Niobium microalloying in rail steels
Source abstract
Abstract
Rail steels rely primarily for their properties on wear and rolling-contact-fatigue resistance. These properties, together with toughness, can be optimised by implementing thermo-mechanical processing during rail manufacturing, assisted by controlled additions of strong carbide-forming microalloying elements. Niobium can be used at low concentrations, but the major difficulty is to ensure that niobium does not segregate during casting, especially when rail steels are high in carbon content. The solubility of niobium in ternary Fe–Nb–C austenite is critically assessed to address the issue of segregation. Thereafter, the effect of niobium on medium- and high-carbon (∼0.2–0.8 wt-% C) austenite grain-growth kinetics during reheating or recrystallisation kinetics during hot deformation, and the corresponding effect on pearlitic and bainitic microstructures and mechanical properties are reviewed. This review was chosen as a runner up of the 2017Materials Literature Review Prize of the Institute ofMaterials,Minerals andMining, run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Cultural Artifacts
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science & Metallurgy, University of Cambridge, Cambridge, UK
References (78)
Show source-provided references
1. Bhadeshia HKDH. Steels for rails. In: Buschow K, Cahn RW, Flemings MC, Iischner B, Kramer EJ, Mahajan S, editors. Encyclopedia of materials science: science and technology. Oxford: Pergamon Press; 2007. p. 1–7, Elsevier Science, ISBN 0-08-0431526.
2. Hillert M. The formation of pearlite. In: Decomposition of Austenite by Diffusional Processes: Proceedings of a Symposium Held in Philadelphia, PA; 1960 Oct 19; under the sponsorship of the Ferrous Metallurgy Committee of the Institute of Metals Division, The Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers; 1962. p. 219–247.
3. 10.1007/BF0274849110.1007/BF02748491 ↗
4. Tanaka T · Int Metals Rev · 2013 · 26 · 185
5. 10.1002/srin.20040583710.1002/srin.200405837 ↗
6. Mohrbacher H. Niobium microalloyed automotive sheet steel – a cost effective solution to the challenges of modern body engineering. Niobium microalloyed sheet steels for automotive applications edited by TMS. Araxa, Brazil: The Minerals, Metals and Materials Society; 2006. p. 1–23.
7. 10.1088/1468-6996/13/2/02300110.1088/1468-6996/13/2/023001 ↗
8. 10.1179/1743281215Y.000000006310.1179/1743281215Y.0000000063 ↗
9. Williams JG, Simpson ID, MacDonald JK. Niobium in rail steels. Niobium-Proceedings of the International Symposium, Metallurgical Society of AIME, San Francisco, CA; 1984.
10. De Boer H, Masumoto H. Niobium in rail steel. International Symposium on Niobium; 2001. p. 821–844.
11. Balasubramanian K. Thermodynamics of microalloyed austenites and nonstoichiometric carbides and nitrides [PhD thesis]. Hamilton, Ontario, Canada: McMaster University; 1988.
12. Tanaka T, Ohtani H, Nishizawa T, Hasebe H. In: Proc. Japan-Canada Seminar on Secondary Steelmaking; 1985. p. J–7.
13. DeKazinczy F · Jernkont Ann · 1963 · 147 · 408
14. 10.2355/tetsutohagane1955.50.6_91110.2355/tetsutohagane1955.50.6_911 ↗
15. Narita K · Tetsu To Hagane · 1966 · 52 · 788
16. Meyer L. Dissertation Clausthal Berg. Hulten. [PhD thesis]. 1966.
17. Smith RP · AIME, Trans · 1966 · 236 · 220
18. Augland B · AIME, Trans · 1967 · 239 · 1651
19. Nordberg H · J Iron Steel Inst · 1968 · 206 · 1263
20. Koyama S, Ishii T, Narita K. Effects of Mn, Si, Cr, and Ni on the solution and precipitation of niobium carbide in iron austenite. Japan: Kobe Steel Ltd.; 1971. (Technical report).10.2320/jinstmet1952.35.11_1089 ↗
21. Lakshmanan VK. Thermodynamics of the interstitial phases of niobium in iron austenite [PhD thesis]. Hamilton, Ontario, Canada: McMaster University; 1977.
22. 10.1007/BF0264497910.1007/BF02644979 ↗
23. Huang W · Z Metallkd · 1990 · 81 · 397
24. 10.1007/s11661-001-0033-x10.1007/s11661-001-0033-x ↗
25. Irvine K · Iron Steel Inst J · 1967 · 205 · 161
26. 10.1016/0364-5916(86)90021-010.1016/0364-5916(86)90021-0 ↗
27. Hasebe M, Nishizawa T, Ohtani H. Presentation, Calphad XIV, Boston, MA; 1985.
28. Hasebe M, Ohtani H, Nishizawa T. to be contributed to Met. Trans. A; Referred in [27].
29. Gustafson P · Scand J Metall · 1985 · 14 · 259
30. 10.1007/BF0267555110.1007/BF02675551 ↗
31. 10.1007/s11837-003-0013-210.1007/s11837-003-0013-2 ↗
32. 10.1016/S0364-5916(02)00036-610.1016/S0364-5916(02)00036-6 ↗
33. MatCalc 6 The Materials Calculator. Available at: http://matcalc.tuwien.ac.at/index.php/databases/open-databases [Accessed 1 Dec. 2016].
34. Kestenbach HJ, Itman A, Nishi AM, Roca IB, Valentin C. ‘Metallographic studies of eutectics carbides in high niobium microalloyed steels’, In 4 Brazilian Congress on Materials Science and Engineering, Brazil, 1980.
35. Bernetič J · Metalurgija · 2010 · 49 · 29
36. 10.1179/03063457579044469410.1179/030634575790444694 ↗
37. 10.3139/146.11068810.3139/146.110688 ↗
38. Kumar S · Int J Metall Eng · 2013 · 2 · 179
39. 10.1179/174328409X45326210.1179/174328409X453262 ↗
40. Ming W · Acta Metall Sin · 2014 · 50 · 285
41. Den AWB. Characterization of ferroniobium and the thermodynamics and kinetics of dissolution of niobium compounds in liquid iron [Master's thesis]. Hamilton, Ontario, Canada: McMaster University, 2013.
42. Liu C · Adv Mater Res · 2011 · 163 · 110
43. 10.1179/03063457779043285710.1179/030634577790432857 ↗
44. Nolasco A, Oliveira EQ, Leonardos G, Bordignon PJP. Niobium in Si-Mn rail steel. Proceedings of the Int. Symposium Niobium 81, San Francisco, CA; 1984. p. 1041–1060.
45. 10.1016/S1044-5803(97)00086-710.1016/S1044-5803(97)00086-7 ↗
46. 10.1007/BF0264858110.1007/BF02648581 ↗
47. Jansto SG · Niobium Bearing Struct Steels · 2010 · 1
48. Jansto S. Current niobium developments in high carbon steel applications. MS&T 2011, Materials Science & Technology 2011 Conference and Exhibition (MS&T Partner Societies), Columbus, Ohio; 2011. p. 642–653.
49. Jansto S. Applied metallurgy of the microniobium alloy approach in long and plate products. In Metal; Brno, Czech Republic, EU; 2012.
50. 10.1007/s11663-013-9837-510.1007/s11663-013-9837-5 ↗
51. Jansto S. Metallurgical mechanism and niobium effects on improved mechanical properties in high carbon steels. In: TMS, editor. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015: Conference Proceedings; John Wiley & Sons, Inc., Hoboken, NJ, USA; 2015. p. 981–986.10.1002/9781119223399.ch123 ↗
52. Coladas R, Masounave J, Ballon JP. The hot deformation of austenite, ed. J.B. Balance. New York: AIME; 1977. p. 341–383.
53. Cui Z, Patel J, Palmiere EJ. Thermomechanical processing of structural steels with dilute niobium additions. In: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015: Conference Proceedings; Wiley Online Library; 2015. p. 281–287.10.1002/9781119223399.ch30 ↗
54. 10.2355/tetsutohagane1955.73.9_116210.2355/tetsutohagane1955.73.9_1162 ↗
55. Cotrina E, López B, Rodriguez-Ibabe JM. Influence of thermomechanical treatment on the austenite-pearlite transformation in a high carbon nb-microalloyed steel. Symposium on the Thermodynamics, Kinetics, Characterization and Modeling of Austenite Formation and Decomposition; 2003. p. 213–225.
56. Sugino K, Kageyama H, Masumoto H. Development of weldable high-strength steel rails. Proc. Second Heavy Haul Railway Conference, Paper; 1982. p. 187–196.
57. Yang Z, Wang H, Ji Y. Study on Nb microalloying in high carbon pearlite steels for rails. In: TMS, editor. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015: Conference Proceedings; John Wiley & Sons, Inc., Hoboken, NJ; 2015. p. 987–993.10.1002/9781119223399.ch124 ↗
58. Mauritczat L · Berg- und Httenmnnische Monatshefte · 1984 · 129 · 25
59. Singh UP · Scand J Metall · 1995 · 24 · 180
60. Miller SL. Effect of microalloying on pearlite transformation of high carbon wire steels [PhD thesis]. Golden, CO: Colorado School of Mines; 2007.
61. 10.1111/j.1365-2818.2011.03601.x10.1111/j.1365-2818.2011.03601.x ↗
62. Bhadeshia HKDH · 2011
63. 10.1016/0036-9748(87)90207-910.1016/0036-9748(87)90207-9 ↗
64. Rodriguez-Ibabe JM, López B. Thermomechanical processing and role of microalloying in eutectoid steels. In: Weng Y, Dong H, Gan Y, editors. Advanced Steels; Heidelberg: Springer; 2011. p. 475–484.10.1007/978-3-642-17665-4_47 ↗
65. 10.1007/BF0281169810.1007/BF02811698 ↗
66. Mendizabal L, Iza-Mendia A, López B, Rodriguez-Ibabe JM. Influence of vanadium microaddition on the microstructure and mechanical properties of high strength large diameter wire-rods. In: Rodriguez-Ibabe JM, Gutiérrez I, López B, Iza-Mendia A, editors. Microalloying for New Steel Processes and Applications, Materials Science Forum. Vol. 500; Donostia-San Sebastián, Basque Country, Spaine: Trans Tech Publ.; 2005. p. 761–770.10.4028/www.scientific.net/MSF.500-501.761 ↗
67. Magel E. Rolling contact fatigue: a comprehensive review. No. DOT/FRA/ORD-11/24; 2011.
68. 10.1016/j.pmatsci.2011.06.00210.1016/j.pmatsci.2011.06.002 ↗
69. Steele RK, Reiff RP. Rail: its behavior and relationship to total system wear; Included in Proceedings of FAST (Facility for Accelerated Service Testing) Engineering Conference, Denver, Colorado, 1981, p. 115–164(a).
70. Daniels LE, Blume N. Rail corrugation growth performance. Second International Heavy Haul Railway Conference, Colorado Springs, CO; 1982. p. 294–318.
71. Yokoyama H, Mitao S, Yamamoto S, Kataoka Y, Sugiyama T. High strength bainitic steel rails for heavy haul railways with superior damage resistance; NKK Technical Report – Japanese Edition, Chiyoda, Tokyo: JFE Steel; 2000. p. 17–23.
72. 10.1016/0921-5093(94)09673-210.1016/0921-5093(94)09673-2 ↗
73. 10.1179/02670830177300249110.1179/026708301773002491 ↗
74. Tsuzaki K · New Mater Process Future · 1989 · 799
75. Bhadeshia HKDH. Bainite in steels. London, UK: Institute of Metals; 1992.
76. 10.1179/02670839910150621010.1179/026708399101506210 ↗
77. 10.1179/mst.1995.11.11.111610.1179/mst.1995.11.11.1116 ↗
78. Bhadeshia HKDH · Hot Workability Steels Light Alloys-Compos · 1996 · 543