Austenite reversion in low-carbon martensitic stainless steels – a CALPHAD-assisted review
Source abstract
Abstract
Low-carbon martensitic stainless steels with 11.5–16 wt-% Cr and < 0.07 wt-% C are characterised by high corrosion resistance, strength, ductility and impact toughness, obtained by formation of fine-grained reverted austenite from lath martensite upon inter-critical annealing. The review treats the mechanisms governing the formation and stabilisation of reverted austenite and is assisted by the computation of phase equilibria. Literature data on Cr and Ni concentrations of the reverted austenite/martensite dual-phase microstructure are assessed with respect to predicted concentrations. Reasonable agreement was found for concentrations in martensite. Systematic excess of Cr in austenite of approx. 2 wt-% relative to calculations was suspected to originate from the growth of M 23 C 6 with a coherent interface to austenite. Within large scatter, measured values of Ni in austenite were on average 2 wt-% below predictions. Complex equilibration of the microstructure and experimental error are discussed as possible origins of the discrepancies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Danish Hydrocarbon Research and Technology Centre, Technical University of Denmark (DTU), Kongens Lyngby, Denmark
Department of Mechanical Engineering, Technical University of Denmark (DTU), Kongens Lyngby, Denmark
Funding
The Danish Hydrocarbon Research and Technology Centre
References (100+)
Show source-provided references
1. 10.1016/j.matchemphys.2010.02.05810.1016/j.matchemphys.2010.02.058 ↗
2. Niederau HJ. · Zeitschrift des Vereins Dtsch. Ingenieure für Maschinenbau und Met Eig · 1982 · 21 · 801
3. Grounes M · Trans ASM · 1969 · 62 · 902
4. Brezina P · Härterei-Technische Mitteilungen · 1978 · 33 · 1
5. 10.2355/isijinternational.31.72110.2355/isijinternational.31.721 ↗
6. 10.2355/isijinternational.31.143110.2355/isijinternational.31.1431 ↗
7. 10.1016/j.actamat.2014.12.02110.1016/j.actamat.2014.12.021 ↗
8. 10.1016/j.actamat.2013.06.05510.1016/j.actamat.2013.06.055 ↗
9. Irvine KJ · J Iron Steel Inst · 1960 · 193 · 386
10. 10.1179/02670830422501113510.1179/026708304225011135 ↗
11. 10.1179/02670830422501114410.1179/026708304225011144 ↗
12. Kondo K · Steels · 1999 · 1999 · 11
13. Sagara M, Yamada K, Taniyama A, Development for material and application technique of stainless steel line pipes. Nippon Steel & Sumitomometal Technical Report; 2015, p. 59–64.
14. Tvrdy M, Vodarek V, Roznovska G, Production, development and industrial application of 12Cr-6Ni-2.5Mo steels. Supermartensitic Stainless Steels 2002, Brussels; 2002, p. 29–33.
15. Toussaint P, Dufrane J-J. Advances in the making and base material properties of supermartensitic stainless steels (SMSS). Supermartensitic Stainless Steels2002, Brussels, KCI Publishing; 2002, p. 23–27.
16. Marshall AW · Weld World · 2001 · 45 · 19
17. Karlsson L · Svetsaren · 1999 · 54 · 3
18. Baggström G. · Water Power · 1964 · 16 · 516
19. Grounes M. Swedish work on brittle-fracture problems in nuclear reactor pressure vessels. Sweden: AB Atomenergi; 1966. p. 1–34.
20. Grounes M, Lindhagen P. Irradiation effects in pressure vessel materials for steam-cooled fast reactors. Irradiation Effects in Structural Alloys for Thermal and Fast Reactors. ASTM STP 457; 1969, p. 156–179.10.1520/STP41847S ↗
21. 10.1007/BF0108210710.1007/BF01082107 ↗
22. Morley JI. · Iron Steel · 1955 · 28 · 183
23. Kondo K, Ogawa K, Amaya A, Development of weldable super 13Cr martensitic stainless steel for flowline. Proceedings of Twelfth International Offshore and Polar Engineering Conference; Kyushu, Japan; 2002, p. 303–309.
24. Van der Winden H, Toussaint P, Coudreuse L. Past, present and future of weldable supermartensitic alloys. Supermartensitic Stainless Steels 2002, Brussels; 2002, p. 9–13.
25. Kvaale PE, Stein O. Experience with supermartensitic stainless steels in flowline applications. Stainless Steel World Conference; Brussels, Belgium; 1999, p. 19–26.
26. 10.1007/s11661-012-1268-410.1007/s11661-012-1268-4 ↗
27. 10.1016/j.matdes.2016.11.07610.1016/j.matdes.2016.11.076 ↗
28. 10.1016/j.actamat.2014.08.03110.1016/j.actamat.2014.08.031 ↗
29. 10.1016/S0254-0584(01)00460-610.1016/S0254-0584(01)00460-6 ↗
30. 10.4028/www.scientific.net/MSF.879.138110.4028/www.scientific.net/MSF.879.1381 ↗
31. 10.1016/j.matchar.2012.06.00410.1016/j.matchar.2012.06.004 ↗
32. 10.1016/j.msea.2007.01.01610.1016/j.msea.2007.01.016 ↗
33. 10.1007/s11661-015-2811-x10.1007/s11661-015-2811-x ↗
34. 10.1007/BF0264428410.1007/BF02644284 ↗
35. 10.1007/BF0139734610.1007/BF01397346 ↗
36. 10.1103/PhysRevB.73.10411710.1103/PhysRevB.73.104117 ↗
37. 10.1016/j.actamat.2017.05.04410.1016/j.actamat.2017.05.044 ↗
38. Bhadeshia HKDH. · 2001
39. 10.1016/0039-6028(72)90264-610.1016/0039-6028(72)90264-6 ↗
40. Niessen F, Danoix F, Hald J, and Somers MAJ. Structural analysis in atom probe tomography – application to tempering of supermartensitic stainless steel. 7th European Atom Probe Work, 2017, Gullmarsstrand, Sweden; 2017.
41. 10.1016/j.msea.2009.08.02210.1016/j.msea.2009.08.022 ↗
42. Villa M · Metall Mater Trans A · 2017 · 49 · 1
43. 10.1533/9780857096111.1.3410.1533/9780857096111.1.34 ↗
44. 10.1016/j.scriptamat.2012.11.03110.1016/j.scriptamat.2012.11.031 ↗
45. 10.1016/j.msea.2016.11.03910.1016/j.msea.2016.11.039 ↗
46. Speich GR. · Trans Metall Soc AIME · 1969 · 245 · 2553
47. Slunder CJ · 1967
48. Ludwigson DC, Hall AM. The physical metallurgy of precipitation-hardenable stainless steels. DMIC Report 111, Battelle Memorial Institute, Columbus, OH; 1959.
49. Yeli G, Auger MA, Smith GDW, Atom probe tomography (APT) characterization of the sequence of phase nucleation in a 17-4PH steel. Proceedings of International Conference on Solid-Solid Phase Transformations in Inorganic MaterialsInt Conf Solid-Solid Phase Transform Inorg Mater; 2015, p. 167–168.
50. 10.1016/j.actamat.2016.11.05210.1016/j.actamat.2016.11.052 ↗
51. 10.1016/j.matchar.2015.06.04010.1016/j.matchar.2015.06.040 ↗
52. 10.1007/s11661-016-3404-z10.1007/s11661-016-3404-z ↗
53. 10.1016/j.matdes.2011.07.06410.1016/j.matdes.2011.07.064 ↗
54. 10.1016/S1359-6462(01)01093-410.1016/S1359-6462(01)01093-4 ↗
55. 10.1179/02670830322500974210.1179/026708303225009742 ↗
56. 10.2355/isijinternational.51.29910.2355/isijinternational.51.299 ↗
57. 10.1016/j.msea.2010.07.08310.1016/j.msea.2010.07.083 ↗
58. 10.1016/j.matlet.2010.03.02110.1016/j.matlet.2010.03.021 ↗
59. 10.1016/j.jallcom.2012.04.02110.1016/j.jallcom.2012.04.021 ↗
60. 10.1016/S1006-706X(16)30063-210.1016/S1006-706X(16)30063-2 ↗
61. 10.1016/S1359-6454(02)00577-310.1016/S1359-6454(02)00577-3 ↗
62. Niessen F, Grumsen FB, Hald J, Formation and stabilization of reversed austenite in supermartensitic stainless steel. Proceedings of 24th IFHTSE Congress; Nice, France; 2017, p. 138–145.
63. 10.1016/j.msea.2011.01.07810.1016/j.msea.2011.01.078 ↗
64. 10.1016/S1044-5803(00)00099-110.1016/S1044-5803(00)00099-1 ↗
65. 10.1016/j.matdes.2012.04.03610.1016/j.matdes.2012.04.036 ↗
66. 10.1016/j.matchemphys.2013.10.00610.1016/j.matchemphys.2013.10.006 ↗
67. 10.1016/j.matdes.2015.06.14310.1016/j.matdes.2015.06.143 ↗
68. Wang P · Acta Metall Sin · 2008 · 44 · 681
69. 10.1016/j.matdes.2017.11.05510.1016/j.matdes.2017.11.055 ↗
70. 10.1016/j.msea.2013.08.02810.1016/j.msea.2013.08.028 ↗
71. 10.2355/isijinternational.47.152710.2355/isijinternational.47.1527 ↗
72. 10.1016/S1006-706X(13)60099-010.1016/S1006-706X(13)60099-0 ↗
73. 10.1002/srin.20130026410.1002/srin.201300264 ↗
74. Thermo-Calc Software. TCFE6 Steels/Fe-alloys database version 6.2, 2009.
75. 10.1016/j.actamat.2017.07.03610.1016/j.actamat.2017.07.036 ↗
76. 10.1016/S1005-0302(10)60131-410.1016/S1005-0302(10)60131-4 ↗
77. 10.1007/s11661-014-2551-310.1007/s11661-014-2551-3 ↗
78. 10.1016/j.scriptamat.2007.09.01710.1016/j.scriptamat.2007.09.017 ↗
79. 10.1016/j.scriptamat.2008.11.04310.1016/j.scriptamat.2008.11.043 ↗
80. 10.1016/0956-7151(94)90468-510.1016/0956-7151(94)90468-5 ↗
81. Williams DB, Carter CB. 9.3.B Bright-field and dark-field imaging. Transmission Electron Microscopy. Part 1 Basics. 2nd ed. New York: Springer.
82. 10.1016/j.scriptamat.2017.08.02410.1016/j.scriptamat.2017.08.024 ↗
83. 10.1016/j.matdes.2015.05.02610.1016/j.matdes.2015.05.026 ↗
84. 10.1177/030932471140396910.1177/0309324711403969 ↗
85. 10.1016/j.scriptamat.2012.11.00310.1016/j.scriptamat.2012.11.003 ↗
86. 10.1016/j.scriptamat.2010.08.00710.1016/j.scriptamat.2010.08.007 ↗
87. 10.1016/j.msea.2016.03.04810.1016/j.msea.2016.03.048 ↗
88. 10.4028/www.scientific.net/MSF.404-407.48910.4028/www.scientific.net/MSF.404-407.489 ↗
89. 10.1016/j.actamat.2016.02.00110.1016/j.actamat.2016.02.001 ↗
90. 10.1016/j.jallcom.2016.11.04610.1016/j.jallcom.2016.11.046 ↗
91. 10.1016/j.msea.2006.04.10710.1016/j.msea.2006.04.107 ↗
92. Woollin P. Understanding and avoiding intergranular stress corrosion cracking of welded supermartensitic steel. NACE Corrosion Conference Expo (Corrosion 2007); 2007, p. 5379–5394.10.5006/C2007-07094 ↗
93. 10.1016/j.engfailanal.2013.07.02510.1016/j.engfailanal.2013.07.025 ↗
94. 10.1016/S0364-5916(02)00037-810.1016/S0364-5916(02)00037-8 ↗
95. 10.4028/www.scientific.net/SSP.172-174.89910.4028/www.scientific.net/SSP.172-174.899 ↗
96. 10.1361/10549710077034005710.1361/105497100770340057 ↗
97. 10.1016/j.calphad.2014.06.00110.1016/j.calphad.2014.06.001 ↗
98. 10.1016/j.actamat.2006.07.00910.1016/j.actamat.2006.07.009 ↗
99. 10.1016/j.actamat.2008.10.05010.1016/j.actamat.2008.10.050 ↗
100. 10.1016/j.calphad.2003.11.00210.1016/j.calphad.2003.11.002 ↗