Microstructure and precipitation in Al–Li–Cu–Mg–(Mn, Zr) alloys
Source abstract
Abstract
Hot rolled Al–6Li–1Cu–1Mg–0·2Mn (at.-%) (Al–1·6Li–2·2Cu–0·9Mg–0·4Mn, wt-%) and Al–6Li–1Cu–1Mg–0·03Zr (at.-%) (Al–1·6Li–2·3Cu–1Mg–0·1Zr, wt-%) alloys developed for age forming were studied by tensile testing, electron backscatter diffraction (EBSD), three-dimensional atom probe (3DAP), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). For both alloys, DSC analysis shows that ageing at 150°C leads initially to formation of zones/clusters, which are later gradually replaced by S phase. On ageing at 190°C, S phase formation is completed within 12 h. The precipitates identified by 3DAP and TEM can be classified into (a) Li rich clusters containing Cu and Mg, (b) a plate shaped metastable precipitate (similar to GPB2 zones/S″), (c) S phase and (d) δ′ spherical particles rich in Li. The Zr containing alloy also contains β′ (Al3Zr) precipitates and composite β′/δ′ particles. The β′ precipitates reduce recrystallisation and grain growth leading to fine grains and subgrains.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. 10.1007/BF0072798710.1007/BF00727987 ↗
2. 10.1016/S1359-6454(99)00227-X10.1016/S1359-6454(99)00227-X ↗
3. 10.1016/0956-716X(94)90262-310.1016/0956-716X(94)90262-3 ↗
4. 10.1016/0956-7151(91)90033-W10.1016/0956-7151(91)90033-W ↗
5. 10.1016/0956-7151(92)90027-C10.1016/0956-7151(92)90027-C ↗
6. 10.1016/0169-4332(95)00383-510.1016/0169-4332(95)00383-5 ↗
7. 10.1080/0141861870820987510.1080/01418618708209875 ↗
8. Prasad K. S. · Mater. Set Forum · 2000 · 331
9. 10.1179/09506600422501053210.1179/095066004225010532 ↗
10. 10.1016/0169-4332(94)90370-010.1016/0169-4332(94)90370-0 ↗
11. 10.1016/S1359-6454(03)00363-X10.1016/S1359-6454(03)00363-X ↗
12. 10.1016/S1359-6454(99)00228-110.1016/S1359-6454(99)00228-1 ↗
13. 10.1007/978-1-4615-4281-010.1007/978-1-4615-4281-0 ↗
14. 10.1016/S0304-3991(02)00319-410.1016/S0304-3991(02)00319-4 ↗
15. 10.1002/sia.170710.1002/sia.1707 ↗
16. 10.1016/0001-6160(86)90211-710.1016/0001-6160(86)90211-7 ↗
17. De Macedo M. C. · Scripta Mater · 1994 · 31
18. Wang S. C. · Inst. Phys. Conf Ser · 2003 · 179 · 277
19. 10.1016/j.actamat.2004.01.04110.1016/j.actamat.2004.01.041 ↗
20. 10.1016/0001-6160(76)90059-610.1016/0001-6160(76)90059-6 ↗
21. Smith C. S. · Trans. Metall Soc. AIME · 1948 · 175 · 47
22. L. F. Mondolfo: ‘Aluminum: alloys structure and properties’, 1976, London, Butterworth.10.1016/B978-0-408-70932-3.50008-5 ↗
23. 10.1016/0254-0584(90)90075-L10.1016/0254-0584(90)90075-L ↗
24. Kubin L. P. · Ser. Metall · 1992 · 26 · 1423
25. 10.1179/mst.1988.4.8.71310.1179/mst.1988.4.8.713 ↗
26. 10.1016/0036-9748(85)90114-010.1016/0036-9748(85)90114-0 ↗
27. 10.1016/S1359-6454(98)00263-810.1016/S1359-6454(98)00263-8 ↗
28. 10.1080/1478643770823706110.1080/14786437708237061 ↗
29. Pitcher P. D. · Ser. Mater · 1992 · 26 · 511
30. 10.1016/0956-7151(93)90009-H10.1016/0956-7151(93)90009-H ↗
31. Balmuth E. S. · Ser. Mater · 1984 · 18 · 301
32. Papazian J. M. · Ser. Mater · 1986 · 20 · 201
33. 10.2320/matertrans1960.18.67910.2320/matertrans1960.18.679 ↗
34. 10.1016/0001-6160(89)90100-410.1016/0001-6160(89)90100-4 ↗
35. 10.1016/0036-9748(84)90424-110.1016/0036-9748(84)90424-1 ↗
36. 10.1016/0001-6160(69)90067-410.1016/0001-6160(69)90067-4 ↗