Microstructure and mechanical properties of novel rail steels
Source abstract
Abstract
Four new rail steels, alloyed with Cu, Cr, Ni and Si, were designed to improve the corrosion resistance of conventional C–Mn rail steel. The mechanical behaviour of these four rail steels were tested and compared qualitatively with C–Mn, Cu–Mo and Cr–Mn rail steels. While the strengths of Cu–Mo, Cr–Mn, Cr–Cu–Ni and Cr–Cu–Ni–Si rail steels were comparable; the strengths of Cu–Ni and Cu–Si steels were relatively low. The ductility of Cu–Mo and Cu–Ni rail steels were higher compared to C–Mn and Cr–Mn rail steels. The optimum combination of strength and ductility was realised in the case of Cu–Mo rail steel, followed by Cr–Cu–Ni and Cr–Cu–Ni–Si rail steels. The tensile properties have been understood by considering microstructural (notably, lamellar spacing of pearlite) and fracture surface features. The effect of alloying elements on hardness and tensile properties has been explained based on their effect in shifting the continuous cooling transformation curves as well as austenite stability region, in addition to solid solution strengthening and strengthening by carbide formation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials and Metallurgical EngineeringIndian Institute of Technology, Kanpur 208016, India
References (32)
Show source-provided references
1. Heller W., and Schmedders H. in ‘Steel: a handbook for materials research and engineering, application’, (ed.Eisenhfittenleute V.), Vol. 2, 593-601; 1993, Berlin, Springer-Verlag.
2. Llewellyn D. T., and Hudd R. C. ‘Steels: metallurgy and applications’, 3rd edn, 274; 1998, Oxford, Butterworth-Heinemann.
3. Jain A. · India · 2007 · 2 · 239
4. ‘Indian railways standard specifications for flat bottom railway rails’, IRS T- 12, Government of India, Ministry of Railways, India, 1996.
5. 10.1016/S0010-938X(71)80072-010.1016/S0010-938X(71)80072-0 ↗
6. 10.1016/S0010-938X(74)80037-510.1016/S0010-938X(74)80037-5 ↗
7. Kimura M. · Sc
8. 10.5006/1.328066910.5006/1.3280669 ↗
9. Itagaki M. · Sc
10. Panda B. · 2008
11. 10.1007/s12666-008-0005-610.1007/s12666-008-0005-6 ↗
12. Panda B. · Sc
13. Panda B., Balasubramaniam R., Vajpei A. C., Srikanth S., and Bhattacharyya A.: Corros. Eng. Sci. Technol, 2008, in press.
14. Panda B., Balasubramaniam R., Mahapatra S., and Dwivedi G.: Wear (under review).
15. Srikanth S. · Proc. Int. Conf. on ‘CORCON 2004’, New Delhi, India, December 2004, NACE International India Section, paper no. 5.
16. ‘Railway applications-track-rail’, BS EN 13674-1:2003E, European Committee for Standardization, Brussels, Belgium, 2003.
17. Underwood E. E. ‘Quantitative stereology’, 1st edn, 50; 1970, Philippines, PA, Addison-Wesley.
18. 10.1016/S1044-5803(00)00056-510.1016/S1044-5803(00)00056-5 ↗
19. Smith Y. E., and Fletcher F. B.: in ‘Rail steels-developments, processing and use’, (ed.Stone D. H., and Knupp G. G.), 212-232; 1978, Philadelphia, PA, American Society for Testing of Materials.
20. 10.1016/j.jmatprotec.2004.04.07310.1016/j.jmatprotec.2004.04.073 ↗
21. Avner S. H. ‘Introduction to physical metallurgy’, 2nd edn, 273; 1997, New Delhi, Tata McGraw-Hill.
22. 10.1016/S0921-5093(03)00035-210.1016/S0921-5093(03)00035-2 ↗
23. Rajan T. V., Sharma C. P., and Sharma A. ‘Heat treatment, principles and techniques, 47; 1997, New Delhi, Prentice-Hall of India.
24. Marich S., and Curcio P.: in ‘Rail steels-developments, processing and use’, (ed.Stone D. H., and Knupp G. G.), 167-211; 1978, Philadelphia, PA, American Society for Testing of Materials.10.1520/STP27109S ↗
25. Bouse G. K., Bernstein I. M., and Stone D. H.: in ‘Rail steels-developments, processing and use’, (ed.Stone D. H., and Knupp G. G.), 145-166; 1978, Philadelphia, PA, American Society for Testing of Materials.10.1520/STP27107S ↗
26. 10.1016/S1044-5803(00)00113-310.1016/S1044-5803(00)00113-3 ↗
27. 10.1016/S1044-5803(97)00086-710.1016/S1044-5803(97)00086-7 ↗
28. Stone D. H., and Steele R. K.: in ‘Rail steels-developments, processing and use’, (ed.Stone D. H., and Knupp G. G.), 21-62; 1978, Philadelphia, PA, American Society for Testing of Materials.10.1520/STP644-EB ↗
29. Bain E. C., and Paxton W. ‘Alloying elements in steel’, 2nd edn, 57; 1962, Metals Park, OH, American Society for Metals.
30. 10.2355/isijinternational1966.27.57010.2355/isijinternational1966.27.570 ↗
31. 10.1016/S1359-6462(02)00477-310.1016/S1359-6462(02)00477-3 ↗
32. 10.1016/j.engfailanal.2007.11.02110.1016/j.engfailanal.2007.11.021 ↗