journal article·2009-09

Microstructure evolution model for hot strip rolling of Nb–Mo microalloyed complex phase steel

S. Sarkar, M. Militzer

Materials Science and Technology· Volume 25· Issue 9
Publisher page

Abstract

A microstructure model for hot strip rolling of an Nb–Mo microalloyed complex phase steel has been proposed. The constitutive behaviour of austenite is described by the Kocks–Mecking model. The static softening kinetics is simulated by a combined recovery recrystallisation model using the law of mixtures. Ferrite transformation start is modelled with an approach that considers the early growth of corner nucleated ferrite. Bainite start is related to a critical driving pressure. Both ferrite and bainite reactions are described using the Johnson–Mehl–Avrami–Kolmogorov (JMAK) approach in combination with the additivity rule. The martensite fraction is empirically related to the carbon enrichment in austenite and is, thus, a function of the ferrite fraction formed in the final microstructure. Precipitation strengthening during coiling is simulated with a modified Shercliff–Ashby model. The microstructure models for these metallurgical phenomena have been validated with experimental studies of laboratory simulated hot strip rolling conditions and run-out table cooling strategies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Centre for Metallurgical Process EngineeringThe University of British Columbia, 309-6350 Stores Rd., Vancouver, BC, V6T 1Z4, Canada

References (58)

Show source-provided references
1. 10.1179/09506600322500883310.1179/095066003225008833 ↗
2. 10.1126/science.107821010.1126/science.1078210 ↗
3. Shaw J., Engl B., Espina C., Oren E. C., and Kawamoto Y.: in ‘New steel sheets and steel bar products and processing’, SAE-SP 1685, (ed. D. W. Anderson et al), 63-71; 2002, Warrendale, PA, SAE.
4. Pyshmintsev I. Y., Mesplont C., Jacobs S., and de Cooman B. C.: Steel Res. 2002, 73, 392–402.10.1002/srin.200200005 ↗
5. 10.1179/03063457379044549710.1179/030634573790445497 ↗
6. Mesplont C., Vandeputte S., and De Cooman B. C.: Proc. 43rd Mechanical Working and Steel Processing Conf., Vol. XLIII, Warrendale, PA, USA, 2001, ISS,359–371.
7. ‘Advanced high strength steel (AHSS) application guidelines’, report, Version 3, International Iron and Steel Institute, Committee on Automotive Application, September, 2006.
8. 10.1179/msc.1979.13.3-4.18710.1179/msc.1979.13.3-4.187 ↗
9. Sellars C. M. ‘Sheffield Int. Conf. on “Working and forming processes”, (ed.Sellars C. M., and Davies G. J.), 3-15; 1980, London, Met. Soc.
10. 10.2355/isijinternational1966.27.43910.2355/isijinternational1966.27.439 ↗
11. Beynon J. H., and Sellars C. M.: ISIJ Int. 1992, 32, 359–367.10.2355/isijinternational.32.359 ↗
12. Kwon O., Lee K. J., Lee J. K., Kang K. B., Kim J. K., Lee J. D., and Kim J.: in ‘HSLA Steels'95’, (ed.Liu G. et al), 82-89; 1995, Beijing, China Science & Technology Press.
13. Andorfer J., Auzinger D., Buchmayr B., Giselbrecht W., Hribernig G., Hubmer G., Luger A., and Samoilov A. ‘Thermec'97’, (ed.Chandra T., and Sakai T.), 2069-2075; 1997, Warrendale, PA, TMS.
14. Samarasekera I. V., Jin D. Q., and Brimacombe J. K.: Proc. 38th Mechanical Working Steel Processing Conf., Vol. XXXIV, Warrendale, PA, USA, 1997, ISS,313–327.
15. 10.1179/03019230167791110.1179/030192301677911 ↗
16. 10.1016/S0921-5093(96)10490-110.1016/S0921-5093(96)10490-1 ↗
17. 10.1179/174328105X4589310.1179/174328105X45893 ↗
18. 10.1002/srin.20040579710.1002/srin.200405797 ↗
19. Hodgson P. D., and Gibbs R. K.: ISIJ Int. 1992, 32, 1329–1338.10.2355/isijinternational.32.1329 ↗
20. Buchmayr B., Samoilov A., Lachmann L., and Aigmuller G.: Proc. 1st Int. Conf. on ‘Modelling of metal rolling process’, 134-148; 1993, London, The Institute of Materials.
21. 10.1016/S0924-0136(02)00285-610.1016/S0924-0136(02)00285-6 ↗
22. 10.1007/s11661-000-0120-410.1007/s11661-000-0120-4 ↗
23. 10.4028/www.scientific.net/MSF.539-543.439110.4028/www.scientific.net/MSF.539-543.4391 ↗
24. Liu D., Fazeli F., and Militzer M.: ISIJ Int. 2007, 47, 1789–1798.10.2355/isijinternational.47.1789 ↗
25. Samoilov A., Titovets Y., Zolotorevskii N., Hribernig G., and Stiaszny P.: Proc. 2nd Int. Conf. on ‘Processing materials for properties’, (ed.Mishra B., and Yamauchi C.), 639-643; 2000, Warrendale, PA, TMS.
26. Fazeli F., and Militzer M.: Steel Res. 2002, 73, 242–248.10.1002/srin.200200203 ↗
27. Fazeli F., and Militzer M. ‘Solid-solid phase transformations in inorganic materials 2005’, (ed. J. M. Howe et al), 835-841; 2005, Warrendale, PA, TMS.
28. 10.1179/02670830110151044710.1179/026708301101510447 ↗
29. 10.1007/s11661-007-9116-710.1007/s11661-007-9116-7 ↗
30. 10.1002/srin.20050610010.1002/srin.200506100 ↗
31. Sarkar S., Poole W. J., and Militzer M. ‘Advances in materials and materials processing (ICAMMP-2006)’, (ed.Chatterjee U. K., and Dhindaw B. K.), 682–692; 2006, Kharagpur, ITT.
32. Sarkar S., Militzer M., Poole W. J., and Moreau A.: in ‘Advanced steels’, (ed.Szpunar J. A., and Li H.), 119-130; 2006, Montreal, PQ, The Metallurgical Society of CIM.
33. 10.1007/s11661-007-9461-610.1007/s11661-007-9461-6 ↗
34. 10.1007/BF0335455310.1007/BF03354553 ↗
35. ‘ 1994 annual book of ASTM standard’, E112-881994, 3.01, ASTM, 227.
36. Giumelli A., Militzer M., and Hawbolt E. B.: ISIJ Int. 1999, 39, 271–280.10.2355/isijinternational.39.271 ↗
37. 10.1016/S0079-6425(02)00003-810.1016/S0079-6425(02)00003-8 ↗
38. Frost H. J., and Ashby M. F. ‘Deformation mechanism maps’, 20; 1982, Oxford, Pergamon Press.
39. 10.1016/0956-716X(93)90169-S10.1016/0956-716X(93)90169-S ↗
40. Zurob H. S., Hutchinson C. R., Brechet Y., and Purdy G.: Acta Mater. 2002, 50, 3075–3092.10.1016/S1359-6454(02)00097-6 ↗
41. Sarkar S. · Proc. Int. Symp. on ‘Advanced high-strength and other specialty sheet steel products for the automotive industry’, MST'07, AIST/TMS, Warrendale, PA, USA, 2007, · 61
42. Guyot P., Verdier M., and Brechet Y.: Acta Mater. 1998, 47, 127–134.10.1016/S1359-6454(98)00350-4 ↗
43. 10.1016/S0924-0136(02)00285-610.1016/S0924-0136(02)00285-6 ↗
44. Sun W. P. · ISS · 1998 · 25 · 85
45. Humphreys F. J., and Hatherly M. ‘Recrystallization and related annealing phenomena’ 2nd edn; 1996, Oxford, Pergamon Press Ltd.10.1016/B978-0-08-041884-1.50017-9 ↗
46. Militzer M.: ISIJ Int. 2007, 47, 1–15.10.2355/isijinternational.47.1 ↗
47. Gjostein N. A., Domian H. A., Aaronson H. I., and Eichen E.: Acta Metall. 1966, 14, 1637–1644.10.1016/0001-6160(66)90016-2 ↗
48. 10.1016/S0921-5093(02)00374-X10.1016/S0921-5093(02)00374-X ↗
49. 10.1007/s11661-004-0296-010.1007/s11661-004-0296-0 ↗
50. Lacroix S., Brechet Y., Veron M., Quidort D., Kandel M., and LUNG T. ‘Austenite formation and decomposition’, (ed.Damm E. B., and Merwin M. J.), 367-379; 2003, Warrendale, PA, TMS.
51. 10.1007/BF0264981410.1007/BF02649814 ↗
52. 10.1016/0036-9748(86)90384-410.1016/0036-9748(86)90384-4 ↗
53. 10.1179/mst.1990.6.8.78110.1179/mst.1990.6.8.781 ↗
54. Militzer M., Poole W. J., and Sun W. P.: Steel Res. 1998, 69, 279–285.10.1002/srin.199805550 ↗
55. Nakata N., and Militzer M.: ISIJ Int. 2005, 45, 82–90.10.2355/isijinternational.45.82 ↗
56. Shercliff H., and Ashby M. F.: Acta Metall Mater. 1990, 38, 1789–1802.10.1016/0956-7151(90)90291-N ↗
57. 10.1007/s11661-001-0142-610.1007/s11661-001-0142-6 ↗
58. Militzer M., Sarkar S., Mukherjee K., Azizi-Alizamini H., and Poole W. J.: Proc. New Developments on Metallurgy and Applications of High Strength Steels, 2008, Buenos Aires, SAM association Argentina de Materiales.