Production of injection moulded 316L stainless steels reinforced with TiC(N) particles
Source abstract
Abstract
Metal matrix composites, based on 316L stainless steel and reinforced with TiC and TiCN particles, were manufactured following a powder injection moulding route: mixing, preparation of feedstock, moulding, debinding and sintering. The 316L stainless steel and carbide powders were dry mixed and moulded with wax based binder. The critical powder loading for injection moulding was 62·5 vol.-% for all samples. Binder debinding was performed by solvent and thermal method. After debinding, the samples were sintered at 1250 and 1385°C for 1 h in pure H2. Metallographic studies were conducted to extend densification and the corresponding microstructural changes. The sintered samples were characterised by measuring tensile strength, hardness and wear behaviour. Wear loss was determined for all samples after wear tests. All powder, fracture surfaces of moulded and sintered samples, and worn surfaces of all the samples, were examined using scanning electron microscope. The sintered density of injection moulded 316L stainless steel samples, reinforced and unreinforced, increases with increasing sintering temperature. The addition of TiC and TiCN improves the hardness and wear resistance with increasing sintering temperature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. German R. M., and Bose A. ‘Injection molding of metals and ceramics’, 259; 1997, Princeton, NJ, MPIF.
2. German R. M. ‘Powder injection molding’, 110; 1990, Princeton, NJ, MPIF.
3. 10.1016/j.scriptamat.2004.09.03210.1016/j.scriptamat.2004.09.032 ↗
4. 10.1016/S0924-0136(00)00855-410.1016/S0924-0136(00)00855-4 ↗
5. 10.1016/S0921-5093(01)01941-410.1016/S0921-5093(01)01941-4 ↗
6. Zhang T. · Int. J. Powder Metall · 1996 · 32 · 331
7. 10.1179/pom.1993.36.4.26710.1179/pom.1993.36.4.267 ↗
8. Lima W. M. · Mater. Sci. Forum · 1999 · 299 · 431
9. Lal S. · Powder Metall. Int · 1988 · 20 · 35
10. Mukherjee S. K. · Powder Metall. Int · 1985 · 17 · 172
11. 10.1016/S1359-835X(02)00024-610.1016/S1359-835X(02)00024-6 ↗
12. Pardo A., Merino M. C., Coy A. E., Viejo F., Carboneras M., and Arrabal R.: Acta Mater. 2007, 5, 239–2251.
13. 10.1179/174328407X16120410.1179/174328407X161204 ↗
14. 10.1179/mst.1995.11.8.79910.1179/mst.1995.11.8.799 ↗
15. MPIF: ‘Materials standards for metal injection molded parts’, Standard 50; 2001, Princeton, NJ, MPIF.
16. 10.1016/j.matlet.2003.12.02210.1016/j.matlet.2003.12.022 ↗