journal article·2000-11

Mechanically alloyed metals

H.K.D.H. Bhadeshia

Materials Science and Technology· Volume 16· Issue 11-12
Publisher page

Abstract

Mechanical alloying involves the severe deformation of mixtures of powders until they form the most intimate of atomic solutions. Inert oxides can also be introduced to form a uniform dispersion of fine particles which strengthen the consolidated product. Large quantities of iron and nickel base alloys with unusual properties are produced commercially using this process. The theory describing the way in which the powders evolve into a solution is reviewed. There are some fundamental constraints which dictate how the microstructure must change during mechanical alloying for the process to be at all viable. The strange recrystallisation behaviour of the alloys can be understood if it is assumed that unlike normal metals, the grains in the mechanically alloyed sample are not topologically independent. Another topic discussed is the mechanical blending of microstructures containing different phases, both with and without a net reduction in free energy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and MetallurgyUniversity of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK

References (31)

Show source-provided references
1. 10.1007/BF0303783510.1007/BF03037835 ↗
2. BENJAMIN J. S. and GILMAN P. S.: ‘Metals handbook’ 9th edn 722; 1983 Materials Park OH ASM International.
3. GESSINGER G. H.: ‘Powder metallurgy of superalloys’; 1984 Sevenoaks Butterworths.
4. HACK G. A. J.: Powder Metall. 1984 27 73–79.10.1179/pom.1984.27.2.73 ↗
5. REGLE H.: ‘Alliages ferritiques 14/20% de chrome renforces par dispersion d'oxydes’ PhD thesis Université de Paris-Sud 1994.
6. KRAUTWASSER P., , CZYRSKA-FILEMONOWIC A., , WIDERA M., , and CARSUGHI F.: Mater. Sci. Eng. A, 1994, A177,199–208.
7. JAEGER D. M. and JONES A. R.: ‘Materials for combined cycle power plant’ Sheffield UK June 1991 The Institute of Materials 1–11.
8. BHADESHIA H. K. D. H.: Mater. Sci. Eng. A, 1997, A223,64–77.
9. 10.1016/0956-716X(91)90512-Y10.1016/0956-716X(91)90512-Y ↗
10. BHADESHIA H. K. D. H.: Mater. Sci Forum, 1998,284-286,39–50.
11. CHOU T. S. BHADESHIA H. K. D. H. MCCOLVIN G. and ELLIOTT I. C.: ‘Mechanical alloying for structural applications’ 77–82; 1993 Materials Park OH ASM International.
12. LANDAU L. D. and LIFSHITZ E. M.: ‘Statistical physics’ 344; 1958 London Pergamon.
13. 10.1007/BF0266263310.1007/BF02662633 ↗
14. MILLER M. K.: ‘Phase transformations ‘87’ (ed. Lorimer G. W.) 39-43; 1988 London The Institute of Metals.
15. UEMORI R. MUKAI T. and TANINO M.: ‘Phase transformations ‘87’ (ed. Lorimer G. W.) 44-46; 1988 London The Institute of Materials.
16. 10.1007/s11661-997-0176-510.1007/s11661-997-0176-5 ↗
17. 10.1007/BF0266544710.1007/BF02665447 ↗
18. 10.1179/mst.1993.9.10.89010.1179/mst.1993.9.10.890 ↗
19. CHOU T. S., and BHADESHIA H. K. D. H.: Mater. Sci. Eng. A, 1994, A189,229–233.
20. 10.1007/BF0265723510.1007/BF02657235 ↗
21. NAKAGAWA Y. G. TERASHIMA H. and MINO K.: ‘Superalloys 1988’ (ed. S. Reichman etal.) 81-89; 1988 Warrendale PA TMS-AIME.10.7449/1988/Superalloys_1988_81_89 ↗
22. 10.1007/BF0264692010.1007/BF02646920 ↗
23. 10.1007/BF0267192710.1007/BF02671927 ↗
24. MINO K., , HARADA H., , BHADESHIA H. K. D. H., , and YAMAZAKI M.: Mater. Sci Forum, 1992, 88-90,213–220.
25. JONGENBURGER P.: ‘ODS superalloys for gas turbines’ PhD thesis no. 773 Ecole Polytechnique Federale de Lausanne Switzerland 1988.
26. REGLE H., and ALAMO A.: J. Phys. (France) IV, 1993, C7, (3),727–730.
27. MURAKAMI K.: ‘Directional recrystallisation in mechanically alloyed ODS nickel based superalloys’, PhD thesis, University of Cambridge, UK, 1993.
28. 10.1016/S0921-5093(96)10489-510.1016/S0921-5093(96)10489-5 ↗
29. Kobelco Technol. Rev. 1990 (8).
30. 10.1016/0169-4332(93)90334-810.1016/0169-4332(93)90334-8 ↗
31. 10.1016/0025-5416(84)90180-010.1016/0025-5416(84)90180-0 ↗