journal article·2005-07

Microstructural instability of a welded joint in P91 steel during creep at 600°C

M. E. Abd El-Azim, A. M. Nasreldin, G. Zies, A. Klenk

Materials Science and Technology· Volume 21· Issue 7
Publisher page

Abstract

The martensitic 10CrMoVNb 91 (P91) steel has been developed for applications under high ultra supercritical pressure for steam power plants. The creep rupture strength of welded joints of this steel is limited by the fine grained region of its heat affected zone (HAZ). The microstructural changes occurring in this region during long term creep tests at 600°C and 70 MPa were examined using optical microscopy and scanning and transmission electron microscopy for comparison with the microstructure of this region after post-weld heat treatment. The factors which result in the reduction of creep rupture strength of the fine grained region of HAZ are discussed. It was found that the most effective factors reducing the creep rupture strength of the fine grained region of the HAZ of a welded joint in P91 steel, in comparison with the coarse grained region of the HAZ and the base metal of the welded joint, are the finer prior austenite grain size of the fine grained region, which accelerates the rate of growth of martensite lath subgrains and enhances creep cavitation, and also the lower peak temperature during welding, which results in a softer martensite matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Y. Hasegawa, M. Ohgami and Y. Okamura: in ‘Advanced heat resistant steel for power generation’, (ed. R. Viswanathan and J. Nutting), 655; 1999, Cambridge, UK, The University Press.
2. A. Di Gianferancesco, O. Tassa, S. Matera and G. Cumino: in ‘Advanced heat resistant steel for Power generation’, (ed. R. Viswanathan and J. Nutting), 622, 1999, Cambridge, Cambridge University Press.
3. S. Spigarelli, E. Cerri, E. Evavngelista and P. Bontempi: ‘Advanced heat resistant steel for power generation’, 247; 1999, Cambridge, Cambridge University Press.
4. Bendick W. · Steel Res · 1996 · 67 · 38210.1002/srin.199605505 ↗
5. 10.1016/0001-6160(89)90265-410.1016/0001-6160(89)90265-4 ↗
6. 10.1016/S1359-6454(97)00176-610.1016/S1359-6454(97)00176-6 ↗
7. 10.1007/BF0280116410.1007/BF02801164 ↗
8. H. Cerjak and E. Letofsky: in ‘Advanced heat resistant steel for power generation’, 611; 1999, Cambridge, Cambridge University Press.
9. 10.1179/stw.2001.6.6.40510.1179/stw.2001.6.6.405 ↗
10. 10.1179/13621710422501716110.1179/136217104225017161 ↗
11. 10.1016/0956-716X(91)90301-G10.1016/0956-716X(91)90301-G ↗
12. 10.1179/mst.1996.12.7.55210.1179/mst.1996.12.7.552 ↗
13. G. Krauss: ‘Steels: heat treatment and processing principles’, 218; 1989, Materials Park, OH, ASM International.
14. 10.1179/02670830010150699310.1179/026708300101506993 ↗