Diffusion brazing of cast INCONEL 718 superalloy utilising standard heat treatment cycle
Source abstract
Abstract
The time required to ensure completion of the isothermal solidification process is the key in obtaining an intermetallic free and robust joint after diffusion brazing. In view of economic considerations, it is interesting to perform bonding process trials using standard heat treatment cycles. This paper addresses the effect of applying the standard heat treatment cycle including homogenisation, solution and double aging treatments on the microstructural and mechanical response of diffusion brazed IN718. A commercial Ni–7Cr–4·5Si–3·2B–3Fe (wt-) brazing alloy was used as the interlayer. Results showed that bonds made with the standard homogenisation treatment, at 1100°C, exhibited a eutectic free joint centreline. After applying the standard solution and double aging treatment, a bond with a joint efficiency of 82 relative to base metal was obtained in terms of shear strength. Room temperature tensile properties and stress rupture properties of the diffusion brazed joint were better than the minimum requirement of the AMS5383 acceptance standard.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering Sharif University of Technology, Tehran 11365-11155, Iran
References (24)
Show source-provided references
1. 10.1007/s10853-009-3691-510.1007/s10853-009-3691-5 ↗
2. 10.1016/j.msea.2011.10.01410.1016/j.msea.2011.10.014 ↗
3. 10.1016/j.jallcom.2007.07.10810.1016/j.jallcom.2007.07.108 ↗
4. 10.1179/mst.1985.1.8.60810.1179/mst.1985.1.8.608 ↗
5. Oshobe O.E. ‘Fiber laser welding of nickel-based superalloy Inconel 718’, MSc thesis, The University of Manitoba, Winnipeg, Man., Canada, 2012.
6. 10.1080/14786435.2011.58028710.1080/14786435.2011.580287 ↗
7. 10.1007/s11661-998-0183-110.1007/s11661-998-0183-1 ↗
8. 10.1179/13621710422502172410.1179/136217104225021724 ↗
9. 10.1016/j.jallcom.2013.02.10010.1016/j.jallcom.2013.02.100 ↗
10. 10.1016/j.msea.2013.01.02910.1016/j.msea.2013.01.029 ↗
11. 10.1016/j.matdes.2013.03.03010.1016/j.matdes.2013.03.030 ↗
12. 10.1016/j.msea.2006.10.04510.1016/j.msea.2006.10.045 ↗
13. Duvall D.S. · Weld. J. · 1974 · 53 · 203
14. 10.1016/j.jallcom.2008.01.10110.1016/j.jallcom.2008.01.101 ↗
15. 10.1016/j.msea.2008.01.03210.1016/j.msea.2008.01.032 ↗
16. Humpston G., and Jacobson D.M. ‘Principles of soldering and brazing’; 1993, Metals Park, OH, ASM International.
17. Aerospace Material Specifications (AMS), AMS5383, Revision E, 2007.
18. Butts D.A. ‘Transient liquid phase bonding of a third generation gamma-titanium aluminium alloy – Gamma Met PX’, PhD thesis, Auburn University, AL, USA, 2005.
19. 10.1179/imr.1995.40.5.18110.1179/imr.1995.40.5.181 ↗
20. 10.1007/s11661-000-0114-210.1007/s11661-000-0114-2 ↗
21. Massalski T.B. ‘Binary alloy phase diagrams’; 1986, Metals Park, OH, ASM International.
22. 10.2497/jjspm.18.31610.2497/jjspm.18.316 ↗
23. Arafin M.A., Medraj M., Turner D.P., and Bocher P. ‘Optimization of process variables during TLP bonding of nickel superalloys’, Proc. 45th Int. Conf. of Metallurgists, COM 2006, ‘Aerospace materials & manufacturing: emerging materials, processes, and repair techniques’, Montreal, Que., Canada, October 2006, Metallurgical Society of the Canadian Institute of Mining and Metallurgy, 301–313.
24. Lippold J., Kiser S.D., and DuPont J.N. ‘Welding metallurgy and weldability of nickel-base alloys’; 2009, New York, Wiley Publishing.