journal article·2015-02

Comparison of thermomechanical stresses produced in work rolls during hot and cold rolling of Cartridge Brass 1101

F. Qayyum, M. Shah, S. Manzoor, M. Abbas

Materials Science and Technology· Volume 31· Issue 3
Publisher page

Abstract

Thermomechanical stresses play an important role in defining the life of the work roll used in hot rolling process. In this research temperature dependent mechanical properties of cartridge brass are determined experimentally using high temperature compression tests at different temperatures and strain rates. Real life measurements are made from a brass rolling mill as input data for the simulation boundary conditions. Hot rolls are made of AISI H11 hot work tool steel. Temperature dependent mechanical properties of AISI H11 steel are used. Thermal and mechanical stresses produced in the work rolls during hot rolling process are predicted using a thermoplastic finite element approach in the ABAQUS Standard software. Hot rolling is compared with cold rolling to determine the effects produced on the work rolls. A criterion is introduced to compare the severity of stresses produced on the rolling surfaces in case of hot rolling and cold rolling based on the yield stress of the roller material for different temperatures. A method for separating thermal and mechanical stresses in the simulation is also described.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metallurgy and Material Science · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department University of Engineering and Technology, Taxila, Pakistan

References (21)

Show source-provided references
1. 10.1016/0924-0136(93)01286-V10.1016/0924-0136(93)01286-V ↗
2. 10.1007/s11661-998-0117-y10.1007/s11661-998-0117-y ↗
3. 10.1016/S0924-0136(99)00242-310.1016/S0924-0136(99)00242-3 ↗
4. 10.1016/S0924-0136(99)00083-710.1016/S0924-0136(99)00083-7 ↗
5. 10.1016/S0924-0136(99)00175-210.1016/S0924-0136(99)00175-2 ↗
6. 10.1016/S0924-0136(02)00310-210.1016/S0924-0136(02)00310-2 ↗
7. 10.1016/j.jmatprotec.2004.04.10310.1016/j.jmatprotec.2004.04.103 ↗
8. 10.1016/j.triboint.2004.09.00210.1016/j.triboint.2004.09.002 ↗
9. 10.1007/s12289-008-0070-810.1007/s12289-008-0070-8 ↗
10. 10.1007/s11663-012-9714-710.1007/s11663-012-9714-7 ↗
11. Carslaw H: Clarendon, Oxford, 1959.
12. 10.1088/0965-0393/10/2/30610.1088/0965-0393/10/2/306 ↗
13. Bell RK: ‘Methods for the chemical analysis of NBS copper-base spectrochemical standards’; 1965, For sale by the Superintendent of Documents, US Govt. Print. Off.
14. ‘Properties and selection of metals’, in ‘Metals handbook’, Vol. 1, 1206; 1961, Metals Park, OH, American Society for Metals.
15. ‘Standard test method of compression testing of metallic materials at room temperature’, Annual Book of ASTM Standards, 2000, A. E9, –89a (Reapproved 2000), ASTM International, PA.
16. Harvey PD: ‘Engineering properties of steel’; 1982, Metals Park, OH, American Society for Metals.
17. Davis J: 1996, ASM Specialty Handbook-Carbon and Alloy Steels. Metals Park, OH, ASM International.
18. West EG: ‘Copper and its alloys’; 1982, New York, Ellis Horwood.
19. Dünckelmeyer M · Steel Res. Int. · 2010 · 81 · 86
20. 10.1016/S0924-0136(98)00449-X10.1016/S0924-0136(98)00449-X ↗
21. 10.1016/S0924-0136(97)02895-110.1016/S0924-0136(97)02895-1 ↗