journal article·2014-05

Plastic properties and constitutive equations of 42CrMo steel during warm forming process

Y. Y. Li, S. D. Zhao, S. Q. Fan, B. Zhong

Materials Science and Technology· Volume 30· Issue 6
Publisher page

Abstract

In order to obtain the practical warm forming process parameters of 42CrMo steel in manufacturing, the plastic properties and constitutive equations of 42CrMo steel during the warm forming process are investigated through the isothermal compression tests. The results show that the true stress of 42CrMo steel increases as the forming temperature decreases and the strain rate increases; the strain rate sensitivity increases as the forming temperature increases, but decreases when the forming temperature is >750°C; the maximum strain rate sensitivity exponent 0·0988 appears at 700°C and the true strain of 0·65; the temperature sensitivity decreases as the strain rate and true strain increase; the strain hardening exponent decreases slowly as the true strain increases under the strain rates of 0·01, 0·1 and 1 s−1, but it decreases sharply under the strain rate of 10 s−1, especially the strain hardening exponent increases when the true strain is >0·55 under 750°C and the strain rate is 0·01s−1. Furthermore, the developed constitutive equations represented by a Zener–Hollomon parameter could give a precise estimate (correlation coefficient: R = 0·99) for the plastic flow behaviour of 42CrMo steel during the warm forming process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Institute of Tool&Die Technology and Metal Forming, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China

References (19)

Show source-provided references
1. 10.1016/j.commatsci.2010.07.02110.1016/j.commatsci.2010.07.021 ↗
2. 10.1016/j.mechrescom.2007.10.00210.1016/j.mechrescom.2007.10.002 ↗
3. 10.1016/j.commatsci.2008.01.03910.1016/j.commatsci.2008.01.039 ↗
4. Guan W. D. ‘Construction of automobile’, 3rd edn; 2010, Beijing, China Machine Press.
5. 10.1016/0924-0136(92)90325-M10.1016/0924-0136(92)90325-M ↗
6. Aritzur B. ‘Handbook of metal-forming processes’; 1983, New York, John Wiley and Sons.
7. 10.1016/j.jmatprotec.2007.11.11310.1016/j.jmatprotec.2007.11.113 ↗
8. 10.1016/j.msea.2007.11.11910.1016/j.msea.2007.11.119 ↗
9. 10.1016/j.commatsci.2007.08.01110.1016/j.commatsci.2007.08.011 ↗
10. Schubert R. ‘Technical papers’, 1–15; 2003, Dearborn, Society of Manufacture Engineers.
11. 10.1016/S0924-0136(00)00602-610.1016/S0924-0136(00)00602-6 ↗
12. 10.1016/j.msea.2009.02.02810.1016/j.msea.2009.02.028 ↗
13. 10.1016/S1006-706X(10)60096-910.1016/S1006-706X(10)60096-9 ↗
14. Backfen W. A. · ASM Trans. Q. · 1964 · 57 · 980
15. 10.1016/j.msea.2012.01.02110.1016/j.msea.2012.01.021 ↗
16. 10.1016/j.msea.2012.02.09010.1016/j.msea.2012.02.090 ↗
17. 10.1179/1743284712Y.000000014010.1179/1743284712Y.0000000140 ↗
18. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
19. 10.1063/1.170736310.1063/1.1707363 ↗