Al,Zr–FeSi preconditioning of grey cast irons
Source abstract
Abstract
Laboratory research has been conducted to investigate the effect of strong deoxidising elements such as Al, Zr or Ti in preconditioning of uninoculated and inoculated grey irons. Experimental heats were performed in an acid lined crucible induction furnace at 3˙7–3˙9% carbon equivalent, 5˙5–6˙5 Mn/S ratio and, <0˙005%Al and Ti. The content of 0˙027–0˙028%Al, 0˙011–0˙017%Ti or 0˙011–0˙013%Zr was obtained in preconditioned irons. Not only inoculation but also the preconditioning of the base iron has a strong effect on the solidification pattern. Preconditioning led to an improved level measuring the most significant temperatures of cooling curves and resulted in a positive trend of eutectic and of the end of solidification representative parameters, in both uninoculated and inoculated irons. A foundry case study is represented to illustrate the efficiency of Al and Zr bearing FeSi preconditioning of electrically melted, inoculated grey iron: decreasing the eutectic undercooling and recalescence, improved graphite characteristics, avoiding carbides, increased tensile strength, while heat treatment was eliminated, for 5 mm sections castings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Loper C. R. · AFS Trans · 1999 · 107 · 523
2. Loper C. R. · Proc. AFS Int. Inoc. Conf., Rosemont, IL, USA, April 1998, AFS, Paper 01.
3. 10.1007/BF0264860510.1007/BF02648605 ↗
4. Stefanescu D. M.: Proc. AFS Int. Inoc. Conf., Rosemont, IL, USA, April 1998, AFS, Paper 16.
5. Chisamera M., Riposan I., and Barstow M.: Proc. AFS Int. Inoc. Conf., Rosemont, IL, USA, April 1998, Paper 03.
6. 10.1080/13640461.2003.1181956710.1080/13640461.2003.11819567 ↗
7. Riposan I. · AFS Trans · 2001 · 109 · 1151
8. Riposan I. · Proc. Cast Iron Inoc. Conf., Schaumburg, IL, USA, September 2005, AFS, · 31
9. Riposan I., Chisamera M., Stan S., Ecob C., and Wilkinson D.: World Foundry Org. (WFO) Techn. Forum, Dusseldorf, Germany, June 2007, GIFA, Poster Session, Paper 01.
10. Riposan I., Chisamera M., Stan S., Toboc P., and Ecob C.: 68th World Foundry Cong., Chennai, India, February 2007, The Institute of Indian Foundrymen, Paper 53.
11. Sillen R. V.: Proc. AFS Int. Inoc. Conf., Rosemont, IL, USA, April 1998, AFS, Paper 04.
12. Sillen R. V.: Novacast Technologies, 2006, available at: www.novacast.se.
13. Sparkman D. · AFS Trans · 1994 · 102 · 229
14. Sparkman D. · AFS Trans · 1996 · 104 · 969
15. Degirmenci S., Gunay Y., Metan I., and Sirin B.: Proc. 66th World Foundry Cong., Istanbul, Turkey, September 2004, WFO,757–774.
16. ‘Preseed preconditioner booklet’, ELKEM Foundry Products Division, 2007, available at: www.foundry.elkem.com.