Prediction of residual stress distributions for single weld beads deposited on to SA508 steel including phase transformation effects
Source abstract
Abstract
The sensitivity of residual stress distributions in bainitic–martensitic steel welds to the transformation strains that arise when austenite decomposes on cooling has been assessed by examining the predictions of three models for a simple bead-on-plate configuration. These cover the following scenarios: case I, no phase transformations; case II, transformations with volume change effects only; case III, transformations with volume change effects and associated Greenwood–Johnson transformation plasticity. Austenite decomposition was predicted by implementing Kirkaldy's reaction rate equations as a subroutine in the finite element code Sysweld, eliminating the need for a continuous cooling transformation diagram. Predicted residual stresses were then compared and rationalised alongside measurements obtained by neutron diffraction and the contour method. It was found that serious errors in predicting the location and magnitude of the peak stresses occurred if transformations were not included, while cases II and III gave similar results generally in agreement with the stress maps. Indeed, the trends in the experimental results were intermediate between cases II and III. Differences between the models and the potential for further improvements are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of MaterialsUniversity of Manchester, Grosvenor Street, Manchester M1 7HS, UK;, Email: hui.dai@manchester.ac.uk
School of MaterialsUniversity of Manchester, Grosvenor Street, Manchester M1 7HS, UK
References (39)
Show source-provided references
1. 10.1179/174328407X21311610.1179/174328407X213116 ↗
2. 10.1088/0034-4885/70/12/R0410.1088/0034-4885/70/12/R04 ↗
3. 10.1016/0308-0161(84)90028-010.1016/0308-0161(84)90028-0 ↗
4. 10.1016/0013-7944(89)90212-910.1016/0013-7944(89)90212-9 ↗
5. 10.1002/mawe.20050093310.1002/mawe.200500933 ↗
6. Turski M., Bouchard P. J., Steuwer A., and Withers P. J.: Acta Mater. 2008, 56, (14), 3598–3612.10.1016/j.actamat.2008.03.045 ↗
7. Bouchard P. J., Withers P. J., McDonald S. A., and Heenan R. K.: Acta Mater. 2004, 52, 23–34.10.1016/j.actamat.2003.08.022 ↗
8. 10.1016/0013-7944(86)90008-110.1016/0013-7944(86)90008-1 ↗
9. 10.1016/S0013-7944(00)00075-810.1016/S0013-7944(00)00075-8 ↗
10. 10.1243/030932400151443110.1243/0309324001514431 ↗
11. 10.1179/174328408X37207410.1179/174328408X372074 ↗
12. 10.1115/1.312203610.1115/1.3122036 ↗
13. Jones W. K. C., and Alberry P. J.: in ‘Residual stresses in welded construction and their effects’, (ed. R.W. Nichols),Vol. 1, 15-26; 1977, London, Cambridge, Welding Institute.
14. Yamamoto J., Muramatsu Y., Zenitani S., Hayakawa N., and Hiraoka K.: Proc. 6th Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, April 2002, ASM International,902–905.
15. 10.1007/s11661-008-9616-010.1007/s11661-008-9616-0 ↗
16. Group ESI, Sysweld Theory Manuals, ESI UK John Eccles House, the Oxford Science Park, Oxford, 2007.
17. 10.1179/03063458279042721710.1179/030634582790427217 ↗
18. Li M. V., Niebuhr D. V., Meekisho L. L., and Atteridge D. G.: Metall Mater. Trans. B, 1998, 29B, (3),661–672.10.1007/s11663-998-0101-3 ↗
19. Bhadeshia H. K. D. H.: Mater. Sci. Eng. A, 2004, A378, (1-2),34–39.10.1016/j.msea.2003.10.328 ↗
20. Kirkaldy J. S., and Venugopalan D.: in ‘Phase transformations in ferrous alloys’, (eds. A. R. Marder and J. I. Goldstein), 125-148; 1984, New York, AIME.
21. 10.1016/0022-5096(86)90009-810.1016/0022-5096(86)90009-8 ↗
22. 10.1179/02670830110151008710.1179/026708301101510087 ↗
23. Bhadeshia H. K. D. H.: in ‘Mathematical modelling of weld phenomena 2’, (eds. H. Cerjak, et al), 71-118; 1995, London, Institute of Materials.
24. Moat R. J., Peel M., Withers P. J., Preuss M., and Mori T.: To be submitted to Scripta Met.
25. 10.1016/j.msea.2006.04.08310.1016/j.msea.2006.04.083 ↗
26. Prime M. B. · Trans. ASME · 2001 · 123 · 16210.1115/1.1336510 ↗
27. ABAQUS User ‘s Manual, Version 6.6. Hibbit, Karsson and Sorenson, Inc., Pawtucket, RI, USA, 2006.
28. Satoh K. · Trans. Jpn Weld. Soc · 1972 · 3 · 125
29. 10.1007/BF0266733310.1007/BF02667333 ↗
30. 10.4028/www.scientific.net/MSF.524-525.82710.4028/www.scientific.net/MSF.524-525.827 ↗
31. Kumaresan D., Potti R. K., and Muthu L.: Proc. ASME Conf. on ‘Pressure vessels and piping division’, Vancouver, BC, Canada, July 2006, ASME, Paper no. 93836.
32. Zener C. · Trans. AIME · 1946 · 167 · 550
33. Hillert M. · Jernkont. Ann · 1957 · 141 · 557
34. Software NPL MTDATA, Laboratory National Physical, Teddington UK, 2006.
35. Andrews K. W. · J. Iron Steel Inst · 1969 · 203 · 721
36. 10.1016/0001-6160(59)90170-110.1016/0001-6160(59)90170-1 ↗
37. Belytschko W. K. Liu and B. Moran: ‘Non-linear finite elements for continua and structures’ 2000, Chichester, John Wiley and Sons.
38. 10.1524/9783486992564-03010.1524/9783486992564-030 ↗
39. 10.1179/mst.1991.7.8.68610.1179/mst.1991.7.8.686 ↗