journal article·2014-07Open access

Austenite stability for quenching and partitioning treated steel revealed by colour tint-etching method

H. S. Zhao, X. Zhu, W. Li, X. J. Jin, L. Wang, H. Jiao, D. M. Jiang

Materials Science and Technology· Volume 30· Issue 9

Abstract

The complex microstructures of quenching and partitioning treated (QP980) steel have been investigated using two-step colour tint-etching method and further verified by X-ray diffraction, electron backscattering diffraction, magnetisation measurements and Mössbauer spectroscopy. The colour tint-etching method can quantitatively discriminate the ferrite, martensite and retained austenite by obviously colour differences. It is found that retained austenite was observed inside both martensite and ferrite, and the fraction of retained austenite in martensite was statistically higher but more scattering than that in ferrite. Moreover, the retained austenite in martensite is a little bit more stable than that in ferrite by comparing the change of volume fraction retained austenite in both phases after tension.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Lab of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Institute of Advanced Steels and Materials, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

State Key Lab of Development and Application Technology of Automotive Steels, Baosteel Research Institute, Shanghai 201900, China

Oxford Instruments, Shanghai 201102, China

Department of Physics, East China Normal University, Shanghai 200241, China

References (21)

Show source-provided references
1. 10.1007/s11661-008-9609-z10.1007/s11661-008-9609-z ↗
2. 10.1007/s11661-008-9599-x10.1007/s11661-008-9599-x ↗
3. 10.1016/j.actamat.2012.12.01010.1016/j.actamat.2012.12.010 ↗
4. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
5. Matlock DK and Speer JG: ‘Third generation of AHSS: microstructure design concepts’, in ‘Microstructure and texture in steels’, (ed. Haldar S S A and Bhattacharjee D), 185–205; 2009, London, Springer.10.1007/978-1-84882-454-6_11 ↗
6. 10.1016/j.actamat.2004.02.04410.1016/j.actamat.2004.02.044 ↗
7. 10.1007/s11661-001-0240-510.1007/s11661-001-0240-5 ↗
8. 10.1007/s11661-006-0213-910.1007/s11661-006-0213-9 ↗
9. 10.1007/s11661-006-0157-010.1007/s11661-006-0157-0 ↗
10. 10.1016/j.matchar.2008.04.00410.1016/j.matchar.2008.04.004 ↗
11. 10.1179/174328408X35372310.1179/174328408X353723 ↗
12. 10.1016/S1044-5803(97)00154-X10.1016/S1044-5803(97)00154-X ↗
13. ‘Standard test methods for tension testing of metallic materials’, E 8M-04, ASTM, West Conshohocken, PA, USA, 2004.
14. De AK · Adv. Mater. Processes · 2003 · 161 · 27
15. ‘Standard practice for X-ray determination of retained austenite in steel with near random crystallographic orientation’, E 975–13, ASTM, West Conshohocken, PA, USA, 2003.
16. 10.1016/j.scriptamat.2006.11.03310.1016/j.scriptamat.2006.11.033 ↗
17. Lee SJ · Metall. Mater. Trans. A · 2012 · 1
18. 10.1016/j.ijhydene.2013.05.11310.1016/j.ijhydene.2013.05.113 ↗
19. 10.1016/S0921-5093(01)00965-010.1016/S0921-5093(01)00965-0 ↗
20. 10.1016/0025-5416(86)90361-710.1016/0025-5416(86)90361-7 ↗
21. 10.1016/j.scriptamat.2012.01.01710.1016/j.scriptamat.2012.01.017 ↗