journal article·2007-03

Mechanical behaviour and texture of annealed AZ31 Mg alloy deformed by ECAP

C. W. Su, L. Lu, M. O. Lai

Materials Science and Technology· Volume 23· Issue 3
Publisher page

Abstract

AZ31 Mg alloy samples were processed by equal channel angular pressing (ECAP) at 220°C for four passes. An average grain size of ∼1·9 μm with reasonable homogeneity was obtained. The ECAP process imparted large plastic shear strains and strong deformation textures to the material. Subsequent annealing of the equal channel angular pressed samples produced interesting mechanical behaviours. While yield strength increased and ductility decreased immediately after undergoing ECAP, annealing at temperatures <250°C restored ductility significantly at a small decrease in of yield strength. Annealing at temperatures >250°C reduced yield strength without additional improvement in ductility. It is believed that the combination of stress relief via dislocation elimination, refined microstructure and the retention of a strong ECAP texture at low annealing temperatures enhance ductility. High temperature annealing breaks down the ECAP texture resulting in no further improvement in ductility. The results show that the mechanical properties of the alloy can be positively influenced by annealing after ECAP to achieve a combination of strength and ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Mordike B. L., and Ebert T.: Mater. Sci. Eng. A, 2001, A302, 37.10.1016/S0921-5093(00)01351-4 ↗
2. 10.1016/S0924-0136(01)00780-410.1016/S0924-0136(01)00780-4 ↗
3. Avedesian M. ‘ASM speciality handbook magnesium and magnesium alloys'; 1999, Materials Park, OH, ASM International.
4. 10.1016/S1359-6462(01)00996-410.1016/S1359-6462(01)00996-4 ↗
5. Agnew S. R. · Mater · 2004 · 50 · 377
6. Yamashita A., Horita Z., and Langdon T. G.: Mater. Sci. Eng. A, 2001, A300, 142.10.1016/S0921-5093(00)01660-9 ↗
7. Su C. W., Chua B. W., Lu L., and Lai M. O.: Mater. Sci. Eng. A, 2005, A402, 163.10.1016/j.msea.2005.04.035 ↗
8. 10.1016/S1471-5317(01)00008-610.1016/S1471-5317(01)00008-6 ↗
9. Segal V. M.: Mater. Sci. Eng. A, 1999, A271, 322.10.1016/S0921-5093(99)00248-8 ↗
10. 10.1016/S0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
11. Hwang S., Nishimura C., and McCormick P. G.: Mater. Sci. Eng. A, 2001, A318, 22.10.1016/S0921-5093(01)01767-1 ↗
12. Furukawa M., Iwahashi Y., Horita Z., Nemoto M., and Langdon T. G.: Mater. Sci. Eng. A, 1998, A257, 328.10.1016/S0921-5093(98)00750-3 ↗
13. 10.1016/S1359-6462(97)00132-210.1016/S1359-6462(97)00132-2 ↗
14. 10.1016/1359-6462(96)00107-810.1016/1359-6462(96)00107-8 ↗
15. Humphreys F. J., and Hatherly M. ‘Recrystallisation and related annealing phenomena'; 1995, Oxford, Pergamon.10.1016/B978-0-08-041884-1.50017-9 ↗
16. Frost H. J., and Ashby M. F. ‘Deformation mechanism maps’; 1982, New York, Pergamon press.
17. Agnew S. R., Mehrotra P., Lillo T. M., Stoica G. M., and Liaw P. K.: Mater. Sci. Eng. A, 2005, A408, 72.10.1016/j.msea.2005.07.052 ↗
18. Lin H. K., Huang J. C., and Langdon T. G.: Mater. Sci. Eng. A, 2005, A402, 250.10.1016/j.msea.2005.04.018 ↗
19. 10.1016/j.jallcom.2003.11.17310.1016/j.jallcom.2003.11.173 ↗
20. 10.1016/j.scriptamat.2005.03.03610.1016/j.scriptamat.2005.03.036 ↗
21. 10.1016/S0924-0136(03)00797-010.1016/S0924-0136(03)00797-0 ↗