journal article·2001-12

Precipitation and hot ductility of low C-V and low C-V-Nb microalloyed steels during thin slab casting

K. Banks, A. Koursaris, F. Verdoorn, A. Tuling

Materials Science and Technology· Volume 17· Issue 12
Publisher page

Abstract

The as cast hot ductility of low C-V, low C-V-Nb, and niobium microalloyed steels has been investigated using in situ melted tensile specimens, which were subjected to cooling rates and strain rates found typically in thin slab casting. Stress relaxation tests were performed on in situ melted specimens to monitor the kinetics of strain induced precipitation in the above steels. Although the addition of niobium to low C-V and low C-V-N steels increased the temperature at which ductility began to deteriorate, ductility was improved in the low temperature region of the austenite. This was attributed to a delay in NbVC,N precipitation in V-Nb steels. Increasing the nitrogen content did not influence the temperature at the onset of ductility loss in low C-V and low C-V-Nb steels, but did increase the temperature marking the onset of the ductility trough. Faster cooling rates led to a deterioration of ductility in low C-V-N and low C-V-Nb-N steels. The as cast ductility of low C-V and low C-V-Nb steels was superior to that as of cast peritectic C-Nb steel as well as reheated peritectic C-V and peritectic C-V-Nb steels.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 10.1179/03071697980327647110.1179/030716979803276471 ↗
2. 10.1179/mst.1990.6.9.79310.1179/mst.1990.6.9.793 ↗
3. CROWTHER D. N. · ISS Mech. Work. Steel Process. Conf. Proc · 1997 · 35 · 839
4. TURKDOGAN E. T. · ISS Steelmaking Conf. Proc · 1987 · 70 · 399
5. THOMAS B. G. · ISS Trans · 1986 · 7
6. MINTZ B. · LW Int · 1999 · 39 · 833
7. B. MINTZ and R. ABUSHOSHA: in `Microalloying in steels', (ed. J. M. Rodriquez-Ibabe et al), 461–468; 1998, Aedermanns-dorf, Trans Tech.10.4028/www.scientific.net/MSF.284-286.461 ↗
8. 10.2355/isijinternational1966.24.5410.2355/isijinternational1966.24.54 ↗
9. MINTZ B. · ISS Mech. Work. Steel Process Conf. Proc · 1993 · 30 · 391
10. 10.2355/isijinternational1966.25.14910.2355/isijinternational1966.25.149 ↗
11. W. J. LIU and J. J. JONAS: in 'Processing, microstructure and properties of HSLA steels', (ed. A. J. DeAardo), 39–50; 1988, Warrendale, PA, TMS.
12. 10.1179/mst.1992.8.2.17110.1179/mst.1992.8.2.171 ↗
13. 10.1179/mst.1986.2.6.58910.1179/mst.1986.2.6.589 ↗
14. 10.1007/BF0265456410.1007/BF02654564 ↗
15. BANKS K. M. · ISS Mech. Work. Steel Process Conf. Proc · 2000 · 38 · 329
16. 10.1007/BF0265830110.1007/BF02658301 ↗
17. 10.1016/0001-6160(83)90076-710.1016/0001-6160(83)90076-7 ↗
18. 10.1007/BF0280117710.1007/BF02801177 ↗
19. 10.1179/msc.1979.13.3-4.23810.1179/msc.1979.13.3-4.238 ↗
20. MINTZ B. · Ironmaking Steelmaking · 1993 · 20 · 446
21. 10.1179/mst.1998.14.4.34610.1179/mst.1998.14.4.346 ↗
22. 10.2355/isijinternational1966.27.22210.2355/isijinternational1966.27.222 ↗
23. 10.2355/isijinternational.34.52810.2355/isijinternational.34.528 ↗
24. 10.1007/BF0267075210.1007/BF02670752 ↗
25. B. MINTZ, R. ABUSHOSHA, Y. AYYAD, and G. I. S. L. CARDOSO: Proc. Conf. on `FISLA steel,' 342–345; 1995, Beijing, China Science and Technology Press.
26. 10.2355/isijinternational1966.28.102110.2355/isijinternational1966.28.1021 ↗
27. 10.2355/isijinternational1966.27.36610.2355/isijinternational1966.27.366 ↗
28. B. MINTZ and Z. MOHAMED: Proc. 7th Int. Conf. on 'Advances in fracture research', Hamilton, TX, USA, March 1989, 2545–2553; Oxford, Pergamon Press.