Weld metal cracking in laser beam welded single crystal nickel base superalloys
Source abstract
Abstract
The weldability of two single crystal nickel base superalloys CMSX-4 and CMSX-486 were investigated by autogenous bead-on-plate laser beam welding. The analysis of microsegregation that occurred during solidification in the fusion zone indicated that while W and Re segregated into the γ dendrites, γ′ forming elements Ti, Ta, and Al as well as Hf were rejected into the interdendritic liquid. Fusion zone cracking was observed in both the materials and was observed to have initiated and propagated along the high angle stray grain boundaries in the weld metal of the two alloys. Increased formation of stray grains and increased extent of fusion zone cracking were, however, observed in the CMSX-486 alloy. Extension of solidification temperature range mainly by microsegregation of grain boundary strengthening elements B, Hf, and Zr in CMSX-486 was suggested to be responsible for the increased susceptibility of the alloy to stray grain formation and weld metal cracking compared to CMSX-4 superalloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Harris K. · Proc. Conf. ‘Superalloys’, Champion, PA, USA, September 2004, pp. · 45
2. Fullagar K. P. L. · Trans. ASME · 1996 · 118 · 380
3. Harris K. · Proc. Conf. ‘Superalloys’, Champion, PA, USA, September 2004, · 297
4. 10.1016/j.msea.2005.09.05810.1016/j.msea.2005.09.058 ↗
5. 10.1016/j.msea.2005.02.05610.1016/j.msea.2005.02.056 ↗
6. 10.4028/www.scientific.net/MSF.426-432.400710.4028/www.scientific.net/MSF.426-432.4007 ↗
7. Babu S. S. · J. Phys · 1996 · 6 · 253
8. 10.1524/zkri.1958.110.1-6.2110.1524/zkri.1958.110.1-6.21 ↗
9. 10.1016/0001-6160(83)90062-710.1016/0001-6160(83)90062-7 ↗
10. De A., Walsh C. A., Maiti S. K., and Bhadeshia H. K. D. H.: Sci. Technot Weld Join. 2003, 8, (6), 391.10.1179/136217103225005633 ↗
11. 10.1007/s11661-998-0320-x10.1007/s11661-998-0320-x ↗
12. Fleming M. C. ‘Solidification processing’, 58-66; 1974, New York, McGraw-Hill.
13. 10.1016/0921-5093(91)90252-I10.1016/0921-5093(91)90252-I ↗
14. 10.1007/BF0265030010.1007/BF02650300 ↗
15. Thompson R. G. · Trans. A · 1991 · 22 · 557
16. Hansen M., and Anderko K. ‘Constitution of binary alloys’: 1958, New York, McGraw-Hill.10.1149/1.2428700 ↗
17. Durand-Charre M. ‘The microstructure of superalloys’; 1997, Amsterdam, Gordon and Breach Science.
18. 10.1007/BF0054420310.1007/BF00544203 ↗
19. Chalmers B. A. ‘Principles of solidification’; 1964, New York, John Wiley.
20. Borland J. C. · Brit. Weld J · 1960 · 7 · 508
21. Cieslak M. J. · Weld. 1 · 1991 · 49s
22. Smith C. S.: Trans. AIMME, 1948, 175.10.1002/ncr.4110370314 ↗
23. Vitek J. M. · Proc. Conf. ‘Superalloys’, Champion, PA, USA, September 2004, · 459
24. 10.1063/1.160295010.1063/1.1602950 ↗
25. Gaumann M., Trivedi R., and Kurz W., Mater. Sci. Eng. A, 1997, A226-228, 763.10.1016/S0921-5093(97)80081-0 ↗
26. 10.1179/stw.1997.2.3.10910.1179/stw.1997.2.3.109 ↗
27. Kurz W., and Fisher D. J. ‘Fundmentals of solidification’, 240; 1984, Aedermannsdorf, Trans Tech.
28. 10.4028/www.scientific.net/MSF.426-432.412310.4028/www.scientific.net/MSF.426-432.4123 ↗
29. Vitek J. M., Babu S. S., David S. A., Park J. W., Hu Y., and Hehmann W.: in Proc. 7th Int. Conf. on ‘Trends in welding research’, Pine Mountain, Gerogia, USA, May 2005, Callaway Gardens Resort,459–465.10.7449/2004/Superalloys_2004_459_465 ↗
30. 10.1007/BF0291384410.1007/BF02913844 ↗
31. 10.1016/j.scriptamat.2005.05.01210.1016/j.scriptamat.2005.05.012 ↗