Effects of W substitution on ς and χ phase precipitation and toughness in duplex stainless steels
Source abstract
Abstract
The effects of W on the precipitation behaviour of 25 Cr-6Ni base super duplex stainless steels with various Mo and W contents have been examined following heat treatments in the temperature range 700–1050°C. Upon aging, the major intermetallic phase of the duplex stainless steel containing Mo was σ phase. In duplex stainless steels containing W, χ phase precipitation was enhanced at the early stages of aging and σ phase precipitation retarded. When aged at 900°C for 13.5 min the impact energies of 25Cr-6Ni-3.6Mo, 25Cr-6Ni-3.6Mo-3W, 25Cr-6Ni-2Mo-3.6W and 25Cr-6Ni-1.5Mo-4.3W were reduced to 7,3.6, 19.4, and 28.1 J respectively. Simple addition of W increased brittleness on aging in 25Cr duplex stainless steel. Despite a thin layer of χ phase at the phase boundary having a more deleterious effect on impact toughness than σ phase, W substitution for Mo in the duplex stainless steel did not degrade the overall toughness. The growth rate of χ phase was retarded owing to supersaturation of W in the 7chi; phase. Since σ phase precipitation depended strongly on Mo content, the total amount of intermetallic could be reduced for a given aging condition by W substitution. As W substitution increased, the total intermetallic phase content decreased.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. J. PLEVA: in ‘Stainless steels '84’, 343–352; 1985, London, The Institute of Metals.
2. N. SHRIDHAR, L. H. FLASHE, and J. KOLTS: in ‘New developments in stainless steel technology’, 341–350; 1985, Metals Park, OH, American Society for Metals.
3. H. D. SOLOMON and T. M. DEVINE: in ‘Micron '78’, 430–461; 1978, Philadelphia, PA, ASTM.10.1520/STP36883S ↗
4. A. POZNASKY and P. J. GROBNER: in ‘New developments in stainless steel technology’, 195–206; 1985, Metals Park, OH, American Society for Metals.
5. 10.5006/0010-9312-36.11.61110.5006/0010-9312-36.11.611 ↗
6. J. J. ECKENROD and K. E. PINNOW: in ‘New developments in stainless steel technology’, 77–86; 1985, Metals Park; OH, American Society for Metals.
7. 10.1179/mst.1992.8.8.68510.1179/mst.1992.8.8.685 ↗
8. E. FOLKHARD: ‘Welding metallurgy of stainless steels’, 48–51; 1984, Vienna, New York, Springer-Verlag.
9. J. CHARLES: in ‘Duplex stainless steel '91’, 3; 1991, Les Ulis, France, Les Editions de Physique.