journal article·2013-01

Effect of heat treatment on interface microstructure and bond strength in explosively welded Ti/304L stainless steel clad

M Yadegari, A R Ebrahimi, A Karami

Materials Science and Technology· Volume 29· Issue 1
Publisher page

Abstract

The effects of heat treatment on the microstructure and bond strength at the interface of explosively welded titanium/304L stainless steel clad have been investigated. The microstructure of the clad interface were examined using optical and scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD) techniques. At 700°C, the formation of intermetallic phases σ and Fe2Ti besides β-Ti were confirmed, while in samples, heat treated at 800°C and 900°C, other intermetallic phases such as λ and FeTi, NiTi, NiTi2 phases were detected in addition to σ and Fe2Ti phases. The shear test results show that the shear strengths of heat treated samples are overall significantly lower than that of stress relieved samples. This could be due to the formation of brittle intermetallic phases at the interface. Despite of formation of the intermetallic phase at 700°C, the shear strength of the sample is still more than the minimum standard amount of 137·9 MPa. It is also observed that the higher the heat treatment temperature, the lower the interface shear strength, which can be explained by the fact that the volume fraction of intermetallics increases with increasing temperature. The shear strength values of heat treated samples are lower than those of diffusion bonded clads. This could be attributed to the fact that the total widths of intermetallic layers achieved in heat treated samples are larger than those of for diffusion bonded ones.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering Sahand University of Technology, Tabriz, Iran

References (18)

Show source-provided references
1. Kusaba H, Murakami Y, Kimura K, Izumi D: ‘Titanium and its Application’; 1983, Tokyo, Nikkan Kogyo Shinbunsha Publishers.
2. 10.1016/S0921-5093(03)00298-310.1016/S0921-5093(03)00298-3 ↗
3. 10.1007/s11661-005-0052-010.1007/s11661-005-0052-0 ↗
4. 10.2320/matertrans.45.280510.2320/matertrans.45.2805 ↗
5. 10.1007/BF0321476910.1007/BF03214769 ↗
6. Chiba A, Morizono Y, Nishida M: ‘Titanium science and technology’, 2, 807–814; 2003, Weinheim, Wiley-VCH.
7. 10.1016/1359-6454(95)00200-610.1016/1359-6454(95)00200-6 ↗
8. 10.1016/S1044-5803(02)00306-610.1016/S1044-5803(02)00306-6 ↗
9. 10.1016/j.jnucmat.2003.07.00410.1016/j.jnucmat.2003.07.004 ↗
10. ‘Standard specification for straight-beam ultrasonic examination of plain and clad steel plates for special applications’, A578/578M, ASTM, Philadelphia, PA, USA, 1995.
11. 10.1016/j.msea.2010.04.06510.1016/j.msea.2010.04.065 ↗
12. ‘Standard specification for reactive and refractory metal clad plate’, B898–99, ASTM, Philadelphia, PA, USA, 1999.
13. 10.1016/j.msea.2005.10.04710.1016/j.msea.2005.10.047 ↗
14. 10.1016/j.msea.2007.07.03310.1016/j.msea.2007.07.033 ↗
15. Villars P, Prince A, Okamato H: ‘Handbook of ternary phase alloys’; 1995, Materials Park, OH, ASM International.
16. 10.1007/BF0302780510.1007/BF03027805 ↗
17. 10.1016/S1359-6454(99)00400-010.1016/S1359-6454(99)00400-0 ↗
18. 10.1080/0950711910944682310.1080/09507119109446823 ↗