journal article·2013-07

Fireside issues in advanced power generation systems

N J Simms, J Sumner, T Hussain, J E Oakey

Materials Science and Technology· Volume 29· Issue 7
Publisher page

Abstract

The requirements to supply increasing quantities of electricity and simultaneously to reduce the environmental impact of its production are currently major issues for the power generation industry. Routes to meeting these challenges include the development and use of power plants with ever increasing efficiencies coupled with the use of both a wider range of fuels and technologies designed to minimise CO2 emissions. For fireside hot gas path components, issues of concern include deposition, erosion and corrosion in novel operating environments and increased operating temperatures. The novel operating environments will be produced both by the use of new fuel mixes and by the development of more complex gas pathways (e.g. in various oxyfired or gasification systems). Higher rates of deposition could significantly reduce heat transfer and increase the need for component cleaning. However, degradation of component surfaces has the potential to be life limiting, and so such effects need to be minimised. Materials and operational issues related to these objectives are reviewed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Engineering and Material Science Research · High-Temperature Coating Behaviors · Combustion and Detonation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Energy and Resource Technology, Cranfield University, Cranfield, Bedfordshire MK43 0AL, UK

References (36)

Show source-provided references
1. ‘International energy outlook 2010’, Report no. DOE/EIA-0484, US Energy Information Administration, US Department of Energy, Washington, DC, USA, 2010.
2. Dechamps P · 2006 · 25
3. ‘A roadmap for moving to a competitive low carbon economy in 2050’, Communication from the Commission to the European Parliament, The Council, The European Economic and Social Committee and The Committee of the Regions, COM(2011), 112, 2011.
4. ‘Climate change act 2008’, UK Department of Energy and Climate Change, London, UK, 2008.
5. 10.1179/174892408X37350910.1179/174892408X373509 ↗
6. Farley M · 2007 · 335
7. ‘Co-firing of biomass at UK power plant’, UK DTI Best Practise Brochure BPB009, August 2005, DTI/Pub URN 05/1159.
8. Simms NJ: in ‘Power plant life management and performance improvement’, (ed. , Oakey J E, ed); 2011, Cambridge, Woodhead Publishing Ltd.
9. ‘Solid biofuels – fuel specifications and classes’, DD CEN/TS 14961:2005.
10. 10.3184/096034007X28164010.3184/096034007X281640 ↗
11. Livingston WR · 2009 · 157
12. Henderson PJ · 2002 · 785
13. ‘Solid recovered fuels – specifications and classes’, DD CEN/TS 15359:2006.
14. ‘Life cycle issues in advanced energy systems’, (ed. Norton J F, et al.); 2003, Science Reviews, St. Albans (and Materials at High Temperatures 20 (2), 2003).
15. Simms NJ · 1998 · 663
16. ‘Low emission gas turbine technology for hydrogen-rich syngas’, EU project H2-IGCC, www.h2-igcc.eu.
17. Blum R · 2006 · 41
18. Shingledecker JP · 2006 · 107
19. Natesan K, Purohit A, Rink DL: ‘Coal-ash corrosion of alloys for combustion power plants’, Proc. 17th Annual Conference on Fossil Energy Materials, Baltimore, MD, USA, April 2003, US Department of Energy.
20. 10.1007/BF0104673010.1007/BF01046730 ↗
21. Scheirer ST, Viswanathan R: ‘Evolution of Hot Section Materials Technology’, Proc. ASM Materials Solution Conf., St Louis, MO, USA, October 2000, ASM International.
22. 10.1080/09603409.1997.1168954410.1080/09603409.1997.11689544 ↗
23. Robinson A, Baxter L, Junker H, Shaddix C, Freeman M, James R, Dayton D: ‘Fireside issues associated with coal-biomass co-firing’, NREL report no. TP-570-25767, 1998.
24. ‘Efficiency increases in existing and new build pulverised coal power plants with a view to CCS’, EU NEXTGENPOWER project, www.nextgenpower.eu.
25. ‘United States–United Kingdom collaboration on fossil energy R&D’, www.fossil.energy.gov/international/International_Partners/us-uk_collaboration.html.
26. 10.1002/maco.20080411610.1002/maco.200804116 ↗
27. Bordenet B · Mater. Sci. Forum · 2008 · 261 · 595
28. Hjörnhede A, Montgomery M, Bjurman M, Henderson P, Gerhardt A:‘Preliminary experiences with material testing at the oxyfuel pilot plant at Schwarzepumpe’(, Lecomte-Beckers J, et al.), Proc. 9th Liege Conf. on ‘Materials for advanced power engineering’, Liege, Belgium, September 2010, Forschungszentrum Jülich GmbH, Germany, 1220–1235.
29. 10.1016/j.fuel.2011.03.01010.1016/j.fuel.2011.03.010 ↗
30. Simms NJ, Bale DW, Baxter D, Oakey JE:in ‘Materials for advanced power engineering 2002’(, Lecomte-Beckers J, et al.), 73; 2002, Jülich, Forschungszentrum Jülich.
31. Nicholls · 2006 · 1696
32. Sims CT, Stoloff NS, Hagel WC: ‘Superalloys II’; 1987, John Wiley and Sons, Inc., USA.
33. 10.1108/0003559101105820010.1108/00035591011058200 ↗
34. 10.1179/174892306X9970510.1179/174892306X99705 ↗
35. 10.1016/S0257-8972(01)01499-210.1016/S0257-8972(01)01499-2 ↗
36. Viswanathan R · Adv. Mater. Process. · 2008 · 166 · 47