High velocity compaction compared with conventional compaction
Source abstract
Abstract
Compaction to full density is a means to deliver performance and precision without the distortion associated with sintering densification. High strain rate compaction using shock waves has been demonstrated as one means to attain full density in the green state. In the present study, variations in the compaction pressure are used to determine the conditions for attaining full density and these conditions are compared between high velocity and traditional die compaction technologies. A diminishing effect of compaction pressure on densification was observed. At the same compaction pressure the green density and hardness were lower using high velocity compaction. Sound velocity measurements in the powder show high velocity compaction did not generate a shock wave. Therefore, under subcritical compaction velocity conditions there is a higher green density from conventional compaction when compared using the same peak pressure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Sawaoka A. B., and Horie Y.: in ‘Shock wave and high strain rate phenomena in materials’ (ed.Meyers M. A. et al), 323-338; 1992, New York, Marcel Dekker.
2. Vityaz P. A., and Roman O. V.: Proc. 13th Int. Conf. on ‘Machine tool design research’, Birmingham University, 441-447; 1972, London, Macmillan Press.10.1007/978-1-349-01857-4_63 ↗
3. Sethi G. · 2004
4. Smugeresky J. E., and Gourdin W. H.: in ‘Metallurgical applica-tions of shock wave and high-strain-rate phenomena’, 107–128; 1986, New York, Marcel Dekker.
5. 10.1007/BF0119889010.1007/BF01198890 ↗
6. Anonymous : Metal Powder Rep., 2002, Sept., 57, 26.10.1016/S0026-0657(02)80103-5 ↗
7. Skoglund P. · Powder Metall · 2001 · 44 · 199
8. 10.1016/S0032-5910(02)00111-010.1016/S0032-5910(02)00111-0 ↗
9. 10.1063/1.34849310.1063/1.348493 ↗
10. 10.1179/pom.1996.39.4.27510.1179/pom.1996.39.4.275 ↗
11. Raybould D.: Proc. 15th Int. Conf. on ‘Machine tool design and research’, 627; 1974, Birmingham, Halsted Press, John Wiley.
12. Rusnak R. M. · Int. J. Powder Metall Powder Technol · 1976 · 12 · 91
13. Sano Y. · Int. J. Powder Metall Powder Technol · 1977 · 13 · 81
14. 10.1007/BF0054045110.1007/BF00540451 ↗
15. Kathrina T. · Brit. Ceram. Trans · 1996 · 95 · 233
16. Dawson A., Pelletier S., and Bussière J.: in ‘Advances in powder metallurgy and particulate materials’,Vol. 2, 7.303-7.313; 1996, Princeton, NJ, MPIF.
17. Dawson A., and Bussière J.: in ‘Advances of powder metallurgy and particulate materials’,Vol. 3, 16.67-16.81; 1997, Princeton, NJ, MPIF.
18. Anonymous: ‘Iron and steel powders for sintered components’, Hi · 5gands AB · 2002
19. Bauccio M. L. ‘ASM metals reference book’, 3rd edn; 1993, Materials Park, OH, ASM International.