journal article·2011-10

Fabrication–microstructure–performance relationships of reversible solid oxide fuel cell electrodes–review

S Gamble

Materials Science and Technology· Volume 27· Issue 10
Publisher page

Abstract

A reversible solid oxide fuel cell system can act as an energy storage device by storing energy in the form of hydrogen and heat, buffering intermittent supplies of renewable electricity such as tidal and wave generation. The most widely used electrodes for the cell are lanthanum strontium manganate–yttria stabilised zirconia and Ni–yttria stabilised zirconia. Their microstructure depends on the fabrication techniques, and determines their performance. The concept and efficiency of reversible solid oxide fuel cells are explained, along with cell geometry and microstructure. Electrode fabrication techniques such as screen printing, dip coating and extrusion are compared according to their advantages and disadvantages, and fuel cell system commercialisation is discussed. Modern techniques used to evaluate microstructure such as three-dimensional computer reconstruction from dual beam focused ion beam–scanning electron microscopy or X-ray computed tomography, and computer modelling are compared. Reversible cell electrode performance is measured using alternating current impedance on symmetrical and three electrode cells, and current/voltage curves on whole cells. Fuel cells and electrolysis cells have been studied extensively, but more work needs to be done to achieve a high performance, durable reversible cell and commercialise a system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Chemistry, University of St Andrews, Purdie Building, North Haugh, St Andrews, Fife KY16 9ST, UK

References (72)

Show source-provided references
1. Stern N: ‘Stern review on the economics of climate change’, Report, 1st edn, HM Treasury, London, UK, 2006.10.1017/CBO9780511817434 ↗
2. 10.1016/j.jpowsour.2007.02.07310.1016/j.jpowsour.2007.02.073 ↗
3. Goettler R: ‘Review of the Rolls-Royce SOFC technology and SECA program’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July2009, Rolls-Royce Fuel Cell Systems (US) Inc., US DOE.
4. Vora SD: ‘SECA program review’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July2009, Siemens, US DOE.
5. 10.1016/S0955-2219(02)00447-810.1016/S0955-2219(02)00447-8 ↗
6. 10.1007/s10853-008-2966-610.1007/s10853-008-2966-6 ↗
7. 10.1016/j.jpowsour.2007.06.08610.1016/j.jpowsour.2007.06.086 ↗
8. 10.1039/b600532b10.1039/b600532b ↗
9. 10.1016/j.electacta.2008.08.03710.1016/j.electacta.2008.08.037 ↗
10. 10.1149/1.136020310.1149/1.1360203 ↗
11. 10.1149/1.320464710.1149/1.3204647 ↗
12. 10.1016/j.ssi.2009.02.03010.1016/j.ssi.2009.02.030 ↗
13. 10.1149/1.161250510.1149/1.1612505 ↗
14. 10.1016/j.jpowsour.2009.02.05110.1016/j.jpowsour.2009.02.051 ↗
15. 10.1016/S0167-2738(00)00818-310.1016/S0167-2738(00)00818-3 ↗
16. 10.1007/s10008-008-0752-710.1007/s10008-008-0752-7 ↗
17. 10.1016/j.ssi.2008.03.02210.1016/j.ssi.2008.03.022 ↗
18. 10.1149/1.176813110.1149/1.1768131 ↗
19. 10.1016/j.ssi.2009.01.00410.1016/j.ssi.2009.01.004 ↗
20. 10.1016/j.matlet.2007.09.03710.1016/j.matlet.2007.09.037 ↗
21. 10.1016/j.jpowsour.2004.05.02810.1016/j.jpowsour.2004.05.028 ↗
22. 10.1016/j.ceramint.2009.01.00810.1016/j.ceramint.2009.01.008 ↗
23. 10.1007/s11666-008-9287-910.1007/s11666-008-9287-9 ↗
24. 10.1016/j.jpowsour.2008.06.02110.1016/j.jpowsour.2008.06.021 ↗
25. Bessette N: ‘Status of the Acumentrics SOFC program’, Proc. SECA Annual Workshop, Pacific Grove, CA, USA, April2005, Acumentrics Corp., US DOE.
26. Liktal T: ‘Ceramic/metallic heat exchanger development’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July2009, Acumentrics Corp., US DOE.
27. Fergus J, Hui R, Li X, Wilkinson DP, Zhang (eds) J: ‘Solid oxide fuel cells: materials properties and performance’, 1st edn; 2008, Boca Raton, FL, CRC Press, Inc. Taylor and Francis Group.
28. 10.1016/j.jpowsour.2003.11.07710.1016/j.jpowsour.2003.11.077 ↗
29. Kerr R: ‘Delphi SOFC stack development update’, Proc. 2009 SECA Annual Review Meet., Pittsburgh , PA, USA, August 2009, Delphi, US DOE.
30. Mulot J, Niethammer M, Mukerjee S, Haltiner K, Shaffer S: ‘Development update on Delphi’s solid oxide fuel cell systems’, Proc. Fundamentals and Developments of Fuel Cells Conf., Nancy, France, December2008, Electrochemical Society.
31. 10.1016/S0167-2738(02)00344-210.1016/S0167-2738(02)00344-2 ↗
32. 10.1007/s10832-008-9458-610.1007/s10832-008-9458-6 ↗
33. Borglum B: ‘Cell and stack development at versa power systems’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July 2009, Versa Power Systems, US DOE.
34. Devoe A, Devoe L: ‘A fuel cell technology breakthrough, the SOFC stick’, Technical report, Violet Fuel Cell Sticks, 7173 Construction Court, San Diego, CA, USA, February 2008.
35. 10.1002/adma.20080242810.1002/adma.200802428 ↗
36. 10.1149/1.234558310.1149/1.2345583 ↗
37. 10.1149/1.243420310.1149/1.2434203 ↗
38. 10.1016/j.jpowsour.2009.08.03410.1016/j.jpowsour.2009.08.034 ↗
39. 10.1016/j.elecom.2006.11.01210.1016/j.elecom.2006.11.012 ↗
40. 10.1016/j.ijhydene.2009.06.04210.1016/j.ijhydene.2009.06.042 ↗
41. 10.1016/j.pmatsci.2006.07.00110.1016/j.pmatsci.2006.07.001 ↗
42. 10.1179/095066010X1277720587567910.1179/095066010X12777205875679 ↗
43. 10.1016/j.ssi.2007.12.07510.1016/j.ssi.2007.12.075 ↗
44. 10.1016/j.jpowsour.2003.11.02310.1016/j.jpowsour.2003.11.023 ↗
45. 10.1038/nmat166810.1038/nmat1668 ↗
46. 10.1016/j.elecom.2009.03.01010.1016/j.elecom.2009.03.010 ↗
47. 10.1016/j.ces.2009.05.03810.1016/j.ces.2009.05.038 ↗
48. 10.1016/j.ssi.2008.10.01710.1016/j.ssi.2008.10.017 ↗
49. 10.1149/1.279467210.1149/1.2794672 ↗
50. 10.1149/1.282884510.1149/1.2828845 ↗
51. 10.1149/1.289506710.1149/1.2895067 ↗
52. 10.1016/j.jeurceramsoc.2010.02.00410.1016/j.jeurceramsoc.2010.02.004 ↗
53. 10.1016/j.ssi.2005.03.01010.1016/j.ssi.2005.03.010 ↗
54. Lanzini A · Apr · 2009 · 194 · 408
55. 10.1016/j.jpowsour.2009.04.03110.1016/j.jpowsour.2009.04.031 ↗
56. 10.1016/j.electacta.2007.05.07110.1016/j.electacta.2007.05.071 ↗
57. Eg&G Technical Services, Inc: ‘Fuel cell handbook’, 7th edn; 2004, Morgantown, WV, US Department of Energy, National Energy Technology Laboratory.
58. 10.1016/j.ssi.2003.08.00610.1016/j.ssi.2003.08.006 ↗
59. 10.1016/j.jpowsour.2008.12.13210.1016/j.jpowsour.2008.12.132 ↗
60. 10.1149/1.221656210.1149/1.2216562 ↗
61. 10.1007/s10800-008-9672-610.1007/s10800-008-9672-6 ↗
62. 10.1002/fuce.20080019210.1002/fuce.200800192 ↗
63. 10.1149/1.278377110.1149/1.2783771 ↗
64. 10.1149/1.204822810.1149/1.2048228 ↗
65. Sarantaridis D · Jan · 2008 · 155 · B467
66. 10.1016/j.ssi.2005.06.01410.1016/j.ssi.2005.06.014 ↗
67. 10.1016/j.ijhydene.2008.07.06110.1016/j.ijhydene.2008.07.061 ↗
68. 10.1016/j.jpowsour.2008.10.05310.1016/j.jpowsour.2008.10.053 ↗
69. An CM · Aug · 2010 · 195 · 821
70. 10.1016/j.jpowsour.2006.09.02410.1016/j.jpowsour.2006.09.024 ↗
71. Hauch A · Jan · 2008 · 18 · 2331
72. Mogensen M · 2006