Effects of shot peening on short crack growth rate and resulting low cycle fatigue behaviour in low pressure turbine blade material
Source abstract
Abstract
The effect of shot peening on subsequent low cycle fatigue behaviour of a representative low pressure steam turbine blade material has been investigated in bend test samples. An analysis of the short fatigue crack growth behaviour has been conducted. For samples with no stress concentration feature, shot peening was found to have a more evident beneficial effect at lower strain levels than at higher strain levels, whereas for samples with a stress concentration feature, the beneficial effect was retained even at higher strain levels. Preexisting cracks were observed on the shot peened surface, which started to grow at 10–25 of fatigue life in the low cycle fatigue regime. The crack propagation rate was slower than that observed in the ground sample, suggesting that the shot peening process delayed crack propagation. This improvement in fatigue life has been attributed to the significant slowing of small cracks while growing through surface regions of significant compressive residual stresses and local workhardening developed by the shot peening process. Once cracks in the notch root have penetrated this region in the depth direction, faster crack growth rates, similar to those observed in the ground case, were seen.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Research Group Engineering and the Environment, University of Southampton, Highfield, Southampton SO17 1BJ, UK
E.ON New Build and Technology Ltd Ratcliffe on Soar, Nottingham NG11 0EE, UK
References (29)
Show source-provided references
1. 10.1179/1743284713Y.000000022210.1179/1743284713Y.0000000222 ↗
2. 10.1179/1743284713Y.000000022310.1179/1743284713Y.0000000223 ↗
3. ESDU: ‘The effect of surface roughness on the fatigue limit of steels at zero mean stress’, ESDU 74027, ESDU International PLC, London, UK, 1974.
4. 10.1111/j.1460-2695.1992.tb01262.x10.1111/j.1460-2695.1992.tb01262.x ↗
5. 10.1111/j.1460-2695.1987.tb00205.x10.1111/j.1460-2695.1987.tb00205.x ↗
6. Koster W: ‘Effect of residual stress on fatigue of structural alloys’, Proc. 3rd Int. Conf. on ‘Practical application of residual stress technology’, Indianapolis, IN, USA, May 1991, ASM, 1–9.
7. 10.1016/0142-1123(95)00044-T10.1016/0142-1123(95)00044-T ↗
8. 10.1016/j.actamat.2011.03.01310.1016/j.actamat.2011.03.013 ↗
9. 10.1016/S0921-5093(98)01121-610.1016/S0921-5093(98)01121-6 ↗
10. Wagner L: ‘Effect of mechanical surface treatments on fatigue performance of titanium alloys’, (ed. R. R. Boyer, D. Eylon and F. Lutjering), in ‘Fatigue behaviour of titanium alloys’, 253–265; 1999, Warrendale, PA, TMS.
11. 10.1016/S0142-1123(01)00133-510.1016/S0142-1123(01)00133-5 ↗
12. 10.1016/j.engfailanal.2006.02.01110.1016/j.engfailanal.2006.02.011 ↗
13. 10.1016/S0013-7944(03)00017-110.1016/S0013-7944(03)00017-1 ↗
14. 10.1016/S0924-0136(01)00601-X10.1016/S0924-0136(01)00601-X ↗
15. 10.1179/imtr.1984.29.1.44510.1179/imtr.1984.29.1.445 ↗
16. 10.1111/j.1460-2695.1979.tb01349.x10.1111/j.1460-2695.1979.tb01349.x ↗
17. 10.1016/j.ijfatigue.2008.01.00110.1016/j.ijfatigue.2008.01.001 ↗
18. 10.1111/j.1460-2695.2007.01102.x10.1111/j.1460-2695.2007.01102.x ↗
19. 10.1016/S0921-5093(98)00522-X10.1016/S0921-5093(98)00522-X ↗
20. 10.1111/j.1460-2695.1996.tb00957.x10.1111/j.1460-2695.1996.tb00957.x ↗
21. 10.1016/S0142-1123(01)00132-310.1016/S0142-1123(01)00132-3 ↗
22. 10.1007/s11661-005-0076-510.1007/s11661-005-0076-5 ↗
23. 10.1016/j.ijfatigue.2003.12.00310.1016/j.ijfatigue.2003.12.003 ↗
24. 10.1016/j.ijfatigue.2008.11.01710.1016/j.ijfatigue.2008.11.017 ↗
25. Bergstrom J, Ericsson T: ‘Relaxation of shot peening induced compressive stress during fatigue of notched steel samples’, Proc. ICSP-2, Chicago, IL, USA, May, 1984, 241–248, American Shot Peening Society.
26. 10.1016/j.msea.2011.08.00310.1016/j.msea.2011.08.003 ↗
27. 10.2355/isijinternational.32.17510.2355/isijinternational.32.175 ↗
28. 10.1016/j.actamat.2011.04.02510.1016/j.actamat.2011.04.025 ↗
29. Morris A, Soady KA, Brett C: Personal communication, E.ON, 2012.