journal article·2014-07

Reducing hot cracking tendency of dissimilar weld overlay by magnetic arc oscillation

X. Yu, Y. C. Lim, R. Smith, S. S. Babu, D. F. Farson, J. C. Lippold, S. McCracken

Materials Science and Technology· Volume 30· Issue 8
Publisher page

Abstract

Nickel filler metals are used for joining and repair of dissimilar metal welds in nuclear power plants. However, with some compositions of austenitic stainless steel base metals, weld cracking is observed. In the present work, the solidification cracking behaviour of 52M overlay on stainless steel with and without magnetic stirring was studied. Single, double and triple bead on plate experiments with 52M filler wire were performed on a type 303 stainless steel plate cladding with a single layer of ER308LSi stainless steel. Weldings were then performed with and without magnetic stirring. Although cracking tendency was observed in all experiments, it was seen that magnetic stirring significantly reduced the cracking tendency. Confirmatory electron backscattered diffraction analyses confirmed the grain refinement in 52M beads with magnetic stirring.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Ohio State University, 1248 Arthur E. Adams Dr., Columbus, OH 43210, USA

Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA

Electric Power Research Institute, Welding and Repair Technology Center, 1300 West WT Harris Blvd, Charlotte, NC 28262, USA

References (39)

Show source-provided references
1. 10.1007/s11661-005-0201-510.1007/s11661-005-0201-5 ↗
2. ‘Materials reliability program crack growth rates for evaluating primary water stress corrosion cracking (PWSCC) of alloy 82, 182, and 132 melds (MRP-JJ5NP)’, No. 1006696, EPRI, Palo Alto, CA, USA 2004.
3. 10.1179/imr.1991.36.1.1610.1179/imr.1991.36.1.16 ↗
4. Nissley NE and Lippold JC: ‘Ductility-dip cracking susceptibility of filler metal 52 and 52M Ni-base filler metals’, Proc. 7th Conf. on ‘Trends in welding research’, (ed. David S A et al.) , 327–332; 2005, Pine Mountain, GA, May, ASM International.
5. 10.1002/978047050026210.1002/9780470500262 ↗
6. Capobianco TE and Hanson ME: ‘Auger spectroscopy results from ductility dip cracks opened under ultra high vacuum’, LM-05K074, DOE report, Lockheed Martin, New York, USA, 2005.
7. Young GA, Battige CK, Lewis N, Penik MA and Kikel J: ‘Factors affecting the hydrogen embrittlement resistance of Ni–Cr–Mn–Bv welds’, Proc. 6th Conf. on ‘Trends in welding research’, (ed. David S A et al.), 666–671; 2002, Phoenix, AZ, ASM International.
8. 10.1007/BF0332128810.1007/BF03321288 ↗
9. Torres EA, Peternella FG, Ramirez AJ and Caram R: ‘In-situ high temperature straining tests to study welding solid-state cracking phenomena’, Proc. 8th Conf. on ‘Trends in welding research’, (ed. David S A et al.), 354–357; 2008, Pine Mountain, GA, ASM International.
10. Kiser SD, Zhang R and Baker BA: ‘New welding material for improved resistance to ductility dip cracking’, Proc. 8th Conf. on ‘Trends in welding research’, (ed. David S A), 639–644; 2008, Pine Mountain, GA, ASM International.
11. 10.1080/0950083090327718010.1080/09500830903277180 ↗
12. Noecker FF · Weld. J. · 2009 · 88 · 7s
13. Noecker FF · Weld. J. · 2009 · 88 · 62s
14. Nishimoto K, Saida K, Sakamoto M and Kono W: ‘Effect of filler meal La additions on micro-cracking in multi-pass laser overlay weld metal of alloy 690’, Proc. of ‘Hot cracking phenomena in welds II’, Springer Berlin, Berlin, Germany, March 2007, 389–408.10.1007/978-3-540-78628-3_20 ↗
15. Lippold JC and Nissley NE: ‘Ductility-dip cracking in high chromium Ni-base filler metals’, Proc. of ‘Hot cracking phenomena in welds II’, Springer Berlin, Berlin, Germany, March 2007, 409–425.10.1007/978-3-540-78628-3_21 ↗
16. 10.1179/174329307X22728310.1179/174329307X227283 ↗
17. 10.1179/174329306X9429110.1179/174329306X94291 ↗
18. 10.1179/174329306X9430910.1179/174329306X94309 ↗
19. 10.1179/174329306X9431810.1179/174329306X94318 ↗
20. 10.1016/j.msea.2004.03.07410.1016/j.msea.2004.03.074 ↗
21. Yang Y, Babu SS, Vaze S, Kikel J and Dewees D: ‘Crack mitigation in buttering and cladding processes for a nuclear application’, Proc. 8th Conf. on ‘Trends in welding research’, (ed. David S A et al.), 194–200; 2008, Pine Mountain, GA, ASM International.
22. Simpson RP · Weld. J. · 1977 · 56 · S67
23. 10.1016/S0921-5093(98)01010-710.1016/S0921-5093(98)01010-7 ↗
24. 10.1179/13621719910153769910.1179/136217199101537699 ↗
25. Arakawa T, Hirano K, Ishida A, Kokawa H and Sato YS: ‘Effects of magnetic stirring and grain structure on ultrasonic characteristics in Inconel overlay-welds’, Proc. 5th Int. Conf. on ‘Trends in welding research’, (ed. Vitek J M et al.), 67; 1998, Stone Mountain, GA, ASM International.
26. 10.1179/13621710322500546210.1179/136217103225005462 ↗
27. 10.1007/BF0265431710.1007/BF02654317 ↗
28. Koteswara Rao · Mater. Sci. Eng. A · 2005 · 404 · 227
29. 10.1179/136217110X1272026400827710.1179/136217110X12720264008277 ↗
30. 10.1179/136217110X1272026400823110.1179/136217110X12720264008231 ↗
31. 10.1016/j.msea.2007.02.08010.1016/j.msea.2007.02.080 ↗
32. 10.1179/13621719910153803010.1179/136217199101538030 ↗
33. 10.1081/AMP-12002993610.1081/AMP-120029936 ↗
34. Yu X, Lim YC, Farson D, Babu SS, Lippold JC and McCracken S: ‘Effect of magnetic stirring on nickel alloy weld microstructure and micro-fissure response’, Proc. 2nd Int. Conf. on ‘Welding and fabrication technology for new power plants and components’, Electric Power Research Institute, Champion Gate, FL, USA, June 2011.
35. Yu X, Smith R, Lim YC, Babu SS, Farson DF, Lippold JC and McCracken S: ‘Effect of magnetic stirring on nickel alloy weld microstructure and micro-fissure response’, Proc. 9th Conf. on ‘Trends in welding research’, ASM International, Chicago, IL, USA, June 2012.
36. 10.1179/13621710422502184110.1179/136217104225021841 ↗
37. 10.1179/174328408X36145410.1179/174328408X361454 ↗
38. 10.1016/j.jnucmat.2010.03.02210.1016/j.jnucmat.2010.03.022 ↗
39. Kou S: ‘Welding metallurgy’, 2nd edn; 2003, Hoboken, NJ, Wiley-Interscience.