Residual stress relief in the aluminium alloy 7075
Source abstract
Abstract
The residual stresses in heat-treated 7075 aluminium alloy blocks have been characterised using two neutron diffraction strain scanning instruments. The influence of uniaxial cold compression on relieving the residual stress has been determined. Systematically increasing the magnitude of cold compression from 1 to 10% has been shown to have a small beneficial effect on the final residual stress distribution, by reducing the magnitude of the range in the triaxial residual stresses. The effect of an overaging precipitation treatment on the residual stress has also been characterised, and this was found to have a significant stress relieving influence (25–40%). A relationship between the width of the {311} diffraction peaks and the amount of cold compression was also observed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical, Aeronautical and Biomedical Engineering, University of Limerick, Limerick, Ireland
Institut Max von Laue – Paul Langevin, Grenoble, France
University of Bristol, Bristol, UK
Materials Science and Simulations, Paul Scherrer Institut, Villigen, Switzerland
References (35)
Show source-provided references
1. Stewart-Jones ET. Forgings in aluminium and magnesium. Proc. Conference on Heat Treatment of Engineering Components; 1969 Dec 17–18; London: Iron and Steel Institute; 1969. p. 83–101.
2. 10.1016/j.matchar.2015.04.01710.1016/j.matchar.2015.04.017 ↗
3. 10.1115/1.282335210.1115/1.2823352 ↗
4. 10.1179/02670830110151008710.1179/026708301101510087 ↗
5. 10.1016/S1359-6462(01)01201-510.1016/S1359-6462(01)01201-5 ↗
6. Myer RT · Metal Progress · 1959 · 3 · 112
7. Kleint RE · Light Met Age · 1958 · 2 · 14
8. Anon · 1997
9. Betteridge W. The relief of internal stresses in aluminum alloys by cold working. Symposium on internal stresses in metals and alloys; 1947 October 15–16; London: Institute of Metals; 1948. p. 171–177.
10. Altschuler Y, Kaatz T, Cina B. Mechanical relaxation of residual stresses. ASTM STP 993; 1988. p. 19–29.10.1520/STP26357S ↗
11. 10.1063/1.169991310.1063/1.1699913 ↗
12. Dieter GE · 1988
13. 10.1016/j.commatsci.2012.11.02410.1016/j.commatsci.2012.11.024 ↗
14. Cullity BD · 2001
15. 10.1088/0022-3727/43/26/26550110.1088/0022-3727/43/26/265501 ↗
16. Dieter GE · 2003 · 64
17. 10.1179/1743284710Y.000000002910.1179/1743284710Y.0000000029 ↗
18. IS0/TTA3. Polycrystalline materials – determination of residual stresses by neutron diffraction. IS0/TTA3, International Standardisation Organisation; 2001.
19. DCIT 21432. Non-destructive testing. Standard test method for determining of residual stresses by neutron diffraction. DD CEN ISO/TS 21432, British Standards Institute; 2005.
20. 10.1107/S002188988100961810.1107/S0021889881009618 ↗
21. Hutchings MT · 2005 · 424
22. 10.1179/02670830110150998010.1179/026708301101509980 ↗
23. Fitzpatrick ME, Fry AT, Holdway P, Determination of residual stresses by X-ray diffraction. Vol. 52. NPL; 2002.
24. Noyan IC · 1987
25. Hauk VM · Adv X-ray Anal · 1983 · 27 · 81
26. Chobaut N, Repper J, Pirling T, Residual stress analysis in AA7449 as-quenched thick plates using neutrons and FE modelling. ICAA13: 13th International Conference on Aluminum Alloys. John Wiley & Sons; 2012. p. 285–291.10.1002/9781118495292.ch44 ↗
27. Zhang H · Heat Treat Met · 2003 · 30 · 61
28. 10.1179/1743284711Y.000000006310.1179/1743284711Y.0000000063 ↗
29. 10.1179/1743284714Y.000000057110.1179/1743284714Y.0000000571 ↗
30. 10.1179/02670830322500193910.1179/026708303225001939 ↗
31. 10.1007/s11661-013-1800-110.1007/s11661-013-1800-1 ↗
32. 10.2172/92207310.2172/922073 ↗
33. 10.2320/matertrans.M201205810.2320/matertrans.M2012058 ↗
34. 10.1016/B978-0-08-034062-3.50027-610.1016/B978-0-08-034062-3.50027-6 ↗
35. 10.1016/1359-6454(95)00171-610.1016/1359-6454(95)00171-6 ↗