Microstructure and dynamic material performance of high strength and ultra high strength strip steels
Source abstract
Abstract
The combined need for weight reduction and increased safety in modern vehicles has led automobile manufacturers to utilise the unique properties of high strength steels in their vehicles. Standard quasi-static tensile tests allow the static mechanical properties to be evaluated for any given steel grade. However, automobile designers require more advanced data, including high strain rate tensile data to fully understand the performance of a steel grade during deformation. Knowledge of the role of strain rate on a given strip steel grades deformation characteristics is essential to fully predict the behaviour of the steel during a crash event to help ensure the safety of the vehicle passengers. In the present study, three commercial strip steel grades were subjected to room temperature deformation at variable strain rates, ranging from quasi-static to dynamic loading conditions, where their obtained mechanical properties were measured. The steel grades studied were a HSLA grade (XF450), a carbon manganese grade (CMn800) and an advanced high strength steel grade (DP1400), each with very different microstructures. The present study showed that the XF450 with a ferrite (97%)-pearlite microstructure exhibited superior elongation and was the most strain rate sensitive grade. This was the only grade where energy absorption until 10% elongation could be measured. The DP1400 with a mainly martensitic microstructure showed very little change in strength or ductility properties over the tested strain rates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Vuoristo T., Kuokkala V.T., Apostol M., Peura P., Tulonen J., and Pirttijoki P.: Proc. Conf. MS&T 2004, New Orleans, LA, USA, September 2004, TMS/ASM,471–480.
2. Engl B., KeBler L., Lance F.J., and Schaumann T. W.: Proc. Int. Body Engineering Conf. Expo. on ‘Automotive body materials: new material development’, Detroit, MI, USA, September 1998, Society of Automotive Engineers,
3. Miura K., Tagaki S., Hira T., Furukimi O., and Tanimura S. ‘High strain rate deformation of high strength sheet steels for automotive parts’, SAE paper 980952, Society of Automotive Engineers, Inc., Warrendale, PA, USA, 1998.10.4271/980952 ↗
4. Nakanishi E., Tateno H., Hishida Y., and Shibata K.: Proc. Int. Cong. Expo. on ‘New steel sheet products & processing for automotive applications’, Detroit, MI, USA, February 1998, Society of Automotive Engineers.
5. Ojima Y., Shiroi Y., Taniguchi Y., and Kato K.: Proc. Int. Cong. Expo. on ‘New steel sheet products & processing for automotive applications’, Detroit, MI, USA, February 1998, Society of Automotive Engineers.
6. 10.1179/174328405X4103810.1179/174328405X41038 ↗
7. Larour P., Verleysen P., Vermeulen M., Gomes M. A. R., Wedemeier A., Geoffroy J.L., and Bleck W.: Proc. Conf. MS&T 2004, New Orleans, LA, USA, September 2004, TMS/ASM,171–183.
8. Priest A. H., Horsley J., and Wilkinson G. ‘Technical note British Steel Ltd’, Revised edn; 2001, Rotherham, Swinden Technology Centre.
9. Porsche Engineering Services, Inc., ULSAB-AVC, Engineering report,October 2001
10. Stark-Seuken D. · Materialprüfung · 1995 · 37 · 165
11. Beynon N. D., Jones T. B., and Fourlaris G.: Proc. Conf. MS&T 2004, New Orleans, LA, USA, September 2004, TMS/ASM,459–469.
12. Qu J., Dabboussi W., Nemes J., and Yue S.: Proc. Conf. MS&T 2004, New Orleans, LA, USA, September 2004, TMS/ASM,153–161.
13. 10.1016/S0734-743X(99)00050-010.1016/S0734-743X(99)00050-0 ↗
14. 10.1002/srin.20000570910.1002/srin.200005709 ↗
15. Jones T. B. · 2001
16. Bleck W. · Mater. Forum · 2005 · 29 · 21
17. De A. K. · Adv. Mater. Process · 2003 · 27 · 0
18. Bramfitt B. L., and Benscoter A. O. ‘Metallographersguide: practices and procedures for irons and steels’, 224-226; 2002, Materials Park, OH, ASM International.10.31399/asm.tb.mgppis.9781627082587 ↗
19. Annual book of ASTM standards, Part 11, E 562, 1981.
20. Annual book of ASTM standards, Part 11, E 112, 1981.
21. ASTM designation E 975-95, ASTM International.
22. Jatczak F., Larson J. A., and Shin S. W. ‘Retained austenite and its measurement by X-ray diffraction’, SP-453C, Society of Automotive Engineers, Warrendale, PA, USA, 1980.10.4271/800426 ↗
23. ‘Method of test at ambient temperature’, British standard BS EN 10002-1:2001, Part 1.
24. Jones T. B.
25. J.- · Skand J. Metall · 1984 · 13 · 343
26. 10.1179/174328405X1623410.1179/174328405X16234 ↗