Sound absorption of open celled aluminium foam fabricated by investment casting method
Source abstract
Abstract
The sound absorption behaviour of an open celled aluminium foam fabricated by investment casting method was examined and correlated with the pore size, sample thickness and backing air gap depth in the present study. The foam shows low sound absorption coefficients at relatively low frequencies or with relatively thin sample thickness due to its 90% or higher open porosity. As frequency or sample thickness increases, the sound absorption is significantly enhanced. Furthermore, if the sample is backed with an air gap, the approximate periodical resonant absorption peaks emerge from the background and shift towards low frequencies with increasing the gap depth. It is also found that the present aluminium foam has even better absorption performance than polyurethane foam, with almost the same pore parameters as the former. The observation on the pore surface and further experiments demonstrate that the difference is attributed to rougher pore surface of the aluminium foam that makes the sound wave loss increase through enhanced friction between the air and the surface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Phenomena Research · Noise Effects and Management · Aerodynamics and Acoustics in Jet Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Materials Physics Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, China
Institute of Acoustics Chinese Academy of Sciences, Beijing 100190, China
References (18)
Show source-provided references
1. Han F · Acust. Acta Acust. · 1998 · 84 · 573
2. 10.1088/0022-3727/36/3/31210.1088/0022-3727/36/3/312 ↗
3. Hakamada M · M. Mabuchi: J. Appl. Phys. · 2006 · 100
4. 10.1121/1.128681210.1121/1.1286812 ↗
5. 10.1016/S0921-5093(04)00966-910.1016/S0921-5093(04)00966-9 ↗
6. 10.1063/1.221610410.1063/1.2216104 ↗
7. ERG Materials, Aerospace: http://www.ergaerospace.com.
8. ‘Acoustics – determination of sound absorption coefficient and impedance in impedance tubes – Part 2: transfer-function method’, BS EN ISO 10534-2, BSI, London, UK, 2001.
9. 10.1063/1.37055010.1063/1.370550 ↗
10. 10.1121/1.38904510.1121/1.389045 ↗
11. 10.1063/1.34948210.1063/1.349482 ↗
12. 10.1016/S0020-7683(98)00091-210.1016/S0020-7683(98)00091-2 ↗
13. 10.1016/S0003-682X(00)00080-310.1016/S0003-682X(00)00080-3 ↗
14. Cummings A · J. Sound Vib. · 1993 · 175 · 11510.1006/jsvi.1994.1315 ↗
15. 10.1007/s11831-008-9022-110.1007/s11831-008-9022-1 ↗
16. 10.1007/s11431-008-0104-y10.1007/s11431-008-0104-y ↗
17. 10.1007/s11431-008-0112-y10.1007/s11431-008-0112-y ↗
18. Bell LH: ‘Industrial noise control’, 199; 1982, New York, Marcel Dekker.