journal article·2013-01

Grain size evolution simulation in aluminium alloys AA 6082 and AA 7020 during hot forward extrusion process

A Foydl, A Segatori, N Ben Khalifa, L Donati, A Brosius, L Tomesani, A E Tekkaya

Materials Science and Technology· Volume 29· Issue 1
Publisher page

Abstract

The present paper investigates the grain size evolution in aluminium alloys AA 6082 and AA 7020 during hot forward extrusion process. The aim of the present work is the definition and implementation of a predictive algorithm that is able to compute the evolution of the grain shape during the process within the finite element method code Deform. Extrusion experiments were performed at two levels: at reduced scale for investigating and identifying the predictive equations and at industrial scale for validating the developed algorithm. At small scale extrusion, a complete factorial plan was performed for two alloys at three different temperatures, three extrusion ratios and two ram speeds: the discards and extrudates from the experiments were quenched immediately in order to avoid any potential recrystallisation, hence allowing measurements of transitional processing steps. At the industrial scale, instead, the 7020 alloy was extruded with two different die designs, thus producing a 20 mm diameter round bar under different extrusion ratios and strain paths. Finite element simulations were initially validated over visioplastic investigations in order to establish an accurate computation of the material flow, then experimental and numerical results were coupled, thus allowing the definition of the grain evolution model that was successfully integrated and validated on industrial scale trials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Forming Technology and Lightweight Construction (IUL) Technische Universität Dortmund, Dortmund 44227, Germany

University of Bologna DIEM Department, Viale Risorgimento 2, Bologna 40136, Italy

References (24)

Show source-provided references
1. 10.1007/s11661-005-0298-610.1007/s11661-005-0298-6 ↗
2. Sweet ED, Caraher SK, Danilova NV, Zhang X: Proc. 8th Int. Aluminum Extrusion Technology Semin., Orlando, FL, USA, May 2004, Aluminum Association, 115–126.
3. 10.1016/S0921-5093(97)00424-310.1016/S0921-5093(97)00424-3 ↗
4. 10.1016/B978-008044164-1/50011-610.1016/B978-008044164-1/50011-6 ↗
5. 10.1179/03063458479041985410.1179/030634584790419854 ↗
6. El Mehtedi M · Key Eng. Mater. · 2012 · 491 · 43
7. 10.1016/S0921-5093(00)00933-310.1016/S0921-5093(00)00933-3 ↗
8. 10.4028/www.scientific.net/MSF.331-337.73310.4028/www.scientific.net/MSF.331-337.733 ↗
9. 10.1016/S1359-6454(03)00078-810.1016/S1359-6454(03)00078-8 ↗
10. 10.1016/0921-5093(95)09990-510.1016/0921-5093(95)09990-5 ↗
11. 10.1016/j.actamat.2008.08.05010.1016/j.actamat.2008.08.050 ↗
12. 10.1016/S0924-0136(02)00343-610.1016/S0924-0136(02)00343-6 ↗
13. 10.1016/j.jmatprotec.2007.03.09610.1016/j.jmatprotec.2007.03.096 ↗
14. Kalz S: ‘Numerische Simulation des Strangpressens mit Hilfe der Methode der finiten Elemente‘, PhD thesis, Shaker Verlag, Aachen, Germany, 2002.
15. 10.1016/0924-0136(92)90005-D10.1016/0924-0136(92)90005-D ↗
16. 10.1007/s12289-010-0785-110.1007/s12289-010-0785-1 ↗
17. 10.4028/www.scientific.net/KEM.367.4710.4028/www.scientific.net/KEM.367.47 ↗
18. Donati L, Ben Khalifa N, Tomesani L, Tekkaya AE: Proc. TMS 140th Annual Meet. and Exhibition, San Diego, CA, USA, February–March 2011, Vol. 2, 245–252.10.1002/9781118062142.ch31 ↗
19. Valberg H · J. Mater. Process. Technol. · 2012 · 3 · 387
20. 10.4028/www.scientific.net/KEM.424.3510.4028/www.scientific.net/KEM.424.35 ↗
21. Segatori A, Foydl A, Donati L, Ben Khalifa N, Brosius A, Tomesani L, Tekkaya AE: Proc. Int. Conf. on ‘Aluminum alloys’, Yokohama, Japan, September 2010, The Japan Institute of Light Metals (JILM), 2034–2039.
22. Petzow G: ‘Metallographisches, Keramographisches, Plastographisches Ätzen‘, 6th edn; 2006, Berlin, Borntraeger.
23. Kammler M · Int. Fachzeitung Metall. · 2010 · 64 · 419
24. 10.1504/IJSURFSE.2010.02962710.1504/IJSURFSE.2010.029627 ↗