Effects of VIM frequency on chemical composition, homogeneity and microstructure of NiTi shape memory alloy
Source abstract
Abstract
The concentration distribution and microstructure of NiTi shape memory alloys produced in vacuum induction furnaces operating at high and medium frequencies are compared with those of materials melted in vacuum resistance furnaces. The production procedure consisted of charging pure metals into a graphite crucible; raising the temperature to 1450°C under vacuum; holding the materials in high and medium frequency induction and resistance furnaces for 3, 5, and 120 min under vacuum; and allowing alloys to solidify in the crucibles under the same vacuum. The procedures in each of the three furnaces were made as similar as possible. Chemical composition, microstructure, and surface hardness of alloys were determined at different locations along the length of solidified specimens. Standard deviations in chemical analyses and hardness numbers were taken as criteria for specimen homogeneity. Results indicate that a high vacuum induction furnace operating at medium frequency is an appropriate equipment for melting NiTi shape memory alloys of the desired homogeneity, microstructure, and hardness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering Sharif University of Technology, Azadi Avenue, Teheran, Iran.
References (33)
Show source-provided references
1. KUFMAN L.: ‘Shape memory effect in alloy’ 1975 New York Plenum Press.
2. SCHOTKY M. D.: Trans Mater. Res. Soc. Jpn. B, 1994, 18B, 1131–1141.
3. ABRAHAMSSON P., and BJAMEMO R.: Trans Mater. Res. Soc. Jpn. B, 1994, 18B, 1171–1174.
4. IGHARO M. and WOOD J. V.: Powder Metall. 1985 28 131–139.10.1179/pom.1985.28.3.131 ↗
5. HONMA T. M. NISHIDA and K. YAMAUCHE ‘Ti—Ni alloy articles having a property of reversible shape memory and a method of making the same’ Pat. 4707196 US Patent Office Washington DC November 1987.
6. GREEN S. M. GRANT D. M. and KELLY N. R.: Powder Metall. 1997 40 43–47.10.1179/pom.1997.40.1.43 ↗
7. 10.1016/S0966-9795(00)00024-810.1016/S0966-9795(00)00024-8 ↗
8. GOLDSTEIN D. and SCOTT A.: ‘Melting method for high-homogeneity precise-composition nickel— titanium alloys’ Pat. 4282033 US Patent Office Washington DC 1981.
9. SCOTT R.: ‘Gamma titanium aluminide production using the induc-tion skull melting process’ 475 — 482; 1995 Warrendale PA TMS.
10. BADAKHSHAN RAZ S.: ‘Influential parameters in production of Ni—Ti memory alloy via melting-casting method’ MSc thesis Sharif University of Technology Tehran Iran 2002 (In Persian).
11. ROZNER A. G. HEINTZELMAN E. F. BUEHLER W. J. and GILFRICH J. V.: ASM Trans. 1965 58 415–418.
12. 10.1080/1042691970893520610.1080/10426919708935206 ↗
13. 10.1080/1042691970893512410.1080/10426919708935124 ↗
14. DUERING T. W. and PELTON R. A.: ‘Ni—Ti shape memory alloy material properties handbook: titanium handbook’ 1994 Metals Park OH ASM International.
15. MIRABOLGHASEMI S. H. SELAHI A. HAERI E. and SADRNEZHAAD S. K.: ‘13th Iranian Foundrymen's Society confer-ence’ 237–244; 2001 Tehran Iran (In Persian).
16. 10.1016/1359-6462(95)00570-610.1016/1359-6462(95)00570-6 ↗
17. 10.1007/BF0259562410.1007/BF02595624 ↗
18. LIU X. P., , CM W., , ZHANG C. S., , HE X. Y., and ZHAO L. C.: Trans. Mater. Res. Soc. Jpn. B, 1994, 18B, 1121–1124.
19. MASSALSKE T. in ‘Binary alloy phase diagrams’ (ed. Murray J. L. et al) 2847; 1986 Metals Park OH ASM International.
20. FAVIER D., , tau Y., and MCCORMICK P. G.: Scr. Metall., 1993, 28, 669— 672.
21. 10.1007/BF0071345510.1007/BF00713455 ↗
22. ALLAFI J. K., , REN X., and EGGLER G.: Acta Mater, 2002, 50, 793— 803.
23. 10.1007/BF0266266210.1007/BF02662662 ↗
24. CHOUDHURY A.: ‘Vacuum metallurgy’ 1990 Materials Park OH ASM International.
25. FURUYA Y., , KIMUR H., , MATSUMOTO M., and MASUMOTO T.: Trans. Mater. Res. Soc. Jpn. B, 1994, 18B, 1033–1036.
26. ZINN S. and SEMIATIAN S. L.: ‘Elements of induction heating’ 3rd edn 1991 Palo Alto CA Electric Power Research Institute.
27. FELEMINGS M. C.: ‘Solidification processing’ 1974 New York McGraw-Hill.
28. DAVIS G. J.: ‘Solidification and casting’ 1973 London Applied Science.
29. STEFANESCU M.: ‘Casting metals handbook’ 9th edn Vol. 15 1988 Metals Park OH ASM International.
30. TUDBURY C. A.: ‘Basics of induction heating’ Vol. 1 1960 USA New York John F. Rider.
31. YAMAGUCHI T. and KAVASE Y.: 1st Int. Conf. on ‘Processing material for properties’; 1993 Warrendale PA TMS.
32. GEIGER G. H. and PORIER D. R.: ‘Transport phenomena in metallurgy’ 1973 Reading MA Addison Wesley.
33. ZSEKELY J. and THEMELIS N. J.: ‘Rate phenomena in process metallurgy’ 1971 New York Wiley.