journal article·2005-07

Effect of electrical discharge machining process on crack susceptibility of nickel based heat resistant alloy

S. H. Kang, D. E. Kim

Materials Science and Technology· Volume 21· Issue 7
Publisher page

Abstract

The objective of this study was to investigate the effects of electrical discharge machining (EDM) process conditions on the crack susceptibility of a nickel-based superalloy. Because sequential processes are inevitable in the manufacturing industry, the effects of EDM and post-EDM processes on the crack propagation behaviour of the components need to be clearly understood. The altered material zone (AMZ) of EDM processed Hastelloy X revealed different morphology before and after solution heat treatment. Depending on the EDM dielectric fluid and the post-EDM process such as solution heat treatment, it was found that cracks existing in the recast layer could propagate into substrate when a 20% strain tensile force was applied at room temperature. In the case of the kerosene electrical discharge (ED) machined specimens, it was observed that carburisation and sharp crack propagation along the grain boundary occurred after the heat treatment. However, the deionised water ED machined specimens after heat treatment underwent oxidation and showed no crack propagation behaviour. A metallurgical evaluation of the microstructure of the AMZ was also conducted.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. 10.1111/j.1151-2916.1991.tb06928.x10.1111/j.1151-2916.1991.tb06928.x ↗
2. 10.1109/27.70088210.1109/27.700882 ↗
3. 10.1016/S0955-2219(00)00027-310.1016/S0955-2219(00)00027-3 ↗
4. Prevey P. S. · AFML-TR-70-11 · 1970
5. 10.1179/mst.1989.5.11.115310.1179/mst.1989.5.11.1153 ↗
6. 10.1016/S0924-0136(98)00082-X10.1016/S0924-0136(98)00082-X ↗
7. Kang S. H · KSME Int. J · 2003 · 17 · 147510.1007/BF02982327 ↗
8. 10.1016/0142-1123(88)90040-010.1016/0142-1123(88)90040-0 ↗
9. G. Y. Lai: in ‘High-temperature corrosion of engineering alloys’, 15–46; 1990, Materials Park, OH, ASM International.
10. 10.1179/02670830110151016810.1179/026708301101510168 ↗
11. 10.1016/S0924-0136(98)00314-810.1016/S0924-0136(98)00314-8 ↗