journal article·2011-05

The hot ductility of Nb/V containing high Al, TWIP steels

S E Kang, A Tuling, I Lau, J R Banerjee, B Mintz

Materials Science and Technology· Volume 27· Issue 5
Publisher page

Abstract

The hot ductility of Nb/V containing high Al, twin induced plasticity (TWIP) steels has been examined over the temperature range 650–1150°C after melting and after ‘solution treatment’. Previous work had shown that the hot ductility is poor for the 1·5 mass-Al, TWIP steel due to precipitation of AlN at the austenite grain boundaries, the depth of the trough being similar to that for an X65 grade pipeline steel but with the trough covering a much wider temperature range. Adding Nb and V made the ductility even worse due to the additional precipitation of NbCN and VN. Very low reduction of area values, 10–20 were obtained in the temperature range 700–900°C. Increasing the cooling rate to the test temperature resulted in even worse ductility. The ductility of these steels after ‘solution treatment’ is similar to that obtained after melting but when the cast was hot rolled followed by ‘solution treatment’ and cooling to the test temperature ductility improved due to grain refinement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

POSCO Technical Research Labs, Pohang, Korea

Industrial Metals and Mineral Research Institute University of Pretoria, Pretoria, South Africa

City UniversityLondon, UK

References (16)

Show source-provided references
1. 10.1179/09506600177104875410.1179/095066001771048754 ↗
2. Kang SE, Tuling A, Mintz B: ‘The hot ductility of Al containing TRIP steels melted in situ’, Proc. Conf. AISTech. 2008, Pittsburgh, PA, USA, May 2008, AIS.
3. Kim S-K, Cho J-W, Kwok W-J, Kim G: ‘Development of TWIP steel for automotive applications’, Proc. 3rd Int. Steel Conf. on ‘New development in metallurgical process technologies’, Dusseldorf, Germany, June 2007, METEC, 690–697.
4. ‘Manufacturing process for austenitic high manganese steel having superior formability, strengths and weldability’, POSCO, US patent no. 5431753, 1995
5. 10.1007/BF0264833910.1007/BF02648339 ↗
6. 10.2355/isijinternational.43.43810.2355/isijinternational.43.438 ↗
7. Vodopivec V · J. Mater. Sci. · 1975 · 1084
8. Cardost GI · Ironmaking Steelmaking · 1995 · 22 · 365
9. 10.1179/174328407X17973710.1179/174328407X179737 ↗
10. Kang SE
11. 10.1179/imr.1991.36.1.18710.1179/imr.1991.36.1.187 ↗
12. Mintz B · Ironmaking Steelmaking · 1993 · 20 · 445
13. 10.1179/02670830110150966510.1179/026708301101509665 ↗
14. Factsage Program
15. 10.2355/isijinternational.39.83310.2355/isijinternational.39.833 ↗
16. 10.1179/mst.1998.14.3.22710.1179/mst.1998.14.3.227 ↗