Particle redistribution and matrix microstructure evolution during hot extrusion of cast SiC p reinforced aluminium alloy matrix composites
Source abstract
Abstract
The aim of the present investigation is to understand particle redistribution and matrix microstructure development during hot extrusion of aluminium matrix composites and the influence of process parameters on these two key microstructural features. Cast composite billets have been partially extruded to study the sequence of microstructure development. Strain and strain rate distribution in the partial extrudates have been measured using a ‘visioplasticity’ technique. Results indicate that strain and strain rate distribution are more homogeneous in the composites than in the unreinforced alloy. Extrudate microstructures reveal the presence of particle bands and deformation bands aligned in the extrusion direction. It is noted that shearing of SiC particle clusters leads to particle banding, and an increase in extrusion ratio and/or a decrease in particle size enhances particle band formation. This phenomenon is attributed to increasing strain partitioning between the cluster and the matrix with increasing strain and/or decreasing particle size. The formation of deformation bands is attributed to a grain splitting phenomenon which is found to be more extensive in composites compared with the unreinforced alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. KOZACK M. J. KHATRI S. C. ALISON J. E. and BADER M. G.: in ‘Fundamentals of MMCs’ (ed. S. Suresh et al.) 297-326; 1993 Boston MA Butterworth-Heinemann.10.1016/B978-0-08-052371-2.50020-1 ↗
2. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
3. 10.1007/BF0111387210.1007/BF01113872 ↗
4. CARVALHO M. H. CARVALHINHOS H. and SELLARS C. M.: Powder Metall. 1990 33 (4) 339–348.10.1179/pom.1990.33.4.339 ↗
5. 10.1016/0266-3538(89)90092-410.1016/0266-3538(89)90092-4 ↗
6. 10.1016/S0956-716X(99)80056-910.1016/S0956-716X(99)80056-9 ↗
7. DAVIES C. H. J.: Key Eng. Mater. 1995 104-107 447-457.10.4028/www.scientific.net/KEM.104-107.447 ↗
8. CHOSH A. K.: in ‘Fundamentals of MMCs’ (ed. S. Suresh et al) 23-41; 1993 Boston MA Butterworth-Heinemann.
9. WAGNER H. W. and WOLF J.: in Proc. Conf. ‘ICCM 10’ (ed. Poursartip A. and Street K.) 67-74; 1995 Whistler BC Woodhead Publishing.
10. LLOYD D. J.: in Proc. 12th Riser Symp. on Materials Science ‘MMCs — processing microstructure and properties’ (ed. Hansen N. et al) 81-99; 1991 Roskilde Denmark Riser National Laboratory.
11. 10.1016/0921-5093(91)90567-710.1016/0921-5093(91)90567-7 ↗
12. JENSEN D. JUUL LIU Y. L. and HANSEN N.: in Proc. 12th Riser Symp. on Materials Science ‘MMCs — processing micro-structure and properties’ (ed. Hansen N. et al.) 417–422; 1991 Roskilde Denmark Rise) National Laboratory.
13. 10.1016/0956-716X(94)90270-410.1016/0956-716X(94)90270-4 ↗
14. 10.1007/BF0050633410.1007/BF00506334 ↗
15. 10.1007/BF0173029910.1007/BF01730299 ↗
16. SAMAJDAR I. : PhD thesis 1994 Drexel University Philadelphia PA USA.
17. SAMAJDAR I. and pottmrv R. D.: Acta Metall. Mater. to be published.
18. BELLIER S. and DOHERTY R. D.: Acta Metall. 1977 25 521–538.10.1016/0001-6160(77)90192-4 ↗
19. Hu H.: Acta Metall. 1962 10 1112–1116.10.1016/0001-6160(62)90083-4 ↗
20. WALTER J. L. and KOCH E. F.: Acta Metall. 1963 11 923–938.10.1016/0001-6160(63)90062-2 ↗
21. DUGGAN B. J., and CHUNG C. Y.: Mater. Sci. Forum, 1994, 157–162, 1765-1770.
22. 10.1016/0956-7151(93)90138-I10.1016/0956-7151(93)90138-I ↗
23. DOHERTY R. D. SAMAJDAR I. NECKER C. T. VATNE H. E. and NES E.: in Proc. 16th Rise/ Int. Symp. on Materials Science ‘Microstructural and crystallographic aspects of recrystalliz-ation’ (ed. Hansen N. et al.) 1–23; 1995 Roskilde Denmark Riso National Laboratory.
24. SHABAIK A. and KOBAYASHI S.: Trans. AIME May 1967 339–346.10.1115/1.3610050 ↗
25. MANNIKAR S. DUTTA B. and SURAPPA At. K.: in Proc. Conf. ‘ICCM 10’ (ed. Poursatip A. and Street K.) 473-480; 1995 Whistler BC Woodhead Publishing.
26. 10.1179/03071697480328783410.1179/030716974803287834 ↗