10.1007/BF0233111410.1007/BF02331114 ↗
20. 10.1007/BF0232133110.1007/BF02321331 ↗
21. 10.1080/0141861870821437910.1080/01418618708214379 ↗
22. 10.1063/1.32708410.1063/1.327084 ↗
23. 10.1109/TMAG.1980.106064510.1109/TMAG.1980.1060645 ↗
24. 10.1007/978-3-642-48640-110.1007/978-3-642-48640-1 ↗
25. K. MASUBUCHI: ‘Analysis of welded structures’, 640; 1981, London, Pergamon Press.
26. 10.1111/j.1475-1305.2000.tb01174.x10.1111/j.1475-1305.2000.tb01174.x ↗
27. BEGHINI M. · JTEVA · 1994 · 22 · 522
28. LIN Y. C. · Mater. Sci. TechnoL · 1995 · 11 · 600 — 604
29. 10.1007/BF0232750210.1007/BF02327502 ↗
30. V. A. VINOKUROV: ‘Welding stresses and distortion: determina-tion and elimination’, 317; 1977, Wetherby, UK, British Library.