journal article·1997-05

State of residual stress induced by cyclic rolling contact loading

A. P. Voskamp, E. J. Mittemeijer

Materials Science and Technology· Volume 13· Issue 5
Publisher page

Abstract

The accumulation of plastic microdeformation during cyclic stressing under rolling contact loading conditions results in a complex state of residual stress in the subsurface volume of deep groove ball bearing inner rings. The three-dimensional state of residual stress was analysed experimentally for the first time, employing a combination of methods based on X-ray diffraction. The residual stress field exhibited components of internal stress which were maximal close to the depth at which stresses induced by the external load were at a maximum. From this position the values of the principal components of residual stress decreased with steep gradients towards the surface and to a larger depth. Compressive residual stresses existed in the circumferential and axial directions while in the surface normal direction a tensile residual stress was present. The trends observed by the diffraction analysis were in qualitative agreement with measurements of ring distortion performed upon sectioning.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Metal Alloys Wear and Properties · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. MITTEMEIJER E. J.: in ‘Case-hardened steels: microstructural and residual stress effects’, (ed. Diesburg D. E., ), 161–187; 1984, Warrendale, PA, TMS-AIME; see also: Hiirt.-Tech. Mitt., 1984, 39, 16–29.
2. 10.1007/BF0283308110.1007/BF02833081 ↗
3. 10.1115/1.326107810.1115/1.3261078 ↗
4. General catalogue 4000 SKF 1989.
5. LUNDBERG G., and PALMGREN A.: Acta Polytech. Series d: Mech. Eng., 1947, 1, 1–50.
6. 10.1080/02670836.2020.1209737210.1080/02670836.2020.12097372 ↗
7. YU H. J.: PhD thesis University of Karlsruhe Germany 1977.
8. CHIU Y. P.: J. Solid. Contact Lubr., 1980, 39, 193–208.
9. 10.1016/0043-1648(83)90339-310.1016/0043-1648(83)90339-3 ↗
10. MACHERAUCH E., and MULLER P.: Z. Angew. Phys., 1961, 13, 305–312.
11. DELHEZ R. KEIJSER T. H. DE and MITTEMEUER E. J.: Surf. Eng. 1987 3 331-34/10.1179/sur.1987.3.4.331 ↗
12. 10.1179/03071698080328667610.1179/030716980803286676 ↗
13. HARTMANN U.: PhD thesis University of Karlsruhe Germany 1973.
14. DöLLE H., and HAUK v.: Z. Metallkd., 1977, 68, 725–728.
15. BOLLENRATH F., , HAUK V., , and WEIDEMANN W.: Z. Metallkd., 1967, 58, 643–649.
16. VOSKAMP A. P.: PhD thesis Delft University of Technology 1997 chaps. 8 10.
17. SY A. DE: Met. Progr., 1948, 51, 368–371.
18. ‘Residual stress measurement by X-ray diffraction - SAE J 784a’ SAE handbook supplement Warrendale PA Society of Automotive Engineers 1971.
19. TIMOSHENKO S. P.: ‘Strength of materials’ 3rd edn (reprinted) 210; 1976 Malabar FL Robert E. Krieger Publishing Co.
20. JONES A. B.: Steel, 1946, 119, 68-70, 97–100.
21. 10.1007/BF0259543710.1007/BF02595437 ↗
22. VOSKAMP A. P.: unpublished results.
23. 10.1115/1.343948110.1115/1.3439481 ↗
24. ERLIKH L. B.: Soy. Eng. Res., 1963, 43, 18–22.
25. VOSKAMP A. P., and MITTEMEUER E. J.: Z. Metallkd., 1977, 88, 310–320.