Control of annealing texture and earing in non-hardenable aluminium alloys
Source abstract
Abstract
Factors affecting textures in non-hardenable aluminium alloys are considered on the basis of published results and some new experimental results. Emphasis is placed on conditions relevant to industrial scale rolling and annealing of sheet products. The most commonly observed texture components in these alloys are summarised, together with available evidence regarding their origins. Hot rolling conditions have a powerful effect on subsequent annealing textures, which is attributed to the microstructural state of the material before cold rolling. This can influence the relative frequency of different nucleation mechanisms. Heat treatment of the hot rolled band can also bring about marked changes in texture and earing for the same reason. The effect of cold rolling reduction on texture is complex and depends on the initial microstructure; increasing reduction promotes an increasingly heterogeneous substructure. The main impurity in these alloys is iron, which plays several different roles in controlling texture and earing level. Iron, both in solid solution and as coarse precipitates, can weaken the cube texture and promote 45° earing tendency. However, fine scale precipitation in the deformation substructure before recrystallisation may contribute to a strengthening of the cube texture. For high contents of iron and heavy rolling reductions, where continuous recrystallisation occurs, the rolling texture is retained or may even become strengthened. Influences of silicon, manganese, and magnesium are also discussed.MST/1295
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. 10.1080/0001873540010120310.1080/00018735400101203 ↗
2. THOALEY R. T. · J. Inst. Met. · 1957 · 86 · 353
3. BLADE J. C. · J. Inst. Met. · 1961 · 90 · 374
4. GREWEN J. · Z. Metallkd. · 1968 · 59 · 236
5. K. LÜCKE and T. HIRSCH: in ‘Aluminium technology '86’, 267; 1986, London, The Institute of Metals.
6. SIEBEL G. · Z. Metallkd. · 1956 · 47 · 102
7. 10.1007/978-3-662-13128-210.1007/978-3-662-13128-2 ↗
8. P. M. B. RODRIGUES, H. BICHSEL, and P. FURRER: in ‘Textures in non-ferrous metals and alloys’, (ed. H. D. Merchant and J. G. Morris), 45; 1984, Warrendale, PA, The Metallurgical Society of AIME.
9. 10.1016/0001-6160(87)90249-510.1016/0001-6160(87)90249-5 ↗
10. J. HIRSCH, W. MAO, and K. LOCKE: in ‘Aluminium technology '86’, 303; 1986, London, The Institute of Metals.
11. 10.1155/TSM.6.23110.1155/TSM.6.231 ↗
12. S. BAINBRIDGE and W. B. HUTCHINSON: unpublished work, University of Aston in Birmingham, 1980.
13. K. BROWN: in ‘Textures in non-ferrous metals and alloys’, (ed. H. D. Merchant and J. G. Morris), 131; 1984, Warrendale, PA, The Metallurgical Society of AIME.
14. 10.1016/0036-9748(89)90324-410.1016/0036-9748(89)90324-4 ↗
15. E. HORNBOGEN and H. KREYE: in ‘Textures in research and practice’, (ed. J. Grewen and G. Wassermann), 274; 1968, Berlin, Springer-Verlag.10.1007/978-3-662-13125-1_21 ↗
16. 10.1016/0001-6160(85)90015-X10.1016/0001-6160(85)90015-X ↗
17. 10.1016/0001-6160(83)90033-010.1016/0001-6160(83)90033-0 ↗
18. ROGERS D. H. · Z. Metallkd. · 1974 · 65 · 100
19. HAESSNER F. · Z. Metallkd. · 1956 · 47 · 743
20. J. HIELEN: PhD thesis, University of Trondheim, 1990.
21. 10.1179/msc.1974.8.1.7310.1179/msc.1974.8.1.73 ↗
22. 10.1179/mst.1986.2.1.810.1179/mst.1986.2.1.8 ↗
23. OSCARSSON A. · Paper presented at Conf. on ‘Microstructure and mechanical pro-cessing’, Cambridge, March 1990, to be published in Mater. Sci. Technol.
24. 10.1016/0001-6160(85)90176-210.1016/0001-6160(85)90176-2 ↗
25. J. HJELEN, E. NES, and R. MIER: in ‘Aluminum alloys — their physical and mechanical properties’, (ed. E. A. Starke and T. H. Sanders), Vol. I, 471; 1986, Charlottesville, VA, Engineer-ing Materials Advisory Services.
26. 10.1016/0036-9748(89)90366-910.1016/0036-9748(89)90366-9 ↗
27. W. G. FRICKE and H. B. McSHANE: in ‘Textures in non-ferrous metals and alloys’, (ed. H. D. Merchant and J. G. Morris), 17; 1984, Warrendale, PA, The Metallurgical Society of AIME.
28. 10.1179/mst.1989.5.11.111810.1179/mst.1989.5.11.1118 ↗
29. A. OSCARSSON: unpublished work, Swedish Institute for Metals Research, 1989.
30. 10.1007/BF0281494410.1007/BF02814944 ↗
31. B. ANDERSSON and S. E. NAESS: in ‘Aluminum alloys — their physical and mechanical properties’, (ed. E. A. Starke and T. H. Sanders), Vol. I, 499; 1986, Charlottesville, VA, Engineer-ing Materials Advisory Services.
32. NICOL B. · aecrystallization ‘90’,
33. GREWEN J. · Z. Metallkd. · 1968 · 59 · 205
34. P. N. KALU and F. J. HUMPHREYS: in ‘Aluminium technology '86’, 197; 1986, London, The Institute of Metals.
35. J. BLADE and P. L. MORRIS: in ‘Textures of materials’, Proc. ICOTOM4, (ed. G. J. Davies et al.), 171; 1975, London, The Metals Society.
36. 10.1179/03071698280328610610.1179/030716982803286106 ↗
37. B. ANDERSSON, S. E. NAESS, and H. P. FALKENSTEIN: in ‘Aluminium technology '86’, 339; 1986, London, The Institute of Metals.
38. B. A. PARKER, G. WILSON, and L. CHOK: in ‘Aluminum alloys — their physical and mechanical properties’, (ed. E. A. Starke and T. H. Sanders), Vol. I, 545; 1986, Charlottesville, VA, Engineering Materials Advisory Services.
39. EDGAR I. K. · Trans. AIME · 1949 · 180 · 225
40. OSCARSSON A. · Z. Metallkd. · 1988 · 79 · 600
41. MIKI I. · Z. Metallkd. · 1968 · 59 · 254
42. 10.1016/0001-6160(57)90109-810.1016/0001-6160(57)90109-8 ↗
43. BUNK W. · Z. Metallkd. · 1965 · 56 · 645
44. SUZUKI T. · Metall. Trans., 1985, I6A, 27
45. J. HIRSCH and K. LÜCKE: in 'Aluminum alloys — their physical and mechanical properties', (ed. E. A. Starke and T. H. Sanders), Vol. III, 1725; 1986, Charlottesville, VA, Engineering Materials Advisory Services.
46. 10.1179/msc.1974.8.1.18510.1179/msc.1974.8.1.185 ↗
47. HUTCHINSON W. B. · 1986 · 107
48. HUMPHREYS F. J. · 1980 · 93
49. HIRSCH J. R. · aecrystallization ‘90’,