journal article·2013-09

Modelling coarsening behaviour of TiC precipitates in high strength, low alloy steels

J H Jang, C-H Lee, H N Han, H K D H Bhadeshia, D-W Suh

Materials Science and Technology· Volume 29· Issue 9
Publisher page

Abstract

Some of the most modern automotive sheet steels rely on a dispersion of fine precipitates based on TiC, generated during the major phase changes that occur as the rolled material is cooled to the coiling temperature. The coils themselves cool extremely slowly, thus leading to the coarsening of the precipitates and a loss of strength. Beginning with a calculation of the interfacial energy, the precipitate coarsening kinetics are modelled as a function of the stoichiometry of titanium and carbon. The purpose was to assess the influences of interface energy and Ti/C stoichiometry which limit the rate at which the dispersion coarsens by the diffusion of solute from the small to the larger particles. It is found that Ti/C ratio plays a critical role; a titanium concentration which is slightly less than required to combine with carbon leads to a dramatic reduction in the coarsening rate.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang, Korea

Korea Institute of Materials Science, Changwon, Korea

Materials Science and Engineering, Seoul National University, Korea

Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang, Korea and Materials Science and Metallurgy, University of Cambridge, UK

Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang, Korea, email dongwoo1@postech.ac.kr

References (25)

Show source-provided references
1. 10.1179/03063458079042648110.1179/030634580790426481 ↗
2. Seto K · JFE GIHO · 2007 · 28
3. 10.1016/j.scriptamat.2009.05.03610.1016/j.scriptamat.2009.05.036 ↗
4. 10.1016/j.actamat.2011.09.05110.1016/j.actamat.2011.09.051 ↗
5. 10.2355/tetsutohagane.93.4910.2355/tetsutohagane.93.49 ↗
6. 10.1016/j.msea.2006.08.06210.1016/j.msea.2006.08.062 ↗
7. 10.1002/andp.1938424011510.1002/andp.19384240115 ↗
8. 10.1016/0022-3697(62)90001-X10.1016/0022-3697(62)90001-X ↗
9. 10.1016/0022-3697(62)90002-110.1016/0022-3697(62)90002-1 ↗
10. 10.1016/0956-7151(92)90056-K10.1016/0956-7151(92)90056-K ↗
11. 10.1016/0956-7151(91)90277-810.1016/0956-7151(91)90277-8 ↗
12. 10.1016/S0921-5093(01)01729-410.1016/S0921-5093(01)01729-4 ↗
13. 10.1007/s11661-001-0258-810.1007/s11661-001-0258-8 ↗
14. 10.1016/0364-5916(94)90028-010.1016/0364-5916(94)90028-0 ↗
15. 10.1071/PH68002110.1071/PH680021 ↗
16. 10.1016/0001-6160(56)90060-810.1016/0001-6160(56)90060-8 ↗
17. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
18. Wagner C · Z. Elektrochem. · 1961 · 65 · 581
19. 10.1016/0001-6160(72)90114-910.1016/0001-6160(72)90114-9 ↗
20. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗
21. 10.1016/S0364-5916(02)00037-810.1016/S0364-5916(02)00037-8 ↗
22. 10.1007/BF0264245310.1007/BF02642453 ↗
23. 10.1007/BF0264561110.1007/BF02645611 ↗
24. 10.1088/0965-0393/12/2/00810.1088/0965-0393/12/2/008 ↗
25. 10.1063/1.35174510.1063/1.351745 ↗