journal article·1996-01

Characteristics and prevention of thermomechanical controlled process plate deflection resulting from uneven cooling

Shyi-Chin Wang, Fon-Jen Chiu, Tsan-Ying Ho

Materials Science and Technology· Volume 12· Issue 1
Publisher page

Abstract

The thermomechanical controlled process (TMCP) plates manufactured by this accelerated cooling process may have serious and complicated deflection problems resulting from uneven cooling and consequent thermal stresses. The deflections of TMCP plates were classified into first, second, and third deflections according to the stage at which they occur. Each type of deflection was analysed by applying thermal stress and elastic instability theory to the related temperature deviation. Accordingly, the cooling processes, such as top/bottom flow ratio, cooling water on/off timing, and amount of edge masking, were modified to improve the uniformity of cooling. In addition, a theoretical prediction model was developed which could estimate the deflections of plates during air cooling and after splitting into narrow strips, from the measured temperature distribution after hot levelling. Based on the result of this theoretical calculation, the requirements for stress relief treatment such as the cold levelling of each plate could be determined.MST/3195
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. TSUKADA K. · NKK Tech. Rep. (Overseas) · 1982 · 35 · 24
2. MATSUDA H. · Nippon Steel Tech. Rep. · 1983 · 21 · 217
3. 10.1179/cmq.1988.27.2.14110.1179/cmq.1988.27.2.141 ↗
4. TSUKADA K. · NKK Tech. Rep. (Overseas) · 1981 · 35 · 35
5. KUSHIDA T. · Sumitomo Res. · 1988 · 37 · 83
6. NAICANO Y. · Kawasaki Steel Tech. Rep. · 1986 · 18 · 301
7. TSUKADA K. · NKK Tech. Rep. (Overseas) · 1983 · 39 · 31
8. KUSUHARA Y. · Kawasaki Steel Tech. Rep. · 1985 · 13 · 77
9. TERASAKI F. · Sumitomo Met. · 1985 · 37 · 64
10. YOSHCHAR N. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1989 · 75 · 131610.2355/tetsutohagane1955.75.8_1316 ↗
11. YOSHIDA H. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1982 · 68 · 96510.2355/tetsutohagane1955.68.8_965 ↗
12. YOSHIHARA N. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1988 · 74 · 83910.2355/tetsutohagane1955.74.5_839 ↗
13. OHE K. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1983 · 69 · S1273
14. TAKAHASHI I. · Kobe Steel Eng. Rep. · 1985 · 35 · 87
15. SHIGEFUJI H. · NSC Tech. Rep. · 1990 · 338 · 43
16. NAKAMUI2A S. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1984 · 70 · A201
17. OHE K. · Kobe Steel Eng. Rep. · 1991 · 41 · 52