Effect of welding parameters on microstructure and mechanical properties of friction stir welded EN AW 5083 H111 plates
Source abstract
Abstract
Microstructural features and mechanical properties of friction stir welded (FSW) EN AW 5083 H111 plates were investigated. Friction stir welding led to the fragmentation of coarse Al6(Mn,Fe) particles, the dissolutionising of fine Al3Mg2 particles and to recrystallisation across the nugget zone (NZ), producing hardness profiles that show little or no variation across the joint. The joints produced at a welding speed of 80 mm/min were larger than those produced at 125 mm/min. The shape of the joint, on the other hand, was dictated by the pin profile. Joints produced by the threaded circular pin invariably revealed elliptical NZs while the NZs of the joints produced by the triangular pin were basin-shaped. The welding speed also had an impact on the NZ grain size and the tensile properties of the joint. The NZ grain size was smaller, the ultimate tensile strength (UTS) and the elongation values were higher at a welding speed of 80 mm/min than at 125 mm/min for both pin profiles. The superior tensile properties at the lower welding speed were consistent with the smaller grain size and bigger joints in the former. The joint efficiency of the EN AW 5083 plates welded with a triangular pin at a tool rotation rate and welding speed of 800 rpm and 80 mm/min, respectively, was estimated to be as high as 97.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Institute, Marmara Research Centre, Tubitak, Gebze, Kocaeli, Turkey
Dokuz Eylul University, Izmir Vocational School, Dept. Tech. Prog., İzmir, Turkey
References (48)
Show source-provided references
1. 10.1016/B978-0-408-70932-3.50065-610.1016/B978-0-408-70932-3.50065-6 ↗
2. DavisJR: ‘Aluminum and aluminum alloys, ASM specialty handbook’; 1996, Materials Park, OH, ASM International.
3. Mathers G: ‘The welding of aluminium and its alloys’; 2002, Cambridge, Woodhead Publishing Limited.10.1201/9781439823224 ↗
4. 10.1007/s11661-001-0351-z10.1007/s11661-001-0351-z ↗
5. 10.1016/S1003-6326(11)61173-410.1016/S1003-6326(11)61173-4 ↗
6. Thomas WM, Nicholas ED, Needham JC, Murch MG, Templesmith P, Dawes CJ: Friction Stir Butt Welding, International Patent Application No. PCT/GB92/02203, 1991.
7. 10.1179/174328009X41113610.1179/174328009X411136 ↗
8. 10.1007/BF0326640310.1007/BF03266403 ↗
9. 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
10. 10.4028/www.scientific.net/MSF.618-619.4110.4028/www.scientific.net/MSF.618-619.41 ↗
11. Xu X · Adv. Mat. Res. · 2012 · 418 · 1346
12. 10.1016/j.matdes.2009.03.01810.1016/j.matdes.2009.03.018 ↗
13. 10.1179/1362171811Y.000000001210.1179/1362171811Y.0000000012 ↗
14. 10.1016/j.msea.2006.08.01210.1016/j.msea.2006.08.012 ↗
15. 10.1016/j.msea.2007.05.07410.1016/j.msea.2007.05.074 ↗
16. 10.1007/s11665-009-9536-110.1007/s11665-009-9536-1 ↗
17. 10.1016/j.matdes.2012.02.01610.1016/j.matdes.2012.02.016 ↗
18. 10.1115/1.293114310.1115/1.2931143 ↗
19. 10.1016/j.msea.2006.12.07910.1016/j.msea.2006.12.079 ↗
20. 10.1016/S1359-6454(03)00319-710.1016/S1359-6454(03)00319-7 ↗
21. 10.1007/BF0258613910.1007/BF02586139 ↗
22. 10.1023/A:102268890888510.1023/A:1022688908885 ↗
23. 10.1016/j.jmatprotec.2007.10.02810.1016/j.jmatprotec.2007.10.028 ↗
24. 10.1016/j.msea.2011.07.05610.1016/j.msea.2011.07.056 ↗
25. Birol Y., Kasman S, J. Mater. Eng. Performance, DOI: 10.1007/s11665-013-0607-y.10.1007/s11665-013-0607-y ↗
26. 10.1016/j.msea.2006.12.05510.1016/j.msea.2006.12.055 ↗
27. 10.1007/s11661-999-0251-110.1007/s11661-999-0251-1 ↗
28. 10.1007/s11663-002-0059-510.1007/s11663-002-0059-5 ↗
29. 10.1179/13621710010153833510.1179/136217100101538335 ↗
30. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
31. 10.1016/j.actamat.2005.03.04410.1016/j.actamat.2005.03.044 ↗
32. 10.1016/0921-5093(94)09644-910.1016/0921-5093(94)09644-9 ↗
33. 10.1016/0921-5093(95)09990-510.1016/0921-5093(95)09990-5 ↗
34. 10.1007/s11661-001-0178-710.1007/s11661-001-0178-7 ↗
35. Ma ZY, Mishra RS, Mahoney MH:in ‘Friction stir welding and processing II’(, Jata K V, et al.), 221–230; 2003, TMS.
36. Humphreys FJ, Hotherly M: ‘Recrystallization and related annealing phenomena’; 1995, New York, Pergamon Press.10.1016/B978-0-08-041884-1.50017-9 ↗
37. 10.1016/S1359-6454(02)00278-110.1016/S1359-6454(02)00278-1 ↗
38. Mahoney M, Mishra RS, Nelson T, Flintoff J, Islamgaliev R, Hovansky Y:in ‘Friction Stir Welding and Processing’(, Jata K V, et al.), 183–194; 2001, Warrendale, PA, TMS.
39. 10.1007/s11661-998-0021-510.1007/s11661-998-0021-5 ↗
40. Bradley GR, Hattingh DG, Yio TC, James MN, in: 1st International Conference on Fatigue Crack Paths, Parma, Italy, 2003.
41. Bendzsak GJ, North TH, Smith CB: Proc. 2nd Friction Stir Welding Symp.; June 2000, Gothenburg, Sweden, TWI Cambridge.
42. 10.1016/S0142-1123(03)00060-410.1016/S0142-1123(03)00060-4 ↗
43. Lamarre A, Moles M: Procs 15th World Conf. on Nondestructive Testing, 173–179; 2000, Rome, Italy.
44. 10.1007/s12540-009-0321-310.1007/s12540-009-0321-3 ↗
45. 10.1007/s10853-012-6261-110.1007/s10853-012-6261-1 ↗
46. 10.1016/j.scriptamat.2006.08.05410.1016/j.scriptamat.2006.08.054 ↗
47. 10.1016/j.msea.2012.09.04110.1016/j.msea.2012.09.041 ↗
48. 10.1016/j.actamat.2009.07.06510.1016/j.actamat.2009.07.065 ↗