journal article·2015-09

Quantification of deformation induced α’-martensite in Fe–19Cr–3Mn–4Ni–0.15C–0.15N austenitic steel by in situ magnetic measurements

M. Hauser, M. Wendler, S. Ghosh Chowdhury, A. Weiß, J. Mola

Materials Science and Technology· Volume 31· Issue 12
Publisher page

Abstract

An in situ magnetic device was employed to quantify the deformation induced martensite in a Fe–19Cr–3Mn–4Ni–0.15C–0.15N (wt-) steel during tensile testing in the temperature range of −40 to 22°C. The new device consists of an electromagnetic field which serves to magnetise the martensite phase as it forms during tensile loading and a second coil to detect the effective electrical potential difference induced by the magnetisation of tensile specimens. To implement the in situ measurement system, a correlation was necessary between the induced electrical potential difference and the deformation induced martensite fractions during uniaxial static tensile tests. The correlation procedure was found to require only the quantification of deformation induced martensite content in a tensile specimen strained until fracture using an ex situ magnetic saturation unit.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Iron and Steel Technology TU Bergakademie Freiberg, Freiberg 09599, Germany

MST Division CSIR-National Metallurgical Laboratory, Jamshedpur 831007, India

References (32)

Show source-provided references
1. 10.1016/0956-7151(92)90114-T10.1016/0956-7151(92)90114-T ↗
2. 10.1016/S0749-6419(99)00078-910.1016/S0749-6419(99)00078-9 ↗
3. 10.1007/BF0264204210.1007/BF02642042 ↗
4. 10.1016/0025-5416(76)90084-710.1016/0025-5416(76)90084-7 ↗
5. 10.1016/0001-6160(77)90202-410.1016/0001-6160(77)90202-4 ↗
6. 10.1007/BF0291342010.1007/BF02913420 ↗
7. 10.1007/BF0264740610.1007/BF02647406 ↗
8. 10.1016/j.msea.2010.12.02210.1016/j.msea.2010.12.022 ↗
9. 10.1179/174328408X29360310.1179/174328408X293603 ↗
10. 10.4028/www.scientific.net/SSP.172-174.17210.4028/www.scientific.net/SSP.172-174.172 ↗
11. 10.1016/0001-6160(65)90126-410.1016/0001-6160(65)90126-4 ↗
12. 10.1016/j.matchar.2014.01.02510.1016/j.matchar.2014.01.025 ↗
13. 10.1016/j.actamat.2012.09.07810.1016/j.actamat.2012.09.078 ↗
14. 10.1179/174328408X35372310.1179/174328408X353723 ↗
15. 10.1007/s10853-006-0025-810.1007/s10853-006-0025-8 ↗
16. 10.1016/S0921-5093(01)00965-010.1016/S0921-5093(01)00965-0 ↗
17. Zhao L · Int. Conf. TRIP-Aided High Strenght Ferr. Alloys · 2002 · 71
18. 10.1179/026708304X436710.1179/026708304X4367 ↗
19. 10.1007/BF0055224210.1007/BF00552242 ↗
20. 10.1007/s11340-010-9374-y10.1007/s11340-010-9374-y ↗
21. Magnabosco R: ‘Comparative study of ferrite quantification methods applied to duplex stainless steels’, Proc. 7th European Stainless Steel Conf., Como, Italy, September 2011, AIM.
22. 10.1016/0001-6160(70)90104-510.1016/0001-6160(70)90104-5 ↗
23. 10.1016/j.msea.2006.12.20410.1016/j.msea.2006.12.204 ↗
24. 10.1107/S160057671401195910.1107/S1600576714011959 ↗
25. Liu WP and Bunge HJ: ‘Orientation dependence of martensitic and reverce transformations in a textured Fe-30 Ni alloy’, European Symposium on Martensitic Transformations, Bochum, Germany, 1989, 441–448.10.1051/esomat/198908011 ↗
26. Kim S.-J · Steel Res. Int. · 2009 · 80 · 467
27. 10.1016/0001-6160(53)90083-210.1016/0001-6160(53)90083-2 ↗
28. 10.1002/srin.20110006510.1002/srin.201100065 ↗
29. 10.1007/BF0264661410.1007/BF02646614 ↗
30. 10.1016/j.jmmm.2005.02.06510.1016/j.jmmm.2005.02.065 ↗
31. 10.1007/BF0245018010.1007/BF02450180 ↗
32. 10.1063/1.333419810.1063/1.3334198 ↗