journal article·1999-05

Influence of molybdenum on austempering behaviour of ductile iron Part 1 – Austempering kinetics and mechanical properties of ductile iron containing 0·13%Mo

S. Yazdani, R. Elliott

Materials Science and Technology· Volume 15· Issue 5
Publisher page

Abstract

Measurements of the austempering kinetics and mechanical properties are presented for a ductile iron of composition Fe–3·51C– 2·81Si–0·25Mn–0·39Cu–0·13Mo–0·04Mg (wt-%) for austempering temperatures of 285, 320, 375, and 400°C after austenitising at 870°C for 120 min. The kinetic studies show that the alloying level is insufficient to cause a significant delay in ausferrite formation in the intercellular boundaries. This implies that the heat treatment processing window is open for all austempering conditions studied. The mechanical property measurements show that with the correct selection of austempering temperature all the grades of the ASTM Standard 897M : 1990 and BS EN 1564 : 1997 can be satisfied. The hardenability of the present iron is limited and it is therefore unlikely that these standards will be achieved in thicker section components.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Manchester Materials Science Centre, University of Manchester, Grosvenor Street, Manchester, M1 7HS, UK

References (22)

Show source-provided references
1. 10.1179/mst.1995.11.2.11810.1179/mst.1995.11.2.118 ↗
2. 10.1179/mst.1995.11.3.28410.1179/mst.1995.11.3.284 ↗
3. 10.1179/mst.1995.11.8.77610.1179/mst.1995.11.8.776 ↗
4. 10.1179/mst.1995.11.9.90810.1179/mst.1995.11.9.908 ↗
5. 10.1080/02670836.1996.1166571710.1080/02670836.1996.11665717 ↗
6. 10.1080/02670836.1996.1166571710.1080/02670836.1996.11665717 ↗
7. 10.1080/02670836.1996.1166571710.1080/02670836.1996.11665717 ↗
8. 10.1179/mst.1997.13.1.2410.1179/mst.1997.13.1.24 ↗
9. 10.1080/13640461.1997.1181967110.1080/13640461.1997.11819671 ↗
10. MOORE D. J. ROUNS T. N. and RUNDMAN K. B.: AFS Trans. 1986 94 255.
11. MOORE D. J. ROUNS T. N. and RUNDMAN K. B.: AFS Trans. 1985 93 705.
12. ‘Annual book of ASTM standards’ Vol. 03.01 753; 1990 Philadelphia PA ASTM.
13. ‘Annual book of ASTM standards’ Vol. 03.01 583; 1990 Philadelphia PA ASTM.
14. ELLIOTT R.: Heat Treat. Met., 1997, 3, 55.
15. 10.1023/A:101868711573210.1023/A:1018687115732 ↗
16. BAYATI H.PhD thesis University of Manchester UK 1997.
17. LIO Y. C., , SCHISSLER J. M., , CHABAUT J. P., , and VETTERS H.: Metall. Sci. Technol., 1995, 13, 12.
18. MASSONE J. M. BOERI R. E. and SIKORA J. A.: AFS Trans. 1996 104 133.
19. 10.1007/BF0267060010.1007/BF02670600 ↗
20. BAYATI H. and ELLIOTT R.: Proc. Conf. on ‘Solidification processing’ Sheffield UK July 1997 University of Sheffield 325.
21. NEUMANN F.: ‘Recent research in cast iron’ (ed. Merchant H. D.) 659; 1965 Reading UK Gordon and Breach.
22. VOIGT R. C. and LOPER C. R.Jr: Proc. 1st Int. Conf. on Austempered ductile iron’ 83; 1984 Metals Park OH American Society for Metals.