journal article·2013-01

Effects of extrusion ratio on microstructure, mechanical and corrosion properties of biodegradable Mg–Nd–Zn–Zr alloy

X B Zhang, G Y Yuan, Z Z Wang

Materials Science and Technology· Volume 29· Issue 1
Publisher page

Abstract

The Mg–3·08Nd–0·27Zn–0·46Zr (wt-%) alloy was hot extruded with different extrusion ratios to refine microstructure and to optimise mechanical properties and corrosion resistance as a biodegradable magnesium alloy. The microstructure was observed by optical microscopy, the mechanical properties were tested at room temperature and the corrosion resistance was evaluated in Hanks’ solution. The results show that the microstructure becomes more and more homogeneous with increasing the extrusion ratio. The mechanical properties of the as extruded alloy are much better than those of the as cast one. Higher strength is obtained with the extrusion ratio of 18, and better elongation is obtained with the extrusion ratio of 25. Corrosion results show that corrosion resistance of the as extruded alloy immersed in Hanks’ solution is better than that of the as cast one, and higher extrusion ratio results in better corrosion resistance. Both the as cast and the as extruded alloys exhibit uniform corrosion, which was interpreted by cyclic polarisation test.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering Nanjing Institute of Technology, Nanjing 211167, China

National Engineering Research Center of Light Alloy Net Forming Shanghai Jiao Tong University, Shanghai 200240, China

References (24)

Show source-provided references
1. 10.1016/j.biomaterials.2005.10.00310.1016/j.biomaterials.2005.10.003 ↗
2. 10.1016/S0098-2997(02)00089-410.1016/S0098-2997(02)00089-4 ↗
3. 10.4028/www.scientific.net/KEM.254-256.44710.4028/www.scientific.net/KEM.254-256.447 ↗
4. 10.1007/s10856-009-3954-310.1007/s10856-009-3954-3 ↗
5. 10.1016/j.corsci.2009.09.03310.1016/j.corsci.2009.09.033 ↗
6. 10.1002/maco.20100595810.1002/maco.201005958 ↗
7. 10.1016/j.matdes.2010.12.05410.1016/j.matdes.2010.12.054 ↗
8. 10.1016/j.jallcom.2011.04.12510.1016/j.jallcom.2011.04.125 ↗
9. 10.1016/j.actbio.2009.11.00410.1016/j.actbio.2009.11.004 ↗
10. 10.1016/j.msec.2010.08.01910.1016/j.msec.2010.08.019 ↗
11. 10.1016/j.actbio.2010.11.03410.1016/j.actbio.2010.11.034 ↗
12. 10.1016/j.actbio.2009.10.00610.1016/j.actbio.2009.10.006 ↗
13. 10.1016/j.actbio.2009.04.04110.1016/j.actbio.2009.04.041 ↗
14. 10.1016/j.corsci.2008.03.00310.1016/j.corsci.2008.03.003 ↗
15. 10.1002/adem.20080004610.1002/adem.200800046 ↗
16. 10.1016/j.matlet.2011.08.07910.1016/j.matlet.2011.08.079 ↗
17. 10.1016/S1003-6326(11)60894-710.1016/S1003-6326(11)60894-7 ↗
18. 10.1016/j.jmbbm.2011.05.02610.1016/j.jmbbm.2011.05.026 ↗
19. 10.1016/j.matlet.2012.01.08610.1016/j.matlet.2012.01.086 ↗
20. Fu P · Mater. Sci. Eng. A · 2008 · 486 · 18310.1016/j.msea.2007.08.064 ↗
21. 10.1016/j.scriptamat.2005.03.03610.1016/j.scriptamat.2005.03.036 ↗
22. 10.1016/j.scriptamat.2010.07.03810.1016/j.scriptamat.2010.07.038 ↗
23. 10.5006/1.346291210.5006/1.3462912 ↗
24. 10.1007/s10800-007-9426-x10.1007/s10800-007-9426-x ↗