Effects of composition and processing parameters on precipitation and texture formation in microalloyed interstitial free high strength (IFHS) steels
Source abstract
Abstract
Precipitation in IFHS steels affects texture formation during annealing, which in turn determines the formability. The single most important type of precipitates in IFHS steels is FeTiP. Precipitation of FeTiP leads to the decrement in the intensity of the favourable {111} texture, which causes a degradation of the formability properties. The batch annealed steels are particularly susceptible to this. Since formation of FeTiP as well as of the other types of precipitates in IFHS steels is dependent on steel composition and processing parameters, a detailed and systematic investigation is urgently needed to look into the various aspects of precipitation in IFHS steels. Proper scientific investigation is expected to provide necessary processing windows that will not allow formation of unwanted precipitates. This will help in maximising the strengthening effects of P, without any degradation of the deep drawability of the steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
R & D DivisionTata Steel, Jamshedpur, Jharkhand 831 001, India
References (74)
Show source-provided references
1. Meyer L. · Proc. Int. Forum for Physical Metallurgy of IF Steels, Tokyo, Japan, 1994, ISIJ, · 203
2. Huchinson W. B. · Int. Mater. Rev · 1984 · 29 · 113
3. Mishra S. · Int. Mater. Rev · 1982 · 27 · 131
4. 10.1179/imr.1994.39.4.12910.1179/imr.1994.39.4.129 ↗
5. 10.1179/02670830010150690210.1179/026708300101506902 ↗
6. 10.1016/0956-716X(93)90065-Z10.1016/0956-716X(93)90065-Z ↗
7. DeArdo A. J. · Proc. Int. Forum for Properties and Application of IF Steels, Tokyo, Japan, May 2003, ISIJ, · 240
8. DeArdo A. J. · IF Steels Proc · 2000 · 125 · 6
9. Tither G. · Proc. Int. Forum for Physical Metallurgy of IF Steels, Tokyo, Japan, 1994, ISIJ, · 293
10. Hua M., Garcia C. I., and DeArdo A. J.: Proc. 40th MWSP Conf., Warrendale, PA, USA, 1998, ISS, Vol. XXXVI, 877.
11. Ruiz-Aparicio L. J. · Metall. Mater. Trans. A · 2001 · 32 · 417
12. Ruiz-Aparicio L. J., Garcia C. I., and DeArdo A. J.: Proc. IF Steels, Warrandale, PA, USA, 2000, ISS, 85.
13. 10.1007/s11661-997-0108-410.1007/s11661-997-0108-4 ↗
14. 10.1016/j.scriptamat.2006.03.04310.1016/j.scriptamat.2006.03.043 ↗
15. 10.1016/j.scriptamat.2006.12.04410.1016/j.scriptamat.2006.12.044 ↗
16. 10.1016/j.scriptamat.2007.04.00310.1016/j.scriptamat.2007.04.003 ↗
17. Huchinson W. B., Nilson K., and Hirsch J. ‘Metallurgy of vacuum degassed steel products’, 109-126; 1990, Warrendale, PA TMS.
18. Held F. J. · Proc. Mech. Working Steel Process. Conf., Pittsburgh, PA, USA, 1965, ISS, · 3
19. 10.4028/www.scientific.net/MSF.157-162.191710.4028/www.scientific.net/MSF.157-162.1917 ↗
20. Krauss G., Wilshynsky D. O., and Matlock D. K. ‘Interstitial free steel sheets: processing, fabrication and properties’, (ed.Collins L. E., and Baragar D. L.), 1-14; 1991, Ottawa, CIM/ICM.
21. de-Cooman B. C. · Proc. Int. Forum for Properties and Application of IF Steels, Tokyo, Japan, 2003, ISIJ · 249
22. Kato C. · Proc. Physical Metallurgy of Zinc Coated Steel, Warrendale, PA, USA, 1993, TMS-AIME, · 241
23. Gupta I., and Scime R.: Proc. 21st Mechanical Working and Steel Processing Conf. Proc., Warrendale, PA, USA, 1979, ISS-AIME, Vol. XVII,260–276.
24. Rege J. S., Garcia C. I., and DeArdo A. J.: Proc. 39th MWSP Conf., Warrendale, PA, USA, 1997, ISS, Vol. XXXV,149–158.
25. Mizui N. · Proc. Int. Symp. on ‘Modern LC and ULC sheet steels for cold forming: processing and properties’, (ed.
26. Renavikar M. P. · Proc. Int. Forum for Properties and Application of IF Steels, Aachen, Germany, March—April 2003, RWTH, · 276
27. Renaviker M. P. · 2003 · Pittsburgh
28. Rege J. S., Garcia C. I., and DeArdo A. J.: Proc. IF Steels, Warrendale, PA, USA, 2000, ISS, 327.
29. Takechi H.: ISIJ Int. 1994, 34, (1), 1–8.10.2355/isijinternational.34.1 ↗
30. Sakata K. ‘Advanced technology of microstructural control in steel and titanium’, 161st and 162nd Nishiyama Memorial Lecture, 83; 1996, Tokyo, ISIJ.
31. Suda B. · Tetsu-to-hagane · 1983 · 69 · S1365
32. Yasuhara E., Sakata K., Kato T., and Hashimoto O.: ISIJ Int. 1994, 34, (1), 99–107.10.2355/isijinternational.34.99 ↗
33. Yasuhara E., Sakata K., Kato T., and Hashimoto O. ‘Physical metallurgy of IF steels’, 223; 1993, Tokyo, ISIJ.
34. Yamada M. · Tetsu-to-Hagane · 1987 · 73 · 1094
35. Hosoya Y., Hashimoto T., and Nishimoto A. ‘Physical metallurgy of IF steels, 179; 1993, Tokyo, ISIJ.
36. 10.2355/tetsutohagane1955.75.5_77410.2355/tetsutohagane1955.75.5_774 ↗
37. Haga J., Mizui N., Nagamichi T., and Okamoto A.: ISIJ Int. 1998, 38, (6), 580–586.10.2355/isijinternational.38.580 ↗
38. Hudd R. C. · Met. Mater · 1997 · 71
39. Kwon O. · Proc. Int. Forum for Properties and Application of IF Steels, Tokyo, Japan, 2003, ISIJ, · 39
40. Cho W. · Steelmaking Conf. Proc · 2002 · 453 · 1
41. Verdeja L. F., Sancho J. P., and Verdeja J. I.: Rev. Minas, 200, 19,33–40.
42. 10.2320/matertrans1960.23.71810.2320/matertrans1960.23.718 ↗
43. Kino N. · CAMP-ISIJ · 1990 · 3 · 785
44. Satoh S. · Kawasaki Steel Tech. Rep · 1985 · 12
45. Sanagi S. · CAMP-ISIJ · 1990 · 3 · 1768
46. Kwon O. · Proc. Int. Forum for Physical Metallurgy of IF Steels, Tokyo, Japan, 1994, ISIJ, · 9
47. Gupta I. · Proc. Symp. on ‘Hot & cold rolled sheet steels’, (ed.
48. 10.2355/tetsutohagane1955.73.16_222710.2355/tetsutohagane1955.73.16_2227 ↗
49. 10.1002/srin.19950115610.1002/srin.199501156 ↗
50. Yoda R. · CAMP-ISIJ · 1993 · 6 · 747
51. Satoh S. · Kawasaki Steel Tech. Rep · 1984 · 16 · 273
52. Furono Y. · Tetsu-to-Hagane · 1987 · 72S637
53. Kwon O., Kim G., and Chang R. W. ‘Metallurgy of vacuum degassed steel products’, (ed.Pradhan R.), 215-228; 1990, Warrendale, PA, TMS-AIME.
54. Hashimoto O.: Proc. Int. Conf. on ‘Advances in physical metall. and applications of steel’, Book 284, 95-104; 1982, London, The metals society of Great Britain.
55. Tokunaga Y., and Tamada M.: US patent 4,504,326.
56. Gupta I., and Bhattacharya D.: Metallurgy of Vacuum degassed Steel Products, TMS, The Minerals, Metals and Materials Society, Prodham R. (ed.), 1990, 43–72.
57. Nadif M. · Steelmaking Conf. Proc · 1989 · 227
58. 10.1016/S0921-5093(99)00737-610.1016/S0921-5093(99)00737-6 ↗
59. Yoshinaga N., Ushioda K., Akamatsu S., and Akisue O.: ISIJ Int. 1994, 34, (1), 24–32.10.2355/isijinternational.34.24 ↗
60. Okamoto A., and Mizui N. ‘Metallurgy of vacuum degassed steel products’, (ed. R Pradhan), 161-180; 1990, Warrendale, PA, TMS.
61. Tsunoyama K., Sakata K., Obara T., Satoh S., Hashiguchi K., and Irie T. ‘Hot and cold rolled sheet steels’, (ed.Pradhan R., and Ludkovsky G.), 155-164; 1988, Warraendale, PA, TMS-AIME.
62. Hua M, Garcia C. I., Eloot K., and DeArdo A. J.: ISIJ Int. 1997, 37, (11), 1129–1132.10.2355/isijinternational.37.1129 ↗
63. Lee K · International forum for the properties and application of IF steels · 2003 · 286
64. Hamart O. · Proc. 40th MWSP Conf · 1998 · 18 · 9
65. Gladman T. ‘Physical metallurgy of microalloyed steels’, 1977, Berlin, Springer, 1977.
66. Han S. H., Kang H. J., Chung J. H.: Proc. IF STEELS, Warrendale, PA, USA, 2000, ISS, 157.
67. Wang L. · Proc. Int. Forum for Properties and Application of IF Steels, Tokyo, Japan, 2003, ISIJ, · 298
68. Subramanian S. V. · Proc. Int. Symp. Canadian Inst. Mining and Metallurgy · 1991
69. 10.1007/BF0266549410.1007/BF02665494 ↗
70. 10.1007/BF0265027710.1007/BF02650277 ↗
71. Liu W. J., Jonas J. J., Bouchard D., and Bale C. W.: ISIJ Int. 1990, 30, 985–990.10.2355/isijinternational.30.985 ↗
72. 10.2138/am-2000-072510.2138/am-2000-0725 ↗
73. 10.1016/j.scriptamat.2008.03.04410.1016/j.scriptamat.2008.03.044 ↗
74. Zhao Z. · J. Univ. Sci. Technol. Beijing: Mineral Metall. Mater · 2000 · 7 · 197