The static, dynamic and metadynamic recrystallisation of a medium carbon steel
Source abstract
Abstract
Grain refinement during and after hot isothermal deformation of a medium carbon steel has been investigated. The average austenite grain size decreased with an increase in strain for the hot deformed and recrystallised material, with refinement extending beyond the strain for the peak stress. A window of strain that corresponds to transition from classical static to metadynamic recrystallisation was observed in respect to the recrystallised material. Within this post-dynamic transition window the strain at which strain independent softening occurs was different for different volume fractions of the recrystallised material. This led to a new terminology corresponding to initiation of strain independent softening. For the alloy of this study, strain independent softening for the start of post-deformation recrystallisation occurred near the strain to the peak stress. The strain corresponding to complete metadynamic recrystallisation, which was defined as when all levels of recrystallisation were strain independent, was much greater than the strain for the peak stress.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering and Technology Deakin University, Geelong, Vic. 3217 Australia
References (21)
Show source-provided references
1. SELLARS C. M.:J. J. Jonas Symp. on ‘Thermomechanical processing of steel’ (ed. S. Yue and E. Es-sadiqi) 3; 2000 Montreal CIM.
2. 10.1179/mtlr.1969.14.1.110.1179/mtlr.1969.14.1.1 ↗
3. JONAS J. J.: Mater. ScL Eng. A 1994 A184 155.10.1016/0921-5093(94)91028-6 ↗
4. 10.1023/A:101799512242010.1023/A:1017995122420 ↗
5. 10.1179/mst.1995.11.6.54810.1179/mst.1995.11.6.548 ↗
6. HODGSON P. D.: Thermec'97. Int. Conf. on ‘Thermomechanical processing of steels and other materials’ Wollongong Australia July 1997 (ed. Chandra T. and Sakai T.) 1.1 121; 1997 Warrendale PA TMS.
7. 10.1007/BF0264798410.1007/BF02647984 ↗
8. SELLARS C. M. and WHITEMAN J. A.: Metal Scl. 1979 13 187.10.1179/msc.1979.13.3-4.187 ↗
9. POLIAK E. I. and JONAS J. J.: ISIJ mt. 2003 43 684.10.2355/isijinternational.43.684 ↗
10. ROUCOULES C. PIETRZYK M. and HODGSON P. D.: Mater. Sci. Eng. A 2003 A339 1.10.1016/S0921-5093(02)00120-X ↗
11. FIELDS D. S., and BACKOFEN W. A.: Proc. ASTM, 1957, 57, 1259.
12. 10.1179/cmq.1994.33.2.14510.1179/cmq.1994.33.2.145 ↗
13. 10.1179/02670830010150765910.1179/026708300101507659 ↗
14. ZAREI-HANZAKI A. PANDI R. HODGSON P. D. and YUE S.: Proc. Int. Symp. on ‘Phase transformations during the thermal/ mechanical processing of steel’ (ed. Hawbolt E. B. and Yue S.) 233; 1995 Montreal PQ CIM.
15. 10.1016/0001-6160(81)90112-710.1016/0001-6160(81)90112-7 ↗
16. SELLARS C. M.: in ‘Hot working and forming processes’ (ed. Sellars C. M. and Davies G. J.) 3; 1980 London The Metals Society.
17. 10.1016/0001-6160(88)90246-510.1016/0001-6160(88)90246-5 ↗
18. SAKAI T. and MIURA H.: in Proc. Conf. ‘Hot workability of steels and light alloys—composites’ (ed. H. J. McQueen E. V. Konopleva and N. D. Ryan); 1996 Montreal The Metallurgi-cal Society of CIM.
19. POLIAK E. I. and JONAS J. J.: ISIJ mt. 2003 43 692.10.2355/isijinternational.43.692 ↗
20. HODGSON P. D. and GIBBS R. K.: ISIJ mt. 1992 32 1329.10.2355/isijinternational.32.1329 ↗
21. ROBERTS W. SANDBERG A. and SIWECKI T.: in Conf. Proc. I-ISLA steels technology and applications’ 67; 1984 Metals Park OH ASM.