journal article·2015-03Open access

Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel

T. L. Burnett, R. Geurts, H. Jazaeri, S. M. Northover, S. A. McDonald, S. J. Haigh, P. J. Bouchard, P. J. Withers

Materials Science and Technology· Volume 31· Issue 5

Abstract

A sample of AISI type 316 stainless steel from a power station steam header, showing reheat cracking, was removed from service and has been examined by a combination of microscale X-ray computed tomography (CT), nanoscale serial section focused ion beam–scanning electron microscopy (FIB-SEM), energy dispersive X-ray (EDX) spectrum imaging and transmission electron microscopy (TEM). Multiscale three-dimensional analysis using correlative tomography allowed key regions to be found and analysed with high resolution techniques. The grain boundary analysed was decorated with micrometre sized, facetted cavities, M23C6 carbides, ferrite and G phase but no σ phase. Smaller intragranular M23C6 particles were also observed, close to the grain boundaries. This intimate coexistence suggests that the secondary phases will control the nucleation and growth of the cavities. Current models of cavitation, based on isolated idealised grain boundary cavities, are oversimplified.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials, University of Manchester, Manchester M13 9PL, UK

FEI Company, Achtseweg Noord 5, Bldg 5651 GG, Eindhoven, The Netherlands

Materials Engineering, The Open University, Walton Hall, Milton Keynes MK7 6AA, UK

BP International Centre for Advanced Materials, School of Materials, University of Manchester, Manchester M13 9PL, UK

References (58)

Show source-provided references
1. Evans RW and Wilshire B: ‘Creep of metals and alloys’; 1985, London, Institute of Metals.
2. ‘R5 assessment procedure for the high temperature response of structures’, Issue 3, Revision 001, EDF Energy Nuclear Generation Ltd, 2012.
3. Gupta C · Mater. Sci. Technol.
4. 10.1016/j.actamat.2008.03.04510.1016/j.actamat.2008.03.045 ↗
5. Lundin CD, Liu P and Cui Y: ‘A literature review on characteristics of high temperature ferritic Cr–Mo steels and weldments’; 2000, New York, Welding Research Council.
6. O'Donnell MP, Bradford RAW, Dean DW, Hamm CD and Chevalier M: ‘Structural integrity of nuclear power plant: high temperature issues in advanced gas cooled reactors (AGR)’, 1; 2013, Abington, EMAS Publishing.
7. Coleman MC, Miller DA and Stevens RA: ‘Reheat cracking and strategies to assure integrity of type 316 weld components’, Proc. Int. Conf. on ‘Integrity of high temperature welds’, PEP Ltd, London, UK, 1998, 169–179.
8. 10.1111/j.1460-2695.1983.tb00329.x10.1111/j.1460-2695.1983.tb00329.x ↗
9. 10.1111/j.1460-2695.2004.00732.x10.1111/j.1460-2695.2004.00732.x ↗
10. 10.1016/j.apsusc.2009.06.08710.1016/j.apsusc.2009.06.087 ↗
11. 10.1179/1743284713Y.000000028510.1179/1743284713Y.0000000285 ↗
12. 10.1016/j.actamat.2003.08.02210.1016/j.actamat.2003.08.022 ↗
13. Jazaeri H · Mater. Sci. Technol.
14. 10.1179/1743280413Y.000000002310.1179/1743280413Y.0000000023 ↗
15. 10.1126/science.110677810.1126/science.1106778 ↗
16. 10.1016/j.msea.2012.12.00210.1016/j.msea.2012.12.002 ↗
17. 10.1016/j.scriptamat.2008.05.00610.1016/j.scriptamat.2008.05.006 ↗
18. 10.1016/j.msea.2007.05.10810.1016/j.msea.2007.05.108 ↗
19. 10.1111/j.1365-2818.2010.03408.x10.1111/j.1365-2818.2010.03408.x ↗
20. 10.1016/j.ultramic.2011.01.01310.1016/j.ultramic.2011.01.013 ↗
21. 10.1038/srep0471110.1038/srep04711 ↗
22. Jazaeri H · Metall. Mater. Trans. A
23. 10.1016/j.matchar.2006.01.01910.1016/j.matchar.2006.01.019 ↗
24. 10.1016/0025-5416(83)90191-X10.1016/0025-5416(83)90191-X ↗
25. 10.1007/BF0264765910.1007/BF02647659 ↗
26. 10.1016/0025-5416(83)90046-010.1016/0025-5416(83)90046-0 ↗
27. 10.1179/02670830110150897210.1179/026708301101508972 ↗
28. 10.1179/imr.1993.38.1.2510.1179/imr.1993.38.1.25 ↗
29. 10.1179/mst.1986.2.8.79510.1179/mst.1986.2.8.795 ↗
30. Hutchings MT: ‘The use of small angle neutron scattering for mapping creep cavitation damage in an ex-service steam header’, OU/MatsEng/025, The Open University, 2012, 1–26.
31. 10.1016/0001-6160(88)90105-810.1016/0001-6160(88)90105-8 ↗
32. 10.1016/0001-6160(67)90400-210.1016/0001-6160(67)90400-2 ↗
33. 10.1016/j.msea.2006.03.00510.1016/j.msea.2006.03.005 ↗
34. 10.1016/j.actamat.2010.10.00310.1016/j.actamat.2010.10.003 ↗
35. 10.1016/j.msea.2007.05.10810.1016/j.msea.2007.05.108 ↗
36. 10.1016/j.commatsci.2012.01.03310.1016/j.commatsci.2012.01.033 ↗
37. Spindler M., private communication.
38. Rustichelli F · Metall. Sci. Technol. · 1993 · 11 · 118
39. 10.1016/0001-6160(67)90159-910.1016/0001-6160(67)90159-9 ↗
40. 10.1016/0001-6160(65)90053-210.1016/0001-6160(65)90053-2 ↗
41. Warren A.D., Flewitt P.E.J. and Scott T.B., private communication.
42. Hull FC · Weld. J. · 1967 · 46
43. Lippold JC · Weld. Res. Suppl. · 1982 · 1 · 388
44. 10.1016/S0921-5093(03)00371-X10.1016/S0921-5093(03)00371-X ↗
45. 10.1179/mst.1991.7.6.53310.1179/mst.1991.7.6.533 ↗
46. 10.1007/BF0027815910.1007/BF00278159 ↗
47. Gill TPS · Weld. Res. Suppl. · 1986 · 123
48. Stewart DA and Spellward P: ‘Transmission electron microscopy investigation of materials originating from Heysham 1 Header 2D22’, M/TE/EXT/REP/0163/00.
49. 10.1016/0001-6160(68)90039-410.1016/0001-6160(68)90039-4 ↗
50. 10.1016/0036-9748(79)90282-510.1016/0036-9748(79)90282-5 ↗
51. 10.1179/mst.1988.4.1.510.1179/mst.1988.4.1.5 ↗
52. 10.5402/2012/73247110.5402/2012/732471 ↗
53. 10.1016/j.scriptamat.2006.02.04510.1016/j.scriptamat.2006.02.045 ↗
54. 10.1016/j.msea.2005.08.22310.1016/j.msea.2005.08.223 ↗
55. 10.1023/A:102298900217910.1023/A:1022989002179 ↗
56. 10.1016/j.ijplas.2009.10.00910.1016/j.ijplas.2009.10.009 ↗
57. 10.1016/j.msea.2007.10.09510.1016/j.msea.2007.10.095 ↗
58. 10.1179/174329305X2951910.1179/174329305X29519 ↗