Effect of preweld microstructure on HAZ liquation cracking of Rene 80 superalloy
Source abstract
Abstract
The objective of this work was to study the microstructure of as cast, solution treated and overaged Rene 80 superalloy before and after welding treatment. Studies focused on identifying heat affected zone (HAZ) liquation cracking mechanism and the effect of preweld microstructure on it. The formation of HAZ liquation cracking or microfissuring is found to be strongly dependent on constitutional liquation of grain boundary precipitates. These liquated precipitates in the as cast state contain MC carbides and particularly γ/ γ‘ eutectic islands. While in the overaged condition they consist of the MC carbides and borides. Also HAZ grain boundary liquation and subsequent resolidification occur in overaged Rene 80 during welding. MC carbide liquation can be observed at the weldment of solution treated Rene 80 but the intensity of this liquation is not enough for liquid film formation and then cracking. X-ray mapping of MC carbide forming elements, give further evidence on the liquid film formation at hot cracking regions. It shows the enrichment from tungsten and lower amounts of molybdenum and titanium.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. 10.1179/mst.1985.1.8.61310.1179/mst.1985.1.8.613 ↗
2. 10.1080/0950711910944681510.1080/09507119109446815 ↗
3. Donachie M. J., and Donachie S. J. ‘Superalloys: a technical guide’, 153-160; 2002, Materials Park, OH, ASM International.10.31399/asm.tb.stg2.9781627082679 ↗
4. Staif S., Savchenko V. S., and Yoshchenko K. A.: Proc. Conf. on ‘Joining and repair of gas turbine components’, Indianapolis, IN, USA, September 1997, ASM International,7–10.
5. 10.1179/02670830222500163310.1179/026708302225001633 ↗
6. 10.1179/02670830222500203810.1179/026708302225002038 ↗
7. 10.1179/02670830222500204710.1179/026708302225002047 ↗
8. 10.1179/02670830422501994810.1179/026708304225019948 ↗
9. 10.1016/j.scriptamat.2003.11.02510.1016/j.scriptamat.2003.11.025 ↗
10. Duvall D. S. · Weld J. · 1967 · 46 · 423s
11. Duvall D. S., and Sulivan C. P.: Weld. I, 1966, 45, 145s-155s.
12. Pepe J. J., and Savage W. F.: Weld. I, 1967, 46, 411s-422s.
13. 10.1007/BF0266820910.1007/BF02668209 ↗
14. Thompson E. G. · Weld. J · 1969 · 48 · 70s
15. Baslack W. A. · Weld J. · 1988 · 67 · 77s
16. Baslack W. A. · Weld. J. · 1989 · 68 · 418s
17. 10.1016/0956-7151(93)90218-H10.1016/0956-7151(93)90218-H ↗
18. Richards N. L. · Metall Trans. A · 1993 · 24 · 116910.1007/BF02657248 ↗
19. 10.1016/0956-716X(90)90197-O10.1016/0956-716X(90)90197-O ↗
20. Mayo D. E. · Metall Trans. A · 1991 · 22 · 557
21. Savage W. F. · Weld J. · 1966 · 45 · 13s
22. Richrds N. L. · Metall Mater. Trans. A · 1996 · 27 · 78510.1007/BF02648966 ↗
23. Chaturvedi M. C. · Metall Mater. Trans. A · 2001 · 32 · 93110.1007/s11661-001-0350-0 ↗
24. Richards N. L. · Metall. Mater. Trans. A · 2002 · 33 · 200510.1007/s11661-002-0033-5 ↗
25. Lippold J. C. · Weld J. · 1969 · 48 · 70s
26. Baslack W. A. · Weld. I · 1992 · 71
27. Thompson R. G. · Weld J. · 1983 · 62 · 337s
28. Koopman M., and King B.: Proc. Int. Symp. on ‘The metallurgy and application of superalloys 718 and 625’, 35-70; 1991, Pittsburgh, PA, TMS.
29. 10.1007/BF0265899910.1007/BF02658999 ↗
30. Spear K. E. ‘Application of phase diagrams in metallurgy and ceramics’, NBS Special Publiucation 496,Vol. 2, 744-762; 1978, Washington DC, NBS.
31. Lancaster J. F. ‘Welding metallurgy’, 5nd edn, Sec. 7-9-2; 1993, London, Chapman & Hall.