journal article·2008-07

Acicular ferrite development in autogenous laser welds using cerium sulphide particle dispersed steels

G. Thewlis, W. T. Chao, P. L. Harrison, A. J. Rose

Materials Science and Technology· Volume 24· Issue 7
Publisher page

Abstract

Acicular ferrite development has been investigated in autogenous laser welds using cerium sulphide particle dispersed steels. Around 80% acicular ferrite has been obtained in weld metal irrespective of [Al]/[O] ratio. Acicular ferrite is high when combined sulphur and oxygen levels are between 200 and 550 ppm, but is markedly reduced below 200 ppm. Large acicular ferrite variations cannot be explained by changes in particle number density and austenite grain size, but may be attributed to changes in particle type. Phases promoting high acicular ferrite are (Ce,La) 2 O 2 S, Ce 4 O 4 S 3 , MnS and TiN, with some Al 2 O 3 , CeAlO 3 and rare earth sulphides. Reduced acicular ferrite results from an absence of TiN or MnS. It is argued that phases may radically influence acicular ferrite content by altering the thermodynamic driving force for intragranular transformation and varying nucleation and growth kinetics through epitaxial relationships. Where aluminium is the primary deoxidising agent, loss of acicular ferrite at [Al]/[O] ratios greater than unity may potentially be explained by unfavourable Al 2 O 3 clustering and formation of eutectic type II MnS colonies. When cerium is the primary deoxidising and desulphurising agent, this is not observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Klaestrup Kristensen J.: Proc. JOM-10, Int. Conf. on ‘Joining of materials’, Helsigor, Denmark, May 2001, JOM Institute, 117–129.
2. Kocak M. Kim Y.-J. Cam G. Dos Santos J. Riekehr S. Totster F. Instran A. Cardinal N. Webster S. E. Klaestrup Kristensen J. and Borgreen K.: Proc. Eur. Symp. on ‘Assessment of power beam welds’ Geesthacht Germany February 1999 GKSS-Forschungszentrum.
3. Kaplan D. Harrison P. L. Fersini M. Matera S. Weldingh J. and Klaestrup Kristensen J.: ‘Efficient welding with advanced steels and high power energy beams’ European Commission Report EUR 20507 Office for Official Publications of the European Communities 2002.
4. Harrison P. L. Andrich M. Langenberg P. Fersini M. Sorrentino S. and Wegmann H.: ‘Fracture Avoidance in Laser-Welded Thick Structural Steel Plates with Yield Strength Between 235 and 890MPa’ European Commission Report EUR 20951 Office for Official Publications of the European Communities 2004 ISBN 92-894-7737-7.
5. Laser Welding in Ship Construction — Classification Society Unified Guidelines for the Approval of CO 2-Laser Welding 1996.
6. Hall B. E. and Wallach E. R.: Proc. Int. Conf. on ‘Advances in joining and cutting processes’ Abington Cambridge UK 1989 The Welding Institute Paper 21.
7. Denny P. E. and Metzbower E. A.: Proc. Int. Conf. on ‘Advances in joining and cutting processes’ Abington Cambridge UK 1989 The Welding Institute Paper 25.
8. Cochrane R. C. Senogles D. J. and Lloyd L. J.: ‘Product development for power beam welding’ ECSC Agreement 7210.MC/802 (F5.4/91) Corus Swinden Technology Centre Rotherham UK November 1994.
9. Harrison P. L., and Webster S. E.: Proc. NPC 30, Dusseldorf, Germany, May 2005, CBMM/NPC, 61–80.
10. Koseki T., and Thewlis G.: Mater, Sci. Techol., 2005, 21, (8), 867–879.
11. Abson D. J., and Pargeter R. J.: Int. Met. Rev., 1986, 31, (4), 141–194.
12. 10.1179/13621710010153843410.1179/136217100101538434 ↗
13. Ohara M., and Homma H.: Proc. Int. Conf. on ‘Applications of electron and laser beam welding’, Hartford, USA, September 1987, AWS, 75–85.
14. Ohara M. Yurioka N. and Inoue T.: ‘A summary of micro-structures and toughness of electron beam welds in HSLA steels’ July 1992 IIW Document IX-1674-92.
15. Cochrane R. C., and Senogles D. J.: Proc. Int. Conf. on ‘Titanium technology in microalloyed steels’, Sheffield, UK, December 1994, The Institute of Materials, 207–233.
16. 10.1179/imr.1986.31.1.2710.1179/imr.1986.31.1.27 ↗
17. 10.1179/mst.1994.10.2.11010.1179/mst.1994.10.2.110 ↗
18. 10.1179/026708306X8143210.1179/026708306X81432 ↗
19. 10.1179/02670830422501032510.1179/026708304225010325 ↗
20. Weinberg F.: ‘Tools and techniques in physical metallurgy’ Chapter 4 1; 1970 New York Marcel Dekker Inc.
21. International Centre for Diffraction Data (ICDD) 12 Campus Blvd. Newtown Square PA 19073-3273 USA.
22. 10.1179/mst.1997.13.3.25710.1179/mst.1997.13.3.257 ↗
23. Evans G. M.: Met. Const. 1986 18 (9) 631R-636R10.1007/978-1-349-08750-1_3 ↗
24. Cochrane R. C. and Kirkwood P. R.: Proc. Int. Conf. on ‘Trends in steels and consumables for welding’ Abington Cambridge UK 1978 The Welding Institute Paper no. 35.
25. Ito Y., , Nakanishi M., and Komizo Y.: Met. Const., 1982, 14, (9), 472–478.
26. 10.1007/BF0054238410.1007/BF00542384 ↗
27. Fleck N. A. Grong O. Edwards G. R. and Matlock D. K.: Am. Weld J. May 1986 113s-121s.
28. Liu S. and Olsen D. L.: Weld. J. Res. Supp. 1986 65 (6) 139s-149s.
29. Barritte G. S., and Edmonds D. V.: Proc. Int. Conf. on ‘Advances in the physical metallurgy and applications of steel’, Liverpool, UK, September 1981, The Metals Society, 126–135.
30. Thewlis G.: Join. Mater., 1989, 2, (3), 125–129.
31. Hellman P., and Hillert M.: Scand J. Met., 1975, 4, (5), 211.
32. Fullman R. L.: Trans. AIME, 1953, 197, 447–452.
33. Bhadeshia H. K. D. H, , Svenson L. E., and Gretoft B.: J. Mater. Sci., 1986, 21, 3947-3951.
34. 10.1007/BF0264279910.1007/BF02642799 ↗
35. Thewlis G.: Proc. Int. Conf. on ‘Welding and performance of pippelines’ Abington Cambridge UK 1986 The Welding Institute Paper no. 9.
36. 10.1179/mst.1987.3.12.105110.1179/mst.1987.3.12.1051 ↗
37. 10.1007/BF0266390310.1007/BF02663903 ↗
38. Strangwood M., and Bhadeshia H. K. D. H.: Proc. Int. Conf. on ‘Advances in welding science and technology’, Gatlinberg, TN, USA, 1986, ASM International, 209–213.
39. 10.1179/mst.1989.5.1.9310.1179/mst.1989.5.1.93 ↗
40. 10.1007/BF0267028810.1007/BF02670288 ↗
41. 10.2355/isijinternational.36.140610.2355/isijinternational.36.1406 ↗
42. Takamura J. and Mizoguchi S.: Proc. 6th Iron Steel Cong. 591-597; 1990 Tokyo ISIJ.
43. 10.1093/jmicro/51.6.35910.1093/jmicro/51.6.359 ↗
44. van der Eijk C. Lassila I. Grong O. Svein Kleven O. and Holappa L.: Proc. Int. Conf. on ‘Materials science and technology’ September 2004 New Orleans LA USA AIST/TMS 199–206.
45. Harrison P. L.: Corus RD&T Report Ref. Source 132092 September 2006 Corus RD&T Rotherham UK.
46. Thewlis G.: Join. Mater., 1989, 2, (1), 25–31.
47. 10.1179/mst.1996.12.3.23710.1179/mst.1996.12.3.237 ↗
48. 10.2355/isijinternational1966.21.49510.2355/isijinternational1966.21.495 ↗
49. 10.2355/isijinternational1966.23.50410.2355/isijinternational1966.23.504 ↗
50. Eldridge M. F.: ‘Transformation behaviour of low aluminium ferritic steel’, PhD Thesis, University of Leeds, UK, 2000.
51. Sims C. E., and Dahle F. B.: Trans. Am. Found. Ass., 1938, 46, 65–104.
52. Crafts W., and Hilty D. C.: AIME Proc. Elec. Furn. Steel Conf., 1953, 11, 121–145.
53. Sims C. E., , Sallers H. A., and Boulger F. W.: Trans. Am. Found. Ass., 1949, 185, 233–247.
54. Dahl W., H. Hengstenberg and C Duren: Stahl und Eisen, 1966, 86, 782–795.
55. Wakoh M., , Sawai T., and Mizoguchi S: ISIJ Int. 1996, No 8, 1014–1021.
56. Grange R. A Shortsleeve F. J. Hilty D. C. Binder W. O. Motock G. T. and Offenhauer C. M.: ‘Boron calcium columbium and zirconium in iron and steel’; 1957 New York Wily and Sons.
57. 10.1179/imr.1978.23.1.7410.1179/imr.1978.23.1.74 ↗