Mechanical properties of conventionally cast, directionally solidified, and single-crystal superalloys
Source abstract
Abstract
In this paper the authors compare the creep and low-cycle fatigue properties of conventional, directionally solidified, and single-crystal castings produced from nickel-base superalloys. A brief historical review describes the reasons for the evolution from wrought to cast product through directionally solidified to modern single-crystal (‘monocrystal’) castings. The influence of microstructural variations produced by the casting conditions, such as porosity and grain size, on creep and low-cycle fatigue properties are illustrated. The important aspects of postsolidification heat treatment, hot isostatic pressing, and the damaging effects of impurities are described for conventional castings. The results of controlling the microstructures produced by directional solidification especially by high temperature gradient solidification are demonstrated by comparing the creep properties of directionally solidified materials with those of the conventionally cast alloys in long-term tests. The creep and low-cycle fatigue properties depend on the stress direction relative to the crystallographic directions of the material for both directionally solidified and single-crystal castings. For single crystals, individual alloys show variable dependences of properties on the crystallographic directions. Directionally solidified materials show advantages in thin sections and are less sensitive to the effects of impurities compared to conventional castings.MST/329
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. SMART R. F. · Metallurgia · 1977 · 44 · 286
2. E. BACHELET and J. C. LESOULT: in ‘High temperature alloys for gas turbines’, (ed. D. Coutsauradis et al.), 665; 1978, London, Applied Science.
3. R. STICKLER: ‘Summary of the physical and mechanical property data of the Ni-base superalloy, IN 738 LC’, Report 81—UW—COST—B1, University of Vienna, 1981.
4. T. B. GIBBONS and R. STICKLER: in ‘High temperature alloys for gas turbines’, (ed. R. Brunetaud et al.), 369; 1982, Dordrecht, Reidel Publishing Company.10.1007/978-94-009-7907-9_15 ↗
5. MILES A. G. · The Nimonic alloys',
6. uncic B. · British Investment Caster's Technical Association 14th Annual Conference, Blackpool, Apr. 1977, Paper 5
7. W. BETTERIDGE and P. A. MORGAN: in ‘The Nimonic alloys’, (ed. W. Betteridge and J. Heslop), 17; 1974, London, Edward Arnold.
8. V. LUPINC and T. B. GIBBONS: in ‘High temperature alloys for gas turbines’, (ed. D. Coutsauradis et al.), 335; 1978, London, Applied Science.
9. VERSNYDER F. L. · Trans. ASM · 1960 · 52 · 485
10. PIEARCEY B. J. · US Patent 3,494,709, ‘Single crystal metallic part’, 10 Feb. 1970, United Technologies Corp
11. F. L. VERSNYDER and M. GELL: in ‘Fundamental aspects of structural alloy design’, (ed. R. J. Jalfe and B. Wilcox), 000; 1977, New York, Plenum Press.
12. P. VIATOUR, D. COUTSALTRADIS, L. HABRAKEN, and J. M. DRAPIER: in ‘High temperature alloys for gas turbines’, (ed. D. Coutsauradis et al.), 875; 1978, London, Applied Science.
13. TIPLER H. R. · 1981
14. GIBBONS T. B. · 1981
15. GRAY J. · unpublished results, Rolls-Royce Ltd, Derby, 1985.
16. McCOLVIN G. M. · 1977
17. c. T. Sims: in ‘The Superalloys’, (ed. C. T. Sims and W. C. Hagel), 259; 1972, New York, John Wiley.
18. R. STICKLER: in ‘High temperature materials in gas turbines’, (ed. P. R. Sahm and M. O. Spiedel), 115; 1974, Amsterdam, Elsevier.
19. LAMBERIGTS M. · ‘Superalloys 1980' · 1980 · 285
20. 10.1016/0026-0800(80)90015-410.1016/0026-0800(80)90015-4 ↗
21. ANTONY K. C. · 1980 · 257
22. 10.1179/03071698480327480010.1179/030716984803274800 ↗
23. ANTONY K. C. · 1977 · 137
24. DURBER G. L. R. · MetallUrgia · 1979 · 46 · 628
25. 10.1179/03071698480327425110.1179/030716984803274251 ↗
26. HARRIS K. · 111 ‘Vacuum metallurgy’, 389; 1977, New York, American Vacuum Society
27. M. LAMBERIGTS, J. M. THERET, and J. M. DRAPIER: in ‘High temperature alloys for gas turbines 1982’, (ed. R. Brunetaud et al.), 747; 1983, Dordrecht, Reidel Publishing.10.1007/978-94-009-7907-9_36 ↗
28. HONNORAT Y. · Proc. AGARD/NATO Conf. no. 356 on ‘Materials substitution and recycling’, Vimeiro · 1983
29. BURKE J. J. · paper presented at 1978 Annual AIME Meeting, Denver, Colo., Feb. 1978
30. NORTHWOOD J. E. · Metaihirgia · 1974 · 41 · 254
31. P. N. QUESTED and M. McLEAN: in ‘Solidification technology in the foundry and cast house’, 586; 1983, London, The Metals Society.
32. M. McLEAN and P. N. QUESTED: in ‘Creep and fracture of engineering materials and structures’, (ed. B. Wilshire and D. R. J. Owen), 157; 1981, Swansea, Pineridge Press.
33. P. N. QUESTED, P. J. HENDERSON, K. MENZIES, and M. McLEAN: ‘Mechanical behaviour of Ni—Cr-base superalloys in forms and conditions representative of service’, NPL Report DMA(A) 94, COST 50, 1984.
34. DONNER A. · 1984
35. SCHUBERT F. · 1977
36. P. R. SAHM and F. SCHUBERT: ‘Solidification and casting of metals’, 389; 1979, London, The Metals Society.
37. 10.1007/BF0264449310.1007/BF02644493 ↗
38. KHAN T. · Mater. Sci. Technol., this issue, 486-492
39. THOMAS G. B. · unpublished results, NPL, Teddington, 1984.
40. M. McLEAN: ‘Directionally solidified materials for high temperature service’, 157; 1983, London, The Metals Society.
41. KEAR B. H. · Trans. AIME · 1967 · 239 · 1209
42. GIAMEE A. F. · Int. Metals Review · 1984 · 29 · 136
43. J. C. GALSWORTHY and C. M. HEAWOOD: in ‘High temperature alloys for gas turbine engines, 1982’, (ed. R. Brunetaud et al.), 771; 1983, Dordrecht, Reidel Publishing.10.1007/978-94-009-7907-9_38 ↗
44. M. R. WINSTONE and J. E. NORTHWOOD: in ‘Solidification technology in the foundry and cast house’, 298; 1983, London, The Metals Society.
45. 10.1016/0025-5416(70)90050-910.1016/0025-5416(70)90050-9 ↗
46. HARRIS K. · 111 ‘SUperallOyS 1984', (ed. M. Gell et al.), 221; 1984, Warrendale, Pa, The Metallurgical Society of AIME
47. MEETHAM G. W. · Metall. Mater. Technol., · 1982 · 14 · 387
48. 10.1016/0025-5416(83)90199-410.1016/0025-5416(83)90199-4 ↗